Change in ...coreboot[master]: src/soc/intel/braswell/southcluster.c: Correct serial IRQ support

[Frans Hendriks (Code Review)]

Frans Hendriks has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/29398 )

Change subject: src/soc/intel/braswell/southcluster.c: Correct serial IRQ support
......................................................................

Patch Set 5:

(1 comment)

https://review.coreboot.org/#/c/29398/5/src/soc/intel/braswell/Kconfig 
File src/soc/intel/braswell/Kconfig:

https://review.coreboot.org/#/c/29398/5/src/soc/intel/braswell/Kconfig@137 
PS5, Line 137: 
             : config ENABLE_SERIRQ
             : 	bool "Enable Serial IRQ"
             : 	default n
             : 	help
             : 	  Enable Serial IRQ
             : 
             : config SERIRQ_CONTINUOUS_MODE
             : 	bool "Serial IRQ continuous mode"
             : 	default n
             : 	depends on ENABLE_SERIRQ
             : 	help
             : 	  Enable Serial IRQ continuous mode
> are there boards which use this for which you'd want to disable it conditionally? If not, setting it […]

'Actual boards' use the 'old' code which does not enable the serial IRQ. 
I'm not sure if the serial IRQ is expected to be disabled or enabled for these board.