Change in coreboot[master]: siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devices

[Werner Zeh (Code Review)]

Werner Zeh has submitted this change and it was merged. ( https://review.coreboot.org/29513 )

Change subject: siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devices
......................................................................

siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devices

On this mainboard there is a legacy PCI device, which is connected to
the PCIe root port via a PCIe-2-PCI bridge. This device only supports
legacy interrupt routing. For this reason we have to adjust the PIR6
register (0x314c) which is responsible for PCIe device 13h and 14h. This
means that the interrupt routing will also be the same for both PCIe
devices. The bridge is connected to PCIe root port 2 and 3 over two
lanes (Device 13.0 and 13.1).

The following routing is required:
INTA#->PIRQD#, INTB#->PIRQA#, INTC#->PIRQB#, INTD#->PIRQC#

Change-Id: I5028c26769a2122b1c609ad7789c9949e3cb7a87
Signed-off-by: Mario Scheithauer 
Reviewed-on: https://review.coreboot.org/29513
Reviewed-by: Werner Zeh 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
1 file changed, 3 insertions(+), 4 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Werner Zeh: Looks good to me, approved

diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
index ccf3ab8..ade923a 100644
--- a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
@@ -32,11 +32,10 @@
 {
    struct device *dev = NULL;

-	/*
-	 * PIR6 register mapping for PCIe root ports
-	 * INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
+	/* PIR6 register mapping for PCIe root ports
+	 * INTA#->PIRQD#, INTB#->PIRQA#, INTC#->PIRQB#, INTD#-> PIRQC#
     */
-	pcr_write16(PID_ITSS, 0x314c, 0x0321);
+	pcr_write16(PID_ITSS, 0x314c, 0x2103);

/* Disable clock outputs 1-5 (CLKOUT) for XIO2001 PCIe to PCI Bridge. */
    dev = dev_find_device(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2001, 0);