[S] Change in coreboot[main]: util/inteltool: Add more Westmere/Ironlake device IDs

[Angel Pons (Code Review)]

Attention is currently required from: Angel Pons, Felix Singer.

Hello Felix Held, Felix Singer, Michael Niewöhner, Paul Menzel, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/60215?usp=email

to look at the new patch set (#3).

Change subject: util/inteltool: Add more Westmere/Ironlake device IDs
......................................................................

util/inteltool: Add more Westmere/Ironlake device IDs

The host bridge PCI device ID can be changed by the firmware. There
is no documentation about it, though. There's 'official' IDs, which
appear in spec updates and Windows drivers, and 'mysterious' IDs,
which Intel doesn't want OSes to know about and thus are not listed.

For the sake of completeness, add the PCI device IDs for Clarkdale.
Though coreboot only supports Arrandale, both of them are Ironlake.

It is possible that the Management Engine handles changing the PCI
device ID, which would not happen when using a broken ME firmware.

Change-Id: I85a48fcf0e0e62f42fe147a5d4e2d557b2143e5b
Signed-off-by: Angel Pons 
---
M util/inteltool/inteltool.c
M util/inteltool/inteltool.h
M util/inteltool/memory.c
M util/inteltool/pcie.c
4 files changed, 17 insertions(+), 5 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/15/60215/3