Rudolf Marek (r.marek@assembler.cz) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4499
-gerrit
commit d01acbc5a9fc2397735e3194044ebf21237bb208 Author: Rudolf Marek r.marek@assembler.cz Date: Tue May 13 16:36:56 2014 +0200
Asus F2A85-M: Move to ther proper SIO
The F2A85-M has IT8603E which is a strip down version of IT8728F. Change configuration from provisional IT8712F to the IT8728F. While at it also enable only needed LPC bridge decodes. As the side effect, this change also implements setup of environmental controller, thus it87 driver can detect the temperatures/fans.
Change-Id: I22067b13ea27ee37e959a246718d9559c2a3215d Signed-off-by: Rudolf Marek r.marek@assembler.cz --- src/mainboard/asus/f2a85-m/Kconfig | 2 +- src/mainboard/asus/f2a85-m/agesawrapper.c | 7 ------- src/mainboard/asus/f2a85-m/buildOpts.c | 1 + src/mainboard/asus/f2a85-m/devicetree.cb | 32 +++++++++++++++++++------------ src/mainboard/asus/f2a85-m/romstage.c | 16 +++++++++++----- 5 files changed, 33 insertions(+), 25 deletions(-)
diff --git a/src/mainboard/asus/f2a85-m/Kconfig b/src/mainboard/asus/f2a85-m/Kconfig index c923b5b..6dea246 100644 --- a/src/mainboard/asus/f2a85-m/Kconfig +++ b/src/mainboard/asus/f2a85-m/Kconfig @@ -30,7 +30,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy select HAVE_MP_TABLE select HAVE_ACPI_RESUME select HAVE_ACPI_TABLES - select SUPERIO_ITE_IT8712F + select SUPERIO_ITE_IT8728F select BOARD_ROMSIZE_KB_8192 select GFXUMA
diff --git a/src/mainboard/asus/f2a85-m/agesawrapper.c b/src/mainboard/asus/f2a85-m/agesawrapper.c index fdf7457..7a25719 100644 --- a/src/mainboard/asus/f2a85-m/agesawrapper.c +++ b/src/mainboard/asus/f2a85-m/agesawrapper.c @@ -132,8 +132,6 @@ agesawrapper_amdinitmmio ( { AGESA_STATUS Status; UINT64 MsrReg; - UINT32 PciData; - PCI_ADDR PciAddress; AMD_CONFIG_PARAMS StdHeader;
/* @@ -150,11 +148,6 @@ agesawrapper_amdinitmmio ( MsrReg = MsrReg | 0x0000400000000000; LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
- /* For serial port */ - PciData = 0xFF03FFD5; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); - LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - /* Set ROM cache onto WP to decrease post time */ MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); diff --git a/src/mainboard/asus/f2a85-m/buildOpts.c b/src/mainboard/asus/f2a85-m/buildOpts.c index cbd1071..0c6b657 100644 --- a/src/mainboard/asus/f2a85-m/buildOpts.c +++ b/src/mainboard/asus/f2a85-m/buildOpts.c @@ -306,6 +306,7 @@ CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] =
#define DFLT_SMBUS0_BASE_ADDRESS 0xB00 #define DFLT_SMBUS1_BASE_ADDRESS 0xB20 +/* The AGESA likes to enable 512 bytes region on this base for LPC bus */ #define DFLT_SIO_PME_BASE_ADDRESS 0xE00 #define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 #define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 diff --git a/src/mainboard/asus/f2a85-m/devicetree.cb b/src/mainboard/asus/f2a85-m/devicetree.cb index 0014381..25fe5db 100644 --- a/src/mainboard/asus/f2a85-m/devicetree.cb +++ b/src/mainboard/asus/f2a85-m/devicetree.cb @@ -60,7 +60,14 @@ chip northbridge/amd/agesa/family15tn/root_complex device pci 14.1 off end # IDE 0x439c device pci 14.2 on end # HDA 0x4383 device pci 14.3 on # LPC 0x439d - chip superio/ite/it8712f + chip superio/ite/it8728f + register hwm_ctl_register = "0xc0" + register hwm_main_ctl_register = "0x33" + register hwm_adc_temp_chan_en_reg = "0x38" + register hwm_fan1_ctl_pwm = "0x00" + register hwm_fan2_ctl_pwm = "0x80" + register hwm_fan3_ctl_pwm = "0x00" + device pnp 2e.0 off # Floppy io 0x60 = 0x3f0 irq 0x70 = 6 @@ -78,7 +85,11 @@ chip northbridge/amd/agesa/family15tn/root_complex io 0x60 = 0x378 irq 0x70 = 7 end - device pnp 2e.4 off end # EC + device pnp 2e.4 on # Env Controller + io 0x60 = 0x290 + io 0x62 = 0x220 + irq 0x70 = 0 + end device pnp 2e.5 on # Keyboard io 0x60 = 0x60 io 0x62 = 0x64 @@ -87,19 +98,16 @@ chip northbridge/amd/agesa/family15tn/root_complex device pnp 2e.6 off # Mouse irq 0x70 = 12 end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 + device pnp 2e.7 on # GPIO + io 0x60 = 0x228 #SMI + io 0x62 = 0x300 #Simple I/O + io 0x64 = 0x238 #Phony resource IT8603E does not have it + irq 0x70 = 0 end device pnp 2e.a off end # CIR - end #superio/ite/it8712f + end #superio/ite/it8728f end #device pci 14.3 # LPC - device pci 14.4 on end # PCI 0x4384 # PCI-b conflict with GPIO. + device pci 14.4 on end # PCI 0x4384 device pci 14.5 on end # USB 2 device pci 14.6 off end # Gec # SD, make it on so the BAR is assigned (if proper hudson on/off handling is implemented this may go away) diff --git a/src/mainboard/asus/f2a85-m/romstage.c b/src/mainboard/asus/f2a85-m/romstage.c index ffd91bf..3884e36 100644 --- a/src/mainboard/asus/f2a85-m/romstage.c +++ b/src/mainboard/asus/f2a85-m/romstage.c @@ -37,14 +37,15 @@ #include <stdint.h> #include <string.h> #include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> +#include <superio/ite/it8728f/it8728f.h>
#define MMIO_NON_POSTED_START 0xfed00000 #define MMIO_NON_POSTED_END 0xfedfffff #define SB_MMIO 0xFED80000 #define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x))
-#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) +#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1) +#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO)
static void sbxxx_enable_48mhzout(void) { @@ -80,12 +81,17 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
if (!cpu_init_detectedx && boot_cpu()) {
- /* enable SIO decode */ + /* enable SIO LPC decode */ dev = PCI_DEV(0, 0x14, 3); byte = pci_read_config8(dev, 0x48); byte |= 3; /* 2e, 2f */ pci_write_config8(dev, 0x48, byte);
+ /* enable serial decode */ + byte = pci_read_config8(dev, 0x44); + byte |= (1 << 6); /* 0x3f8 */ + pci_write_config8(dev, 0x44, byte); + post_code(0x30);
/* enable SB MMIO space */ @@ -94,9 +100,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* enable SIO clock */ sbxxx_enable_48mhzout(); - it8712f_kill_watchdog(); + ite_kill_watchdog(GPIO_DEV); ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - it8712f_enable_3vsbsw(); + ite_enable_3vsbsw(GPIO_DEV); console_init();
/* turn on secondary smbus at b20 */
-
Rudolf Marek