Change in coreboot[master]: mb/libretrend/lt1000: Add Libretrend LT1000 board support

[Michał Żygowski (Code Review)]

Michał Żygowski has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/30360 )

Change subject: mb/libretrend/lt1000: Add Libretrend LT1000 board support
......................................................................

Patch Set 15:

(2 comments)

https://review.coreboot.org/c/coreboot/+/30360/13/Documentation/mainboard/li... 
File Documentation/mainboard/libretrend/lt1000.jpg:

PS13:
> Sorry, I think I prefer the previous one. […]

it's here: http://www.minicase.net/product_LR-i7S65T1.html

https://review.coreboot.org/c/coreboot/+/30360/15/src/mainboard/libretrend/l... 
File src/mainboard/libretrend/lt1000/bootblock.c:

https://review.coreboot.org/c/coreboot/+/30360/15/src/mainboard/libretrend/l... 
PS15, Line 14: #define SERIAL1_DEV	PNP_DEV(0x2e, IT8786E_SP1)
> Where is SERIAL2_DEV ?

All serial ports except port 2 have the same initial io base = 0x3f8. If all enabled in one sway, it horribly slows down the boot process. port is is safe, because initial value is 0x2f8.