[XS] Change in coreboot[main]: mb/intel/tglrvp/dt: Remove superfluous USB2_PORT_EMPTY settings

[Felix Singer (Code Review)]

Felix Singer has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/83246?usp=email )

Change subject: mb/intel/tglrvp/dt: Remove superfluous USB2_PORT_EMPTY settings
......................................................................

mb/intel/tglrvp/dt: Remove superfluous USB2_PORT_EMPTY settings

Configuring USB2_PORT_EMPTY is equal to just not setting it. So remove
it to clean up a bit.

Change-Id: I6854f4a0d3e7b51b242549556a5838d4183d3473
Signed-off-by: Felix Singer 
---
M src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb
M src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb
2 files changed, 0 insertions(+), 5 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/46/83246/1

diff --git a/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb b/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb
index ca2e08b..10dcd6c 100644
--- a/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb
+++ b/src/mainboard/intel/tglrvp/variants/tglrvp_up3/devicetree.cb
@@ -201,7 +201,6 @@
    	device ref south_xhci on
    		register "usb2_ports" = "{
    			[0] = USB2_PORT_MID(OC0),	// Type-C Port1
-				[1] = USB2_PORT_EMPTY,		// M.2 WWAN
    			[2] = USB2_PORT_MID(OC3),	// M.2 Bluetooth
    			[3] = USB2_PORT_MID(OC0),	// USB3/2 Type A port1
    			[4] = USB2_PORT_MID(OC0),	// Type-C Port2
diff --git a/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb b/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb
index cfa8874..fafdbf9 100644
--- a/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb
+++ b/src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb
@@ -205,14 +205,10 @@
    	device ref south_xhci on
    		register "usb2_ports" = "{
    			[0] = USB2_PORT_MID(OC3),	// Type-C Port1
-				[1] = USB2_PORT_EMPTY,		// M.2 WWAN
    			[2] = USB2_PORT_MID(OC0),	// M.2 Bluetooth, USB3/2 Type A Port1
    			[3] = USB2_PORT_MID(OC3),	// USB3/2 Type A Port 1
    			[4] = USB2_PORT_MID(OC3),	// Type-C Port2
    			[5] = USB2_PORT_MID(OC3),	// Type-C Port3 / MECC
-				[6] = USB2_PORT_EMPTY,		// Not used
-				[7] = USB2_PORT_EMPTY,		// Not used
-				[8] = USB2_PORT_EMPTY,		// Not used
    			[9] = USB2_PORT_MID(OC3),	// CNVi/BT
    		}"