Patch set updated for coreboot: fd1a70a cubieboard: Configure system voltages from devicetree

[Alexandru Gagniuc]

Alexandru Gagniuc ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4640

-gerrit

commit fd1a70a933ec4cdd61ab5b831f9d4f356e60f847
Author: Alexandru Gagniuc 
Date:   Thu Jan 9 20:45:21 2014 -0600

cubieboard: Configure system voltages from devicetree

Change-Id: I93bac9bf94f5bafcd3ff0c3d5763b31d3ee9959b
    Signed-off-by: Alexandru Gagniuc 
---
 src/mainboard/cubietech/cubieboard/Kconfig       |  1 +
 src/mainboard/cubietech/cubieboard/devicetree.cb |  9 ++++
 src/mainboard/cubietech/cubieboard/romstage.c    | 58 ++++++++++++++++++++++++
 3 files changed, 68 insertions(+)

diff --git a/src/mainboard/cubietech/cubieboard/Kconfig b/src/mainboard/cubietech/cubieboard/Kconfig
index 72b797e..6cb84cf 100644
--- a/src/mainboard/cubietech/cubieboard/Kconfig
+++ b/src/mainboard/cubietech/cubieboard/Kconfig
@@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
    select ARCH_ARMV7
    select CPU_ALLWINNER_A10
    select BOARD_ROMSIZE_KB_4096
+	select DRIVER_XPOWERS_AXP209

config MAINBOARD_DIR
    string
diff --git a/src/mainboard/cubietech/cubieboard/devicetree.cb b/src/mainboard/cubietech/cubieboard/devicetree.cb
index 1358777..65ea5ff 100644
--- a/src/mainboard/cubietech/cubieboard/devicetree.cb
+++ b/src/mainboard/cubietech/cubieboard/devicetree.cb
@@ -1,3 +1,12 @@
 chip cpu/allwinner/a10
    device cpu_cluster 0 on end
+
+	chip drivers/xpowers/axp209	# AXP209 is on I²C 0
+		device i2c 0x34 on end
+		register "dcdc2_voltage_mv" = "1400"	# Vcore
+		register "dcdc3_voltage_mv" = "1250"	# DLL Vdd
+		register "ldo2_voltage_mv" = "3000"	# AVCC
+		register "ldo3_voltage_mv" = "2800"	# NC?
+		register "ldo4_voltage_mv" = "2800"	# CSI1-IO-2V8
+	end
 end
diff --git a/src/mainboard/cubietech/cubieboard/romstage.c b/src/mainboard/cubietech/cubieboard/romstage.c
index 19192cd..6d422d6 100644
--- a/src/mainboard/cubietech/cubieboard/romstage.c
+++ b/src/mainboard/cubietech/cubieboard/romstage.c
@@ -6,9 +6,67 @@
  */

#include <console/console.h>
+#include <cpu/allwinner/a10/clock.h>
+#include <cpu/allwinner/a10/gpio.h>
+#include <cpu/allwinner/a10/twi.h>
+#define __SIMPLE_DEVICE__
+#include <device/device.h>
+#include <drivers/xpowers/axp209/axp209.h>
+#include <drivers/xpowers/axp209/chip.h>
+
+
+#define GPB_TWI0_FUNC			2
+#define GPB_TWI0_PINS			((1 << 0) | (1 << 1))
+
+#define AXP209_BUS	0
+
+static enum cb_err cubieboard_setup_power(void)
+{
+	enum cb_err err;
+	const struct device * pmu;
+	const struct drivers_xpowers_axp209_config *cfg;
+
+	/* Find the AXP209 in devicetree */
+	pmu = dev_find_slot_on_smbus(AXP209_BUS, AXP209_I2C_ADDR);
+	if (!pmu) {
+		printk(BIOS_ERR, "AXP209 not found in devicetree.cb\n");
+		return CB_ERR;
+	}
+
+	cfg = pmu->chip_info;
+
+	/* Mux TWI0 pins */
+	gpio_set_multipin_func(GPB, GPB_TWI0_PINS, GPB_TWI0_FUNC);
+	/* Enable TWI0 */
+	a1x_periph_clock_enable(A1X_CLKEN_TWI0);
+	a1x_twi_init(AXP209_BUS, 400000);
+
+	if ((err = axp209_init(AXP209_BUS)) != CB_SUCCESS) {
+		printk(BIOS_ERR, "PMU initialization failed\n");
+		return err;
+	}
+
+	if ((err = axp209_set_voltages(AXP209_BUS, cfg)) != CB_SUCCESS) {
+		printk(BIOS_WARNING, "Power setup incomplete: "
+				     "CPU may hang when increasing clock\n");
+		return err;
+	}
+
+	printk(BIOS_SPEW, "DCDC2 %i\n", cfg->dcdc2_voltage_mv);
+	printk(BIOS_SPEW, "DCDC3 %i\n", cfg->dcdc3_voltage_mv);
+	printk(BIOS_SPEW, "LDO2  %i\n", cfg->ldo2_voltage_mv);
+	printk(BIOS_SPEW, "LDO3  %i\n", cfg->ldo3_voltage_mv);
+	printk(BIOS_SPEW, "LDO4  %i\n", cfg->ldo4_voltage_mv);
+
+	return CB_SUCCESS;
+}

void main(void)
 {
    console_init();
    printk(BIOS_INFO, "You have managed to succesfully load romstage.\n");
+
+	/* Configure power rails */
+	cubieboard_setup_power();
+
 }