[M] Change in coreboot[main]: mb/google/brya/var/trulo: Populate DRAM configuration parameters

[Subrata Banik (Code Review)]

Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/83541?usp=email )

(

1 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: mb/google/brya/var/trulo: Populate DRAM configuration parameters
......................................................................

mb/google/brya/var/trulo: Populate DRAM configuration parameters

This patch adds key DRAM configuration parameters as below:
- Rcomp
- DQ byte map
- DQS CPU<>DRAM map
- ECT
- CCC Mapping
- SPD Index

Source: Trulo Schematics Rev0.5 (dated June'24)

BUG=b:351976770
TEST=Able to build google/trulo.

Change-Id: Ie7abc393a71becf26d53ae9e4fc56f66c7117051
Signed-off-by: Subrata Banik 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83541
Tested-by: build bot (Jenkins) 
Reviewed-by: Dinesh Gehlot 
---
M src/mainboard/google/brya/variants/trulo/Makefile.mk
A src/mainboard/google/brya/variants/trulo/memory.c
2 files changed, 113 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Dinesh Gehlot: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/trulo/Makefile.mk b/src/mainboard/google/brya/variants/trulo/Makefile.mk
index c3c135b..87f515a 100644
--- a/src/mainboard/google/brya/variants/trulo/Makefile.mk
+++ b/src/mainboard/google/brya/variants/trulo/Makefile.mk
@@ -2,6 +2,7 @@

bootblock-y += gpio.c
 romstage-y += gpio.c
+romstage-y += memory.c
 ramstage-y += gpio.c

ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB) += hda_verb.c
diff --git a/src/mainboard/google/brya/variants/trulo/memory.c b/src/mainboard/google/brya/variants/trulo/memory.c
new file mode 100644
index 0000000..a6f16db
--- /dev/null
+++ b/src/mainboard/google/brya/variants/trulo/memory.c
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/variants.h>
+#include <gpio.h>
+#include <soc/romstage.h>
+
+static const struct mb_cfg variant_memcfg = {
+	.type = MEM_TYPE_LP5X,
+
+	.rcomp = {
+		/* Baseboard uses only 100ohm Rcomp resistors */
+		.resistor = 100,
+	},
+
+	/* DQ byte map */
+	.lpx_dq_map = {
+		.ddr0 = {
+			.dq0 = { 12,  9, 10, 11, 14, 13,  8, 15 },
+			.dq1 = {  3,  1,  2,  0,  4,  7,  5,  6 },
+		},
+		.ddr1 = {
+			.dq0 = {  3,  1,  2,  0,  4,  7,  5,  6 },
+			.dq1 = { 13,  9,  8, 11, 10, 14, 15, 12 },
+		},
+		.ddr2 = {
+			.dq0 = {  2,  1,  3,  0,  4,  6,  5,  7 },
+			.dq1 = {  8,  9, 10, 11, 13, 14, 12, 15 },
+		},
+		.ddr3 = {
+			.dq0 = {  3,  0,  1,  2,  5,  6,  4,  7 },
+			.dq1 = { 13,  9, 11,  8, 14, 15, 10, 12 },
+		},
+		.ddr4 = {
+			.dq0 = { 12,  9, 10, 11, 14, 13,  8, 15 },
+			.dq1 = {  3,  1,  2,  0,  4,  7,  5,  6 },
+		},
+		.ddr5 = {
+			.dq0 = {  3,  1,  2,  0,  4,  7,  5,  6 },
+			.dq1 = { 13,  9,  8, 11, 10, 14, 15, 12 },
+		},
+		.ddr6 = {
+			.dq0 = {  2,  1,  3,  0,  4,  6,  5,  7 },
+			.dq1 = {  8,  9, 10, 11, 13, 14, 12, 15 },
+		},
+		.ddr7 = {
+			.dq0 = {  3,  0,  1,  2,  5,  6,  4,  7 },
+			.dq1 = { 13,  9, 11,  8, 14, 15, 10, 12 },
+		},
+	},
+
+	/* DQS CPU<>DRAM map */
+	.lpx_dqs_map = {
+		.ddr0 = { .dqs0 = 1, .dqs1 = 0 },
+		.ddr1 = { .dqs0 = 0, .dqs1 = 1 },
+		.ddr2 = { .dqs0 = 0, .dqs1 = 1 },
+		.ddr3 = { .dqs0 = 0, .dqs1 = 1 },
+		.ddr4 = { .dqs0 = 1, .dqs1 = 0 },
+		.ddr5 = { .dqs0 = 0, .dqs1 = 1 },
+		.ddr6 = { .dqs0 = 0, .dqs1 = 1 },
+		.ddr7 = { .dqs0 = 0, .dqs1 = 1 },
+	},
+
+	.lp5x_config = {
+		.ccc_config = 0xff,
+	},
+
+	.ect = 1, /* Early Command Training */
+
+	.UserBd = BOARD_TYPE_MOBILE,
+};
+
+const struct mb_cfg *variant_memory_params(void)
+{
+	return &variant_memcfg;
+}
+
+int variant_memory_sku(void)
+{
+	/*
+	 * Memory configuration board straps
+	 * GPIO_MEM_CONFIG_0	GPP_E2
+	 * GPIO_MEM_CONFIG_1	GPP_E1
+	 * GPIO_MEM_CONFIG_2	GPP_E12
+	 * GPIO_MEM_CONFIG_3	NC
+	 */
+	gpio_t spd_gpios[] = {
+		GPP_E2,
+		GPP_E1,
+		GPP_E12,
+	};
+
+	return gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios));
+}
+
+bool variant_is_half_populated(void)
+{
+	/*
+	 * Ideally half_populated is used in platforms with multiple channels to
+	 * enable only one half of the channel. Alder Lake N has single channel,
+	 * and it would require for new structures to be defined in meminit block
+	 * driver for LPx memory configurations. In order to avoid adding new
+	 * structures, set half_populated to true. This has the same effect as
+	 * having single channel with 64-bit width.
+	*/
+	return true;
+}
+
+void variant_get_spd_info(struct mem_spd *spd_info)
+{
+	spd_info->topo = MEM_TOPO_MEMORY_DOWN;
+	spd_info->cbfs_index = variant_memory_sku();
+}