[M] Change in coreboot[main]: mb/goog/brya/var/skolas: sync slolas overridetree with brya0

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/79121?usp=email )

Change subject: mb/goog/brya/var/skolas: sync slolas overridetree with brya0
......................................................................

mb/goog/brya/var/skolas: sync slolas overridetree with brya0

Skolas uses brya0 schematic, so override tree should be almost the same
for brya0 and skolas.  This change sync's the skolas overridetree.cb
with brya0's overridetree.cb.

BUG=b:311722825
BRANCH=firmware-brya-14505.B
TEST=`emerge-brya coreboot chromeos-bootimage`, flash and boot skolas to
kernel.

Change-Id: I14a2ed803a8ffb8614018af587c66034fb724b38
Signed-off-by: Nick Vaccaro 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79121
Tested-by: build bot (Jenkins) 
Reviewed-by: Eric Lai 
---
M src/mainboard/google/brya/variants/skolas/overridetree.cb
1 file changed, 81 insertions(+), 6 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Eric Lai: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/skolas/overridetree.cb b/src/mainboard/google/brya/variants/skolas/overridetree.cb
index 388ea4f..bb6d1ea 100644
--- a/src/mainboard/google/brya/variants/skolas/overridetree.cb
+++ b/src/mainboard/google/brya/variants/skolas/overridetree.cb
@@ -132,7 +132,7 @@
    			# TCP1 (DP-2) for port C1
    			register "device[3].name" = ""DD03""
    			register "device[3].use_pld" = "true"
-                                register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+				register "device[3].pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
    			# TCP2 (DP-3) for port C2
    			register "device[4].name" = ""DD04""
    			register "device[4].use_pld" = "true"
@@ -548,7 +548,9 @@
    			register "link_freq[1]" = "180 * MHz" # 180 MHz
    			register "remote_name" = ""IPU0""

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
    			register "has_power_resource" = "1"
+
    			#Controls
    			register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
    			register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
@@ -582,9 +584,23 @@
    			register "chip_name" = ""DW9768 VCM""
    			register "device_type" = "INTEL_ACPI_CAMERA_VCM"

-				register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC""
    			register "vcm_compat" = ""dongwoon,dw9768""

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
    			device i2c 0C on
    				probe WFC WFC_MIPI_OVTI8856
    			end
@@ -595,7 +611,6 @@
    			register "chip_name" = ""AT24 EEPROM""
    			register "device_type" = "INTEL_ACPI_CAMERA_NVM"

-				register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC""
    			register "nvm_compat" = ""atmel,24c1024""

register "nvm_size" = "0x2800"
@@ -603,6 +618,21 @@
    			register "nvm_readonly" = "0x01"
    			register "nvm_width" = "0x10"

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
    			device i2c 58 on
    				probe WFC WFC_MIPI_OVTI8856
    			end
@@ -623,6 +653,8 @@
    			register "link_freq[1]" = "180 * MHz" # 180 MHz
    			register "remote_name" = ""IPU0""

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
    			register "has_power_resource" = "1"
    			#Controls
    			register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
@@ -657,9 +689,23 @@
    			register "chip_name" = ""DW AF DAC""
    			register "device_type" = "INTEL_ACPI_CAMERA_VCM"

-				register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC""
    			register "vcm_compat" = ""dongwoon,dw9714""

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
    			device i2c 0C on
    				probe WFC WFC_MIPI_KBAE350
    			end
@@ -670,7 +716,6 @@
    			register "chip_name" = ""GT24C08""
    			register "device_type" = "INTEL_ACPI_CAMERA_NVM"

-				register "pr0" = ""\_SB.PCI0.I2C0.CAM0.PRIC""
    			register "nvm_compat" = ""atmel,24c08""

register "nvm_size" = "0x2000"
@@ -678,6 +723,21 @@
    			register "nvm_readonly" = "0x01"
    			register "nvm_width" = "0x10"

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_WCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
    			device i2c 50 on
    				probe WFC WFC_MIPI_KBAE350
    			end
@@ -800,6 +860,7 @@
    			register "link_freq[0]" = "384 * MHz" # 384 MHz
    			register "link_freq[1]" = "96 * MHz" # 96 MHz
    			register "remote_name" = ""IPU0""
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"

register "has_power_resource" = "1"
    			#Controls
@@ -834,7 +895,6 @@
    			register "chip_name" = ""GT24C16S""
    			register "device_type" = "INTEL_ACPI_CAMERA_NVM"

-				register "pr0" = ""\_SB.PCI0.I2C2.CAM1.PRIC""
    			register "nvm_compat" = ""atmel,24c1024""

register "nvm_size" = "0x800"
@@ -842,6 +902,21 @@
    			register "nvm_readonly" = "0x01"
    			register "nvm_width" = "0x08"

+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_C3" #PP3300_FCAM_X
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
    			device i2c 50 on
    				probe UFC UFC_MIPI_IMX208
    			end