Change in coreboot[master]: mb/clevo/l140cu: Align comment with rest of the devicetree

[Michael Niewöhner (Code Review)]

Michael Niewöhner has submitted this change. ( https://review.coreboot.org/c/coreboot/+/45884 )

Change subject: mb/clevo/l140cu: Align comment with rest of the devicetree
......................................................................

mb/clevo/l140cu: Align comment with rest of the devicetree

Change-Id: Idcaedd3d5b7e465644f79e5a882e42eff040fdbd
Signed-off-by: Felix Singer 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45884
Tested-by: build bot (Jenkins) 
Reviewed-by: Michael Niewöhner 
---
M src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb
1 file changed, 2 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Michael Niewöhner: Looks good to me, approved

diff --git a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb
index e079dff..3ee20e9 100644
--- a/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb
+++ b/src/mainboard/clevo/cml-u/variants/l140cu/devicetree.cb
@@ -94,7 +94,7 @@
    		device pci 14.3 on end
    	end
    	device pci 14.5 off end # SDCard
-		device pci 15.0 on
+		device pci 15.0 on	# I2C #0
    		chip drivers/i2c/hid
    			register "generic.hid" = ""ELAN040D""
    			register "generic.desc" = ""ELAN Touchpad""
@@ -103,7 +103,7 @@
    			register "hid_desc_reg_offset" = "0x01"
    			device i2c 15 on end
    		end
-		end # I2C #0
+		end
    	device pci 15.1 off end # I2C #1
    	device pci 15.2 off end # I2C #2
    	device pci 15.3 off end # I2C #3