Marshall Dawson has uploaded this change for review. ( https://review.coreboot.org/28470
Change subject: arch/x86: Add BERT region support functions ......................................................................
arch/x86: Add BERT region support functions
Add code for generating the region pointed to in an ACPI Boot Error Record Table.
The BERT region must be reported as Reserved to the OSPM, so this code calls out to a system-specific region locator. cbmem is reported as type 16 and is not usable for the BERT region.
Events reported via BERT are Generic Error Data, and are constructed as follows (see ACPI and UEFI specs for reference): * Each event begins with a Generic Error Status Block, which may contain zero or more Generic Data Entries * Each Generic Data Entry is identifiable by its Section Type field, and the data structures associated are also in the UEFI spec. * The GUIDs are listed in the Section Type field of the CPER Section Descriptor structure. BERT doesn't use this structure but simply uses its GUIDs. * Data structures used in the Generic Data Entry are named as Error Sections in the UEFI spec. * Some sections may optionally include a variable number of additional structures, e.g. an IA32/X64 processor error can report error information as well as machine contexts.
It is worth noting that the Linux kernel (as of v4.4) does not attempt to parse IA32/X64 sections, and opts to hexdump them instead.
BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system.
Change-Id: I54826981639b5647a8ca33b8b55ff097681402b9 Signed-off-by: Marshall Dawson marshalldawson3rd@gmail.com --- M src/Kconfig M src/arch/x86/Makefile.inc A src/arch/x86/acpi_bert_storage.c A src/arch/x86/include/arch/bert_storage.h 4 files changed, 716 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/70/28470/1
diff --git a/src/Kconfig b/src/Kconfig index bce3e32..ca75c0b 100644 --- a/src/Kconfig +++ b/src/Kconfig @@ -586,6 +586,12 @@ help Build support for NHLT (non HD Audio) ACPI table generation.
+config ACPI_BERT + bool + depends on HAVE_ACPI_TABLES + help + Build an ACPI Boot Error Record Table. + #These Options are here to avoid "undefined" warnings. #The actual selection and help texts are in the following menu.
diff --git a/src/arch/x86/Makefile.inc b/src/arch/x86/Makefile.inc index 1d9ee4d..3c4bc1f 100644 --- a/src/arch/x86/Makefile.inc +++ b/src/arch/x86/Makefile.inc @@ -291,6 +291,7 @@ ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi_device.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi_pld.c ramstage-$(CONFIG_HAVE_ACPI_RESUME) += acpi_s3.c +ramstage-$(CONFIG_ACPI_BERT) += acpi_bert_storage.c ramstage-y += boot.c ramstage-y += c_start.S ramstage-y += cbmem.c diff --git a/src/arch/x86/acpi_bert_storage.c b/src/arch/x86/acpi_bert_storage.c new file mode 100644 index 0000000..826c14c --- /dev/null +++ b/src/arch/x86/acpi_bert_storage.c @@ -0,0 +1,542 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2015 Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <bootstate.h> +#include <cbmem.h> +#include <console/console.h> +#include <cpu/x86/name.h> /* todo: support on other architectures */ +#include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> +#include <arch/acpi.h> +#include <arch/bert_storage.h> +#include <string.h> + +/* BERT region management: Allow the chipset to determine the specific + * location of the BERT region. We find that base and size, then manage + * the allocation of error information within it. + * + * Use simple static variables for managing the BERT region. This is a thin + * implementation; it is only created and consumed by coreboot, and only in + * a single stage, and we don't want its information to survive reboot or + * resume cycles. If the requirements change, consider using IMD to help + * manage the space. + */ +static int bert_region_broken; +static void *bert_region_base; +static size_t bert_region_size; +static size_t bert_region_used; + +/* Calculate the remaining space in the BERT region. This knowledge may help + * the caller prioritize the information to store. + */ +size_t bert_storage_remaining(void) +{ + return bert_region_broken ? 0 : bert_region_size - bert_region_used; +} + +int bert_errors_present(void) +{ + return bert_region_broken ? 0 : !!bert_region_used; +} + +void bert_errors_region(void **start, size_t *size) +{ + if (bert_region_broken) { + *start = NULL; + *size = 0; + return; + } + + /* No metadata, etc. with our region, so this is easy */ + *start = bert_region_base; + *size = bert_region_used; +} + +static void *bert_allocate_storage(size_t size) +{ + size_t alloc; + + if (bert_region_broken) + return NULL; + if (bert_region_used + size > bert_region_size) + return NULL; + + alloc = bert_region_used; + bert_region_used += size; + + return (void *)((u8 *)bert_region_base + alloc); +} + +/* Generic Error Status: Each Status represents a unique error event within + * the BERT errors region. Each event may have multiple errors associated + * with it. + */ + +/* Update data_length for this Error Status, and final Data Entry it contains */ +static void revise_error_sizes(acpi_generic_error_status_t *status, size_t size) +{ + acpi_hest_generic_data_v300_t *entry; + int entries; + + if (!status) + return; + + entries = bert_entry_count(status); + entry = acpi_hest_generic_data_nth(status, entries); + status->data_length += size; + if (entry) + entry->data_length += size; +} + +/* Create space for a new BERT Generic Error Status Block, by finding the next + * available slot and moving the ending location. There is nothing to designate + * this as another Generic Error Status Block (e.g. no signature); only that it + * is within the BERT region. + * + * It is up to the caller to correctly fill the information, including status + * and error severity, and to update/maintain data offsets and lengths as + * entries are added. + */ +static acpi_generic_error_status_t *new_bert_status(void) +{ + acpi_generic_error_status_t *status; + + status = bert_allocate_storage(sizeof(*status)); + + if (!status) { + printk(BIOS_ERR, "Error: New BERT error entry would exceed available region\n"); + return NULL; + } + + status->error_severity = ACPI_GENERROR_SEV_NONE; + return status; +} + +/* Generic Error Data: Each Generic Error Status may contain zero or more + * Generic Error Data structures. The data structures describe particular + * error(s) associated with an event. The definition for the structure is + * found in the ACPI spec, however the data types and any accompanying data + * definitions are in the Common Platform Error Record appendix of the UEFI + * spec. + */ + +/* Create space for a new BERT Generic Data Entry. Update the count and + * data length in the parent Generic Error Status Block. Version 0x300 of + * the structure is used, and the timestamp is filled and marked precise + * (i.e. assumed close enough for reporting). + * + * It is up to the caller to fill the Section Type field and add the Common + * Platform Error Record type data as appropriate. In addition, the caller + * should update the error severity, and may optionally add FRU information + * or override any existing information. + */ +static acpi_hest_generic_data_v300_t *new_generic_error_entry( + acpi_generic_error_status_t *status) +{ + acpi_hest_generic_data_v300_t *entry; + + if (bert_entry_count(status) == GENERIC_ERR_STS_ENTRY_COUNT_MAX) { + printk(BIOS_ERR, "Error: New BERT error would exceed maximum entries\n"); + return NULL; + } + + entry = bert_allocate_storage(sizeof(*entry)); + if (!entry) { + printk(BIOS_ERR, "Error: New BERT error entry would exceed available region\n"); + return NULL; + } + + entry->revision = HEST_GENERIC_ENTRY_V300; + + entry->timestamp = cper_timestamp(CPER_TIMESTAMP_PRECISE); + entry->validation_bits |= ACPI_GENERROR_VALID_TIMESTAMP; + + status->data_length += sizeof(*entry); + bert_bump_entry_count(status); + + return entry; +} + +/* Find the size of a CPER error section w/o any add-ons */ +static size_t sizeof_error_section(guid_t *guid) +{ + if (!guidcmp(guid, &CPER_SEC_PROC_GENERIC_GUID)) + return sizeof(cper_proc_generic_error_section_t); + else if (!guidcmp(guid, &CPER_SEC_PROC_IA32X64_GUID)) + return sizeof(cper_ia32x64_proc_error_section_t); + /* else if ... sizeof(structures not yet defined) */ + + printk(BIOS_ERR, "Error: requested size of unrecognized CPER GUID\n"); + return 0; +} + +/* Append a new ACPI Generic Error Data Entry plus CPER Error Section to an + * existing ACPI Generic Error Status Block. The caller is responsible for + * the setting the status and entry severity, as well as populating all fields + * of the error section. + */ +acpi_hest_generic_data_v300_t *bert_append_error_datasection( + acpi_generic_error_status_t *status, guid_t *guid) +{ + acpi_hest_generic_data_v300_t *entry; + void *sect; + size_t sect_size; + + sect_size = sizeof_error_section(guid); + if (!sect_size) + return NULL; /* Don't allocate structure if bad GUID passed */ + + if (sizeof(*entry) + sect_size > bert_storage_remaining()) + return NULL; + + entry = new_generic_error_entry(status); + if (!entry) + return NULL; + + /* error section immediately follows the Generic Error Data Entry */ + sect = bert_allocate_storage(sect_size); + if (!sect) + return NULL; + + revise_error_sizes(status, sect_size); + + guidcpy(&entry->section_type, guid); + return entry; +} + +/* Helper to append an ACPI Generic Error Data Entry plus a CPER Processor + * Generic Error Section. As many fields are populated as possible for the + * caller. + */ +acpi_hest_generic_data_v300_t *bert_append_genproc( + acpi_generic_error_status_t *status) +{ + acpi_hest_generic_data_v300_t *entry; + cper_proc_generic_error_section_t *ges; + + entry = bert_append_error_datasection(status, + &CPER_SEC_PROC_GENERIC_GUID); + if (!entry) + return NULL; + + status->block_status |= GENERIC_ERR_STS_UNCORRECTABLE_VALID; + status->error_severity = ACPI_GENERROR_SEV_FATAL; + + entry->error_severity = ACPI_GENERROR_SEV_FATAL; + + ges = section_of_acpientry(ges, entry); + + ges->proc_type = GENPROC_PROCTYPE_IA32X64; + ges->validation |= GENPROC_VALID_PROC_TYPE; + + ges->cpu_version = cpuid_eax(1); + ges->validation |= GENPROC_VALID_CPU_VERSION; + + fill_processor_name(ges->cpu_brand_string); + ges->validation |= GENPROC_VALID_CPU_BRAND; + + ges->proc_id = lapicid(); + ges->validation |= GENPROC_VALID_CPU_ID; + + return entry; +} + +/* Add a new IA32/X64 Processor Context Structure (Table 261), following any + * other contexts, to an existing Processor Error Section (Table 255). Contexts + * may only be added after the entire Processor Error Info array has been + * created. + * + * This function fills only the minimal amount of information required to parse + * or step through the contexts. The type is filled and PROC_CONTEXT_INFO_NUM + * is updated. + * + * type is one of: + * CPER_IA32X64_CTX_UNCL + * CPER_IA32X64_CTX_MSR + * CPER_IA32X64_CTX_32BIT_EX + * CPER_IA32X64_CTX_64BIT_EX + * CPER_IA32X64_CTX_FXSAVE + * CPER_IA32X64_CTX_32BIT_DBG + * CPER_IA32X64_CTX_64BIT_DBG + * CPER_IA32X64_CTX_MEMMAPPED + * num is the number of bytes eventually used to fill the context's register + * array, e.g. 4 MSRs * sizeof(msr_t) + * + * status and entry data_length values are updated. + */ +cper_ia32x64_context_t *new_cper_ia32x64_ctx( + acpi_generic_error_status_t *status, + cper_ia32x64_proc_error_section_t *x86err, int type, int num) +{ + size_t size; + cper_ia32x64_context_t *ctx; + static const char * const ctx_names[] = { + "Unclassified Data", + "MSR Registers", + "32-bit Mode Execution", + "64-bit Mode Execution", + "FXSAVE" + "32-bit Mode Debug" + "64-bit Mode Debug" + "Memory Mapped" + }; + + if (type > CPER_IA32X64_CTX_MEMMAPPED) + return NULL; + + if (cper_ia32x64_proc_num_ctxs(x86err) == I32X64SEC_VALID_CTXNUM_MAX) { + printk(BIOS_ERR, "Error: New IA32X64 %s context entry would exceed max allowable contexts\n", + ctx_names[type]); + return NULL; + } + + size = cper_ia32x64_ctx_sz_bytype(type, num); + ctx = bert_allocate_storage(size); + if (!ctx) { + printk(BIOS_ERR, "Error: New IA32X64 %s context entry would exceed available region\n", + ctx_names[type]); + return NULL; + } + + revise_error_sizes(status, size); + + ctx->type = type; + ctx->array_size = num; + cper_bump_ia32x64_ctx_count(x86err); + + return ctx; +} + +/* Add a new IA32/X64 Processor Error Information Structure (Table 256), + * following any other errors, to an existing Processor Error Section + * (Table 255). All error structures must be added before any contexts are + * added. + * + * This function fills only the minimal amount of information required to parse + * or step through the errors. The type is filled and PROC_ERR_INFO_NUM is + * updated. + */ +cper_ia32x64_proc_error_info_t *new_cper_ia32x64_check( + acpi_generic_error_status_t *status, + cper_ia32x64_proc_error_section_t *x86err, + enum cper_x86_check_type type) +{ + cper_ia32x64_proc_error_info_t *check; + static const char * const check_names[] = { + "cache", + "TLB", + "bus", + "MS" + }; + const guid_t check_guids[] = { + X86_PROCESSOR_CACHE_CHK_ERROR_GUID, + X86_PROCESSOR_TLB_CHK_ERROR_GUID, + X86_PROCESSOR_BUS_CHK_ERROR_GUID, + X86_PROCESSOR_MS_CHK_ERROR_GUID + }; + + if (type > 3) + return NULL; + + if (cper_ia32x64_proc_num_chks(x86err) == I32X64SEC_VALID_ERRNUM_MAX) { + printk(BIOS_ERR, "Error: New IA32X64 %s check entry would exceed max allowable errors\n", + check_names[type]); + return NULL; + } + + check = bert_allocate_storage(sizeof(*check)); + if (!check) { + printk(BIOS_ERR, "Error: New IA32X64 %s check entry would exceed available region\n", + check_names[type]); + return NULL; + } + + revise_error_sizes(status, sizeof(*check)); + + guidcpy(&check->type, &check_guids[type]); + cper_bump_ia32x64_chk_count(x86err); + + return check; +} + +/* Helper to append an ACPI Generic Error Data Entry plus a CPER IA32/X64 + * Processor Error Section. As many fields are populated as possible for the + * caller. + */ +acpi_hest_generic_data_v300_t *bert_append_ia32x64( + acpi_generic_error_status_t *status) +{ + acpi_hest_generic_data_v300_t *entry; + cper_ia32x64_proc_error_section_t *ipe; + + entry = bert_append_error_datasection(status, + &CPER_SEC_PROC_IA32X64_GUID); + if (!entry) + return NULL; + + status->block_status |= GENERIC_ERR_STS_UNCORRECTABLE_VALID; + status->error_severity = ACPI_GENERROR_SEV_FATAL; + + entry->error_severity = ACPI_GENERROR_SEV_FATAL; + + ipe = section_of_acpientry(ipe, entry); + + ipe->apicid = lapicid(); + ipe->validation |= I32X64SEC_VALID_LAPIC; + + ipe->cpuid[0] = cpuid_eax(1); + ipe->cpuid[1] = cpuid_ebx(1); + ipe->cpuid[2] = cpuid_ecx(1); + ipe->cpuid[3] = cpuid_edx(1); + ipe->validation |= I32X64SEC_VALID_CPUID; + + return entry; +} + +static const char * const generic_error_types[] = { + "PROCESSOR_GENERIC", + "PROCESSOR_SPECIFIC_X86", + "PROCESSOR_SPECIFIC_ARM", + "PLATFORM_MEMORY", + "PLATFORM_MEMORY2", + "PCIE", + "FW_ERROR_RECORD", + "PCI_PCIX_BUS", + "PCI_DEVICE", + "DMAR_GENERIC", + "DIRECTED_IO_DMAR", + "IOMMU_DMAR", + "UNRECOGNIZED" +}; + +static const char *generic_error_name(guid_t *guid) +{ + if (!guidcmp(guid, &CPER_SEC_PROC_GENERIC_GUID)) + return generic_error_types[0]; + if (!guidcmp(guid, &CPER_SEC_PROC_IA32X64_GUID)) + return generic_error_types[1]; + if (!guidcmp(guid, &CPER_SEC_PROC_ARM_GUID)) + return generic_error_types[2]; + if (!guidcmp(guid, &CPER_SEC_PLATFORM_MEM_GUID)) + return generic_error_types[3]; + if (!guidcmp(guid, &CPER_SEC_PLATFORM_MEM2_GUID)) + return generic_error_types[4]; + if (!guidcmp(guid, &CPER_SEC_PCIE_GUID)) + return generic_error_types[5]; + if (!guidcmp(guid, &CPER_SEC_FW_ERR_REC_REF_GUID)) + return generic_error_types[6]; + if (!guidcmp(guid, &CPER_SEC_PCI_X_BUS_GUID)) + return generic_error_types[7]; + if (!guidcmp(guid, &CPER_SEC_PCI_DEV_GUID)) + return generic_error_types[8]; + if (!guidcmp(guid, &CPER_SEC_DMAR_GENERIC_GUID)) + return generic_error_types[9]; + if (!guidcmp(guid, &CPER_SEC_DMAR_VT_GUID)) + return generic_error_types[10]; + if (!guidcmp(guid, &CPER_SEC_DMAR_IOMMU_GUID)) + return generic_error_types[11]; + return generic_error_types[12]; +} + +/* Add a new event to the BERT region. An event consists of an ACPI Error + * Status Block, a Generic Error Data Entry, and an associated CPER Error + * Section. + */ +acpi_generic_error_status_t *bert_new_event(guid_t *guid) +{ + size_t size; + acpi_generic_error_status_t *status; + acpi_hest_generic_data_v300_t *entry, *r; + + size = sizeof(*status); + size += sizeof(*entry); + size += sizeof_error_section(guid); + + if (size > bert_storage_remaining()) { + printk(BIOS_ERR, "Error: Not enough BERT region space to add event for type %s\n", + generic_error_name(guid)); + return NULL; + } + + status = new_bert_status(); + if (!status) + return NULL; + + if (!guidcmp(guid, &CPER_SEC_PROC_GENERIC_GUID)) + r = bert_append_genproc(status); + else if (!guidcmp(guid, &CPER_SEC_PROC_GENERIC_GUID)) + r = bert_append_ia32x64(status); + /* else if other types not implemented */ + else + r = NULL; + + if (r) + return status; + return NULL; +} + +/* Helper to add an MSR context to an existing IA32/X64-type error entry */ +cper_ia32x64_context_t *cper_new_ia32x64_context_msr( + acpi_generic_error_status_t *status, + cper_ia32x64_proc_error_section_t *x86err, u32 addr, int num) +{ + cper_ia32x64_context_t *ctx; + int i; + msr_t *dest; + + ctx = new_cper_ia32x64_ctx(status, x86err, CPER_IA32X64_CTX_MSR, num); + if (!ctx) + return NULL; + + /* already filled ctx->type = CPER_IA32X64_CTX_MSR; */ + ctx->msr_addr = addr; + ctx->array_size = num * sizeof(msr_t); + + dest = (msr_t *)((u8 *)(ctx + 1)); /* point to the Register Array */ + + for (i = 0 ; i < num ; i++) + *(dest + i) = rdmsr(addr + i); + return ctx; +} + +/* The region must be in memory marked as reserved. If not implemented, + * skip generating the information in the region. + */ +__weak void bert_reserved_region(void **start, size_t *size) +{ + *start = NULL; + *size = 0; +} + +static void bert_storage_setup(int unused) +{ + /* Always start with a blank bert region. Make sure nothing is + * maintained across reboots or resumes. + */ + bert_region_broken = 0; + bert_region_used = 0; + + bert_reserved_region(&bert_region_base, &bert_region_size); + + if (!bert_region_base || !bert_region_size) { + printk(BIOS_ERR, "Bug: Can't find/add BERT storage area\n"); + bert_region_broken = 1; + return; + } + + memset(bert_region_base, 0, bert_region_size); +} + +RAMSTAGE_CBMEM_INIT_HOOK(bert_storage_setup) diff --git a/src/arch/x86/include/arch/bert_storage.h b/src/arch/x86/include/arch/bert_storage.h new file mode 100644 index 0000000..9d5b2da --- /dev/null +++ b/src/arch/x86/include/arch/bert_storage.h @@ -0,0 +1,167 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BERT_STORAGE_H_ +#define _BERT_STORAGE_H_ + +#include <stdint.h> +#include <arch/acpi.h> + +/* Items in the BERT region + * + * * Each item begins with a Generic Error Status Block + * * Zero or more Generic Error Data Entries follow, and + * are associated with the Status Block + * * Each Generic Error Data Entry must be a certain type, + * as defined in the UEFI CPER appendix + * * Each type may allow zero or more additional sets of + * data, e.g. error descriptions, or processor contexts. + * + * In the example layout below, there are three BERT region + * entries. The first two are a single error. The third + * has two errors, with one providing a variable amount + * of additional information. + * + * +====================================================================+ + * | Generic Error | Generic Error | Platform Memory Error | + * | Status | Data Entry | | + * |====================================================================| + * | Generic Error | Generic Error | Generic Processor Error | + * | Status | Data Entry | | + * |====================================================================| + * | Generic Error | Generic Error | IA32/X64 Processor Error | + * | Status | Data Entry | +----------------------------+ + * | | | | Error Check Data | + * | | | +----------------------------+ + * | | | | MSR Context | + * | | | +----------------------------+ + * | | | | X64 Registers Context | + * | +-----------------+----+----------------------------+ + * | | Generic Error | PCI Express Error | + * | | Data Entry | | + * +--------------------------------------------------------------------+ + */ + +/* Get implementation-specific reserved area for generating BERT info */ +void bert_reserved_region(void **start, size_t *size); + +/* Get the region where BERT error structures have been constructed for + * generating the ACPI table + */ +void bert_errors_region(void **start, size_t *size); + +/* Get amount of available storage left for error info */ +size_t bert_storage_remaining(void); +/* Find if errors were added, a BERT region is present, and ACPI table needed */ +int bert_errors_present(void); + +/* Get the number of entries accociated with status */ +static inline size_t bert_entry_count(acpi_generic_error_status_t *status) +{ + return (status->block_status & GENERIC_ERR_STS_ENTRY_COUNT_MASK) + >> GENERIC_ERR_STS_ENTRY_COUNT_SHIFT; +} + +/* Increment the number of entries this status describes */ +static inline void bert_bump_entry_count(acpi_generic_error_status_t *status) +{ + int count; + + count = bert_entry_count(status) + 1; + status->block_status &= ~GENERIC_ERR_STS_ENTRY_COUNT_MASK; + status->block_status |= count << GENERIC_ERR_STS_ENTRY_COUNT_SHIFT; +} + +/* Find the nth (1-based) Generic Data Structure attached to an Error Status */ +static inline void *acpi_hest_generic_data_nth( + acpi_generic_error_status_t *status, int num) +{ + acpi_hest_generic_data_v300_t *ptr; + size_t struct_size; + + if (!num || num > bert_entry_count(status)) + return NULL; + + ptr = (acpi_hest_generic_data_v300_t *)(status + 1); + while (--num) { + if (ptr->revision == HEST_GENERIC_ENTRY_V300) + struct_size = sizeof(acpi_hest_generic_data_v300_t); + else + struct_size = sizeof(acpi_hest_generic_data_t); + ptr = (acpi_hest_generic_data_v300_t *)( + (u8 *)ptr + + ptr->data_length + + struct_size); + } + return ptr; +} + +/* Find the address of the first Generic Data structure from its status entry */ +static inline acpi_hest_generic_data_v300_t *acpi_hest_generic_data3( + acpi_generic_error_status_t *status) +{ + return (acpi_hest_generic_data_v300_t *) + ((u8 *)status + sizeof(*status)); +} + +/* Find the address of a Generic Data structure's CPER error record section */ +#define section_of_acpientry(A, B) ((typeof(A))((u8 *)(B) + sizeof(*(B)))) + + +/* Add a context to an existing IA32/X64-type error entry */ +cper_ia32x64_context_t *new_cper_ia32x64_ctx( + acpi_generic_error_status_t *status, + cper_ia32x64_proc_error_section_t *x86err, int type, int num); + +/* Helper to add an MSR context to an existing IA32/X64-type error entry */ +cper_ia32x64_context_t *cper_new_ia32x64_context_msr( + acpi_generic_error_status_t *status, + cper_ia32x64_proc_error_section_t *x86err, u32 addr, int num); + +/* Add check info to an existing IA32/X64-type error entry */ +cper_ia32x64_proc_error_info_t *new_cper_ia32x64_check( + acpi_generic_error_status_t *status, + cper_ia32x64_proc_error_section_t *x86err, + enum cper_x86_check_type type); + +/* Append a new ACPI Generic Error Data Entry plus CPER Error Section to an + * existing ACPI Generic Error Status Block. The caller is responsible for + * the setting the status and entry severity, as well as populating all fields + * of the error section. + */ +acpi_hest_generic_data_v300_t *bert_append_error_datasection( + acpi_generic_error_status_t *status, guid_t *guid); + +/* Helper to append an ACPI Generic Error Data Entry plus a CPER Processor + * Generic Error Section. As many fields are populated as possible for the + * caller. + */ +acpi_hest_generic_data_v300_t *bert_append_genproc( + acpi_generic_error_status_t *status); + +/* Helper to append an ACPI Generic Error Data Entry plus a CPER IA32/X64 + * Processor Error Section. As many fields are populated as possible for the + * caller. + */ +acpi_hest_generic_data_v300_t *bert_append_ia32x64( + acpi_generic_error_status_t *status); + +/* Add a new event to the BERT region. An event consists of an ACPI Error + * Status Block, a Generic Error Data Entry, and an associated CPER Error + * Section. + */ +acpi_generic_error_status_t *bert_new_event(guid_t *guid); + +#endif /* _BERT_STORAGE_H_ */
-
Marshall Dawson (Code Review)