Change in coreboot[master]: mb/google/brya: Swap P-sensor IRQ

[Tim Wawrzynczak (Code Review)]

Tim Wawrzynczak has submitted this change. ( https://review.coreboot.org/c/coreboot/+/55977 )

Change subject: mb/google/brya: Swap P-sensor IRQ
......................................................................

mb/google/brya: Swap P-sensor IRQ

P-sensor is swap by the latest schematic. Thus, swap the IRQ for correct
P-sensor.

BUG=b:192331122,b:181555900
TEST=check P-sensor driver can be probed without error.

Signed-off-by: Eric Lai 
Change-Id: I3ccb31c1925e476e2ebb34b2439a491759472405
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55977
Tested-by: build bot (Jenkins) 
Reviewed-by: Tim Wawrzynczak 
---
M src/mainboard/google/brya/variants/brya0/overridetree.cb
1 file changed, 2 insertions(+), 2 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Tim Wawrzynczak: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb
index 5bb93e5..9ef7478 100644
--- a/src/mainboard/google/brya/variants/brya0/overridetree.cb
+++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb
@@ -326,7 +326,7 @@
    	device ref i2c2 on
    		chip drivers/i2c/sx9324
    			register "desc" = ""SAR1 Proximity Sensor""
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
    			register "speed" = "I2C_SPEED_FAST"
    			register "uid" = "1"
    			register "reg_gnrl_ctrl0" = "0x16"
@@ -374,7 +374,7 @@
    		end
    		chip drivers/i2c/sx9324
    			register "desc" = ""SAR2 Proximity Sensor""
-				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_B3_IRQ)"
+				register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
    			register "speed" = "I2C_SPEED_FAST"
    			register "uid" = "2"
    			register "reg_gnrl_ctrl0" = "0x16"