Change in coreboot[master]: mb/google/dedede/var/sasukette: Modify the touch pad slave address

[Tao Xia (Code Review)]

Tao Xia has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/55035 )

Change subject: mb/google/dedede/var/sasukette: Modify the touch pad slave address
......................................................................

mb/google/dedede/var/sasukette: Modify the touch pad slave address

There are two touch pads that Sasukette used have the same slave address.
It will cause one of the touch pad hid identification error.

BUG=b:189520603
BRANCH=dedede
TEST=Verify OK

Signed-off-by: Tao Xia 
Change-Id: I09bc12eeca7f34f6e9424e5cbb7f812f3bbfe0de

Change-Id: If0bd80baa27dfeb7bcb43f0ca4b02e1228e372a6
---
M src/mainboard/google/dedede/variants/sasukette/overridetree.cb
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/35/55035/1

diff --git a/src/mainboard/google/dedede/variants/sasukette/overridetree.cb b/src/mainboard/google/dedede/variants/sasukette/overridetree.cb
index 8d1b95b..904b4d9 100644
--- a/src/mainboard/google/dedede/variants/sasukette/overridetree.cb
+++ b/src/mainboard/google/dedede/variants/sasukette/overridetree.cb
@@ -125,7 +125,7 @@
    			register "generic.wake" = "GPE0_DW0_03"
    			register "generic.probed" = "1"
    			register "hid_desc_reg_offset" = "0x20"
-				device i2c 2c on end
+				device i2c 2a on end
    		end
    	end #I2C 0
    	device pci 19.0 on