Change in coreboot[master]: mb/google/brya: Update camera NVM parameters

[Tim Wawrzynczak (Code Review)]

Tim Wawrzynczak has submitted this change. ( https://review.coreboot.org/c/coreboot/+/58374 )

Change subject: mb/google/brya: Update camera NVM parameters
......................................................................

mb/google/brya: Update camera NVM parameters

Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.

BUG=b:203014972
Test= Boot board and issue commands:
     `cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
         ./brya_imx208_eeprom.bin`
     `hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
     You should see the result in brya_imx208_eeprom_dump.log to be
     same as module nvm file by vendor provided or meet the Intel nvm
     calibration format.
     (e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)

Signed-off-by: Bernardo Perez Priego 
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) 
Reviewed-by: Tim Wawrzynczak 
---
M src/mainboard/google/brya/variants/brya0/overridetree.cb
1 file changed, 4 insertions(+), 3 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Tim Wawrzynczak: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb
index 6812f20..3822a2c 100644
--- a/src/mainboard/google/brya/variants/brya0/overridetree.cb
+++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb
@@ -522,18 +522,19 @@
    			end
    		end
    		chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""INT3499""
+				register "acpi_hid" = ""ACPI_DT_NAMESPACE_HID""
    			register "acpi_uid" = "1"
    			register "acpi_name" = ""NVM1""
    			register "chip_name" = ""GT24C16S""
    			register "device_type" = "INTEL_ACPI_CAMERA_NVM"

register "pr0" = ""\_SB.PCI0.I2C2.CAM1.PRIC""
+				register "nvm_compat" = ""atmel,24c1024""

-				register "nvm_size" = "0x2800"
+				register "nvm_size" = "0x800"
    			register "nvm_pagesize" = "0x01"
    			register "nvm_readonly" = "0x01"
-				register "nvm_width" = "0x0E"
+				register "nvm_width" = "0x08"

device i2c 50 on
    				probe UFC UFC_MIPI_IMX208