Leroy P Leahy (leroy.p.leahy@intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13443
-gerrit
commit b1a60c0c73ed69a913801eae5d8e6e556f574e1d Author: Lee Leahy leroy.p.leahy@intel.com Date: Tue Jan 26 15:53:35 2016 -0800
soc/intel/quark: Add TempRamInit support
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Move the FSP binary into ESRAM * Test by setting the following Kconfig values one at a time: * CONFIG_ENABLE_DEBUG_LED_FINDFSP * CONFIG_ENABLE_DEBUG_LED_TEMPRAMINIT
Testing: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select CONFIG_ENABLE_DEBUG_LED_FINDFSP" * Add "select HAVE_FSP_BIN" * Add "select HAVE_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located
TEST=Build and run on Galileo Gen2
Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy leroy.p.leahy@intel.com --- src/soc/intel/quark/Kconfig | 33 ++++++ src/soc/intel/quark/memmap.c | 7 ++ src/soc/intel/quark/romstage/Makefile.inc | 1 + src/soc/intel/quark/romstage/cache_as_ram.inc | 165 ++++++++++++++++++++++++++ src/soc/intel/quark/romstage/esram_init.inc | 20 +++- 5 files changed, 224 insertions(+), 2 deletions(-)
diff --git a/src/soc/intel/quark/Kconfig b/src/soc/intel/quark/Kconfig index 2509e06..fae29cc 100644 --- a/src/soc/intel/quark/Kconfig +++ b/src/soc/intel/quark/Kconfig @@ -38,6 +38,39 @@ config CBFS_SIZE This option specifies the maximum size of the CBFS portion in the firmware image.
+config ENABLE_DEBUG_LED + bool + default n + help + Enable the use of the SD LED for early debugging before serial output is + available. Setting this LED indicates that control has reached the desired + check point. The assembly code below may be inserted into cache_as_ram.inc: + movl $SD_HOST_CTRL, %ebx + movb 0(%ebx), %al + orb $1, %al + movb %al, 0(%ebx) + +config ENABLE_DEBUG_LED_ESRAM + bool "SD LED indicates ESRAM initialized" + default n + select ENABLE_DEBUG_LED + help + Indicate that ESRAM has been successfully initialized. + +config ENABLE_DEBUG_LED_FINDFSP + bool "SD LED indicates fsp.bin file was found" + default n + select ENABLE_DEBUG_LED + help + Indicate that fsp.bin was found. + +config ENABLE_DEBUG_LED_TEMPRAMINIT + bool "SD LED indicates TempRamInit was successful" + default n + select ENABLE_DEBUG_LED + help + Indicate that TempRamInit was successful. + config HAVE_RMU_FILE bool default n diff --git a/src/soc/intel/quark/memmap.c b/src/soc/intel/quark/memmap.c index 8ac88bc..a4340f0 100644 --- a/src/soc/intel/quark/memmap.c +++ b/src/soc/intel/quark/memmap.c @@ -15,6 +15,13 @@ */
#include <cbmem.h> +#include <fsp/memmap.h> + +size_t mmap_region_granularity(void) +{ + /* Align to 8 MiB by default */ + return 8 << 20; +}
void *cbmem_top(void) { diff --git a/src/soc/intel/quark/romstage/Makefile.inc b/src/soc/intel/quark/romstage/Makefile.inc index a0be5d5..cb17d3d 100644 --- a/src/soc/intel/quark/romstage/Makefile.inc +++ b/src/soc/intel/quark/romstage/Makefile.inc @@ -14,3 +14,4 @@ #
cpu_incs-y += $(src)/soc/intel/quark/romstage/esram_init.inc +cpu_incs-y += $(src)/soc/intel/quark/romstage/cache_as_ram.inc diff --git a/src/soc/intel/quark/romstage/cache_as_ram.inc b/src/soc/intel/quark/romstage/cache_as_ram.inc new file mode 100644 index 0000000..80ac64d --- /dev/null +++ b/src/soc/intel/quark/romstage/cache_as_ram.inc @@ -0,0 +1,165 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2000,2007 Ronald G. Minnich rminnich@gmail.com + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. + * Copyright (C) 2015-2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Replacement for cache_as_ram.inc when using the FSP binary. This code + * locates the FSP binary, initializes the cache as RAM and performs the + * first stage of initialization. Next this code switches the stack from + * the cache to RAM and then disables the cache as RAM. Finally this code + * performs the final stage of initialization. + */ + +#include <rules.h> + + /* + * eax: BIST value + */ + + mov %eax, %edi + +cache_as_ram: + post_code(0x20) + + /* + * edi: BIST value + */ + + /* + * Find the FSP binary in cbfs. + * Make a fake stack that has the return value back to this code. + */ + lea fake_fsp_stack, %esp + jmp find_fsp + +find_fsp_ret: + /* Save the FSP location */ + mov %eax, %ebp + + /* + * Only when a valid FSP binary is found at CONFIG_FSP_LOC is + * the returned FSP_INFO_HEADER structure address above the base + * address of FSP binary specified by the CONFIG_FSP_LOC value. + * All of the error values are in the 0x8xxxxxxx range which are + * below the CONFIG_FSP_LOC value. + */ + cmp $CONFIG_FSP_SRAM_LOC, %eax + jbe halt1 + + post_code(POST_FSP_TEMP_RAM_INIT) + +#if IS_ENABLED(CONFIG_ENABLE_DEBUG_LED_FINDFSP) + movl $SD_HOST_CTRL, %ebx + movb 0(%ebx), %al + orb $1, %al + movb %al, 0(%ebx) +#endif /* CONFIG_ENABLE_DEBUG_LED_FINDFSP */ + + /* Calculate entry into FSP */ + mov 0x30(%ebp), %eax /* Load TempRamInitEntry */ + add 0x1c(%ebp), %eax /* add in the offset for FSP */ + + /* + * Pass early init variables on a fake stack (no memory yet) + * as well as the return location + */ + lea CAR_init_stack, %esp + + /* + * BIST value is zero + * eax: TempRamInitApi address + * ebp: FSP_INFO_HEADER address + * edi: BIST value + * esi: Not used + */ + + /* call FSP binary to setup temporary stack */ + jmp *%eax + +CAR_init_done: + addl $4, %esp + + /* + * ebp: FSP_INFO_HEADER address + * ecx: Temp RAM base + * edx: Temp RAM top + * edi: BIST value + */ + + cmp $0, %eax + jne halt2 + +#if IS_ENABLED(CONFIG_ENABLE_DEBUG_LED_TEMPRAMINIT) + movl %edx, %esi + movl $SD_HOST_CTRL, %ebx + movb 0(%ebx), %al + orb $1, %al + movb %al, 0(%ebx) + movl %esi, %edx +#endif /* CONFIG_ENABLE_DEBUG_LED_TEMPRAMINIT */ + + clrl %eax + jmp halt2 + +halt1: + /* + * Failures for postcode 0xBA - failed in fsp_fih_early_find() + * + * Values are: + * 0x01 - FV signature, "_FVH" not present + * 0x02 - FFS GUID not present + * 0x03 - FSP INFO Header not found + * 0x04 - ImageBase does not equal CONFIG_FSP_LOC - Is the FSP rebased to + * a different location, or does it need to be? + * 0x05 - FSP INFO Header signature "FSPH" not found + * 0x06 - FSP Image ID is not the expected ID. + */ + movb $0xBA, %ah + jmp .Lhlt + +halt2: + /* + * Failures for postcode 0xBB - failed in the FSP: + * + * 0x00 - FSP_SUCCESS: Temp RAM was initialized successfully. + * 0x02 - FSP_INVALID_PARAMETER: Input parameters are invalid. + * 0x03 - FSP_UNSUPPORTED: The FSP calling conditions were not met. + * 0x07 - FSP_DEVICE_ERROR: Temp RAM initialization failed + * 0x0E - FSP_NOT_FOUND: No valid microcode was found in the microcode region. + * 0x14 - FSP_ALREADY_STARTED: Temp RAM initialization has been invoked + */ + movb $0xBB, %ah + jmp .Lhlt + +/* + * esp is set to this location so that the call into and return from the FSP + * in find_fsp will work. + */ + .align 4 +fake_fsp_stack: + .long find_fsp_ret + .long CONFIG_FSP_SRAM_LOC /* FSP base address */ + +CAR_init_params: + .long CONFIG_CPU_MICROCODE_CBFS_LOC /* Microcode Location */ + .long CONFIG_CPU_MICROCODE_CBFS_LEN /* Microcode Length */ + .long 0xFFFFFFFF - CONFIG_ROM_SIZE + 1 /* Firmware Location */ + .long CONFIG_ROM_SIZE /* Total Firmware Length */ + +CAR_init_stack: + .long CAR_init_done + .long CAR_init_params diff --git a/src/soc/intel/quark/romstage/esram_init.inc b/src/soc/intel/quark/romstage/esram_init.inc index 164a7a5..8455abd 100644 --- a/src/soc/intel/quark/romstage/esram_init.inc +++ b/src/soc/intel/quark/romstage/esram_init.inc @@ -514,6 +514,20 @@ stackless_PCIConfig_Read: #----------------------------------------------------------------------------
esram_init_done: + # + # Copy FSP image to SRAM and call it. + # + #TODO - FSP location/size could be got in a routine. + cld + movl $(0x00040000), %ecx # 256K DWORDs = 64K + shrl $2, %ecx + movl $CONFIG_FSP_LOC, %esi # The source address. + movl $CONFIG_FSP_SRAM_LOC, %edi # The destination address in QUARK_ESRAM_MEM_BASE_ADDRESS. + rep movsl + +#if IS_ENABLED(CONFIG_ENABLE_DEBUG_LED) +sd_led: + movl %eax, %ecx
.equ SD_PFA, (0x14 << 11) # B0:D20:F0 - SDIO controller .equ SD_CFG_BASE, (PCI_CFG | SD_PFA) # SD controller base in PCI config space @@ -555,10 +569,12 @@ L43: jmp stackless_PCIConfig_Read
L44: +#if IS_ENABLED(CONFIG_ENABLE_DEBUG_LED_ESRAM) movl $SD_HOST_CTRL, %ebx movb 0(%ebx), %al orb $1, %al movb %al, 0(%ebx) +#endif /* CONFIG_ENABLE_DEBUG_LED_ESRAM */
- movl $0, %eax - jmp .Lhlt + movl %ecx, %eax +#endif /* CONFIG_ENABLE_DEBUG_LED */
-
Leroy P Leahy