Arthur Heymans (arthur@aheymans.xyz) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16295
-gerrit
commit e250fa33291fd69c7b9ee2bc0beb041dc88193ed Author: Arthur Heymans arthur@aheymans.xyz Date: Mon Aug 22 17:58:46 2016 +0200
gm45/gma.c: use screen on vga connector if connected
The intel x4x native graphic init works on gm45 to use the vga screen instead of the integrated lvds screen. This patch integrates it in gm45 in a way that the behavior is similar to vbios: If no vga display is connected the internal lvds screen is used. If an external screen is detected on the vga port it will be used instead.
Change-Id: I7e9ff793a5384ad8b4220fb1c0d9b28e6cee8391 Signed-off-by: Arthur Heymans arthur@aheymans.xyz --- src/northbridge/intel/gm45/gma.c | 155 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 152 insertions(+), 3 deletions(-)
diff --git a/src/northbridge/intel/gm45/gma.c b/src/northbridge/intel/gm45/gma.c index d5f6471..b520963 100644 --- a/src/northbridge/intel/gm45/gma.c +++ b/src/northbridge/intel/gm45/gma.c @@ -47,7 +47,7 @@ void gtt_write(u32 reg, u32 data) write32(res2mmio(gtt_res, reg, 0), data); }
-static void intel_gma_init(const struct northbridge_intel_gm45_config *info, +static void gma_init_lvds(const struct northbridge_intel_gm45_config *info, u8 *mmio, u32 physbase, u16 piobase, u32 lfb) {
@@ -344,6 +344,152 @@ static void intel_gma_init(const struct northbridge_intel_gm45_config *info, } }
+static void gma_init_vga(const struct northbridge_intel_gm45_config *info, + u8 *mmio) +{ + + int i; + u32 hactive, vactive; + + vga_gr_write(0x18, 0); + + write32(mmio + VGA0, 0x31108); + write32(mmio + VGA1, 0x31406); + + write32(mmio + ADPA, ADPA_DAC_ENABLE + | ADPA_PIPE_A_SELECT + | ADPA_CRT_HOTPLUG_MONITOR_COLOR + | ADPA_CRT_HOTPLUG_ENABLE + | ADPA_USE_VGA_HVPOLARITY + | ADPA_VSYNC_CNTL_ENABLE + | ADPA_HSYNC_CNTL_ENABLE + | ADPA_DPMS_ON + ); + + write32(mmio + 0x7041c, 0x0); + write32(mmio + DPLL_MD(0), 0x3); + write32(mmio + DPLL_MD(1), 0x3); + + vga_misc_write(0x67); + + const u8 cr[] = { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, + 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, + 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, + 0xff + }; + vga_cr_write(0x11, 0); + + for (i = 0; i <= 0x18; i++) + vga_cr_write(i, cr[i]); + + /* Disable screen memory to prevent garbage from appearing. */ + vga_sr_write(1, vga_sr_read(1) | 0x20); + + hactive = 640; + vactive = 400; + + mdelay(1); + write32(mmio + FP0(0), 0x31108); + write32(mmio + DPLL(0), + DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL + | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 + | 0x10601 + ); + mdelay(1); + write32(mmio + DPLL(0), + DPLL_VCO_ENABLE | DPLLB_MODE_DAC_SERIAL + | DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 + | 0x10601 + ); + + write32(mmio + ADPA, ADPA_DAC_ENABLE + | ADPA_PIPE_A_SELECT + | ADPA_CRT_HOTPLUG_MONITOR_COLOR + | ADPA_CRT_HOTPLUG_ENABLE + | ADPA_USE_VGA_HVPOLARITY + | ADPA_VSYNC_CNTL_ENABLE + | ADPA_HSYNC_CNTL_ENABLE + | ADPA_DPMS_ON + ); + + write32(mmio + HTOTAL(0), + ((hactive - 1) << 16) + | (hactive - 1)); + write32(mmio + HBLANK(0), + ((hactive - 1) << 16) + | (hactive - 1)); + write32(mmio + HSYNC(0), + ((hactive - 1) << 16) + | (hactive - 1)); + + write32(mmio + VTOTAL(0), ((vactive - 1) << 16) + | (vactive - 1)); + write32(mmio + VBLANK(0), ((vactive - 1) << 16) + | (vactive - 1)); + write32(mmio + VSYNC(0), + ((vactive - 1) << 16) + | (vactive - 1)); + + write32(mmio + PIPECONF(0), PIPECONF_DISABLE); + + write32(mmio + PF_WIN_POS(0), 0); + + write32(mmio + PIPESRC(0), (639 << 16) | 399); + write32(mmio + PF_CTL(0), PF_ENABLE | PF_FILTER_MED_3x3); + write32(mmio + PF_WIN_SZ(0), vactive | (hactive << 16)); + write32(mmio + PFIT_CONTROL, 0xa0000000); + + mdelay(1); + + write32(mmio + 0x000f000c, 0x00002040); + mdelay(1); + write32(mmio + 0x000f000c, 0x00002050); + write32(mmio + 0x00060100, 0x00044000); + mdelay(1); + write32(mmio + PIPECONF(0), PIPECONF_ENABLE + | PIPECONF_BPP_6 | PIPECONF_DITHER_EN); + + write32(mmio + VGACNTRL, 0x0); + write32(mmio + DSPCNTR(0), DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888); + mdelay(1); + + write32(mmio + ADPA, ADPA_DAC_ENABLE + | ADPA_PIPE_A_SELECT + | ADPA_CRT_HOTPLUG_MONITOR_COLOR + | ADPA_CRT_HOTPLUG_ENABLE + | ADPA_USE_VGA_HVPOLARITY + | ADPA_VSYNC_CNTL_ENABLE + | ADPA_HSYNC_CNTL_ENABLE + | ADPA_DPMS_ON + ); + + vga_textmode_init(); + + /* Enable screen memory. */ + vga_sr_write(1, vga_sr_read(1) & ~0x20); + + /* Clear interrupts. */ + write32(mmio + DEIIR, 0xffffffff); + write32(mmio + SDEIIR, 0xffffffff); +} + +/* compare the header of the vga edid header + if vga is not connected it should not have a correct header */ +static u8 vga_connected(u8 *mmio) +{ + u8 vga_edid[128]; + u8 header[8] = {0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00}; + intel_gmbus_read_edid(mmio + GMBUS0, 2, 0x50, vga_edid, 128); + for (int i = 0; i < 8; i++) { + if (vga_edid[i] != header[i]) { + printk(BIOS_SPEW, "VGA not connected. Using LVDS display\n"); + return 0; + } + } + printk(BIOS_SPEW, "VGA display connected\n"); + return 1; +} + static void gma_pm_init_post_vbios(struct device *const dev) { const struct northbridge_intel_gm45_config *const conf = dev->chip_info; @@ -419,8 +565,11 @@ static void gma_func0_init(struct device *dev) printk(BIOS_SPEW, "Initializing VGA without OPROM. MMIO 0x%llx\n", gtt_res->base); - intel_gma_init(conf, res2mmio(gtt_res, 0, 0), physbase, - pio_res->base, lfb_res->base); + if (vga_connected(res2mmio(gtt_res, 0, 0))) + gma_init_vga(conf, res2mmio(gtt_res, 0, 0)); + else + gma_init_lvds(conf, res2mmio(gtt_res, 0, 0), + physbase, pio_res->base, lfb_res->base); }
/* Linux relies on VBT for panel info. */
-
Arthur Heymans