Change in coreboot[master]: mb/via/epia-m850: Drop support - coreboot-gerrit

19 Nov 2019

Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36949 )
Change subject: mb/via/epia-m850: Drop support
......................................................................
mb/via/epia-m850: Drop support
Change-Id: Id6aa669542bcfd774fa5571d790f59f156a39a4b
Signed-off-by: Arthur Heymans arthur@aheymans.xyz
---
D src/mainboard/via/Kconfig
D src/mainboard/via/Kconfig.name
D src/mainboard/via/epia-m850/Kconfig
D src/mainboard/via/epia-m850/Kconfig.name
D src/mainboard/via/epia-m850/board_info.txt
D src/mainboard/via/epia-m850/devicetree.cb
D src/mainboard/via/epia-m850/irq_tables.c
D src/mainboard/via/epia-m850/mainboard.c
D src/mainboard/via/epia-m850/romstage.c
9 files changed, 0 insertions(+), 456 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/36949/1

diff --git a/src/mainboard/via/Kconfig b/src/mainboard/via/Kconfig
deleted file mode 100644
index d14c758..0000000
--- a/src/mainboard/via/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if VENDOR_VIA
-
-choice
-	prompt "Mainboard model"
-
-source "src/mainboard/via/*/Kconfig.name"
-
-endchoice
-
-source "src/mainboard/via/*/Kconfig"
-
-config MAINBOARD_VENDOR
-	string
-	default "VIA"
-
-endif # VENDOR_VIA
diff --git a/src/mainboard/via/Kconfig.name b/src/mainboard/via/Kconfig.name
deleted file mode 100644
index 9015389..0000000
--- a/src/mainboard/via/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config VENDOR_VIA
-	bool "VIA"
diff --git a/src/mainboard/via/epia-m850/Kconfig b/src/mainboard/via/epia-m850/Kconfig
deleted file mode 100644
index f6c0621..0000000
--- a/src/mainboard/via/epia-m850/Kconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2011-2012  Alexandru Gagniuc mr.nuke.me@gmail.com
-##
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-
-if BOARD_VIA_EPIA_M850
-
-config BOARD_SPECIFIC_OPTIONS
-	def_bool y
-	select CPU_VIA_NANO
-	select NORTHBRIDGE_VIA_VX900
-	select SUPERIO_FINTEK_F81865F
-	select HAVE_PIRQ_TABLE
-	select PIRQ_ROUTE
-	select HAVE_MP_TABLE
-	#select HAVE_OPTION_TABLE
-	#select HAVE_ACPI_TABLES
-	#select HAVE_ACPI_RESUME
-	#select BOARD_HAS_FADT
-	select BOARD_ROMSIZE_KB_512
-
-config MAINBOARD_DIR
-	string
-	default via/epia-m850
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "EPIA-M850"
-
-config IRQ_SLOT_COUNT
-	int
-	default 13
-
-endif # BOARD_VIA_EPIA_M850
diff --git a/src/mainboard/via/epia-m850/Kconfig.name b/src/mainboard/via/epia-m850/Kconfig.name
deleted file mode 100644
index 5d6ed61..0000000
--- a/src/mainboard/via/epia-m850/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_VIA_EPIA_M850
-	bool "EPIA-M850"
diff --git a/src/mainboard/via/epia-m850/board_info.txt b/src/mainboard/via/epia-m850/board_info.txt
deleted file mode 100644
index ba9ecf1..0000000
--- a/src/mainboard/via/epia-m850/board_info.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Category: mini
-Board URL: http://www.viaembedded.com/en/products/boards/1290/1/EPIA-M850.html
-ROM package: SOIC8
-ROM protocol: SPI
-ROM socketed: n
-Flashrom support: y
-Release year: 2010
diff --git a/src/mainboard/via/epia-m850/devicetree.cb b/src/mainboard/via/epia-m850/devicetree.cb
deleted file mode 100644
index 4dc7c27..0000000
--- a/src/mainboard/via/epia-m850/devicetree.cb
+++ /dev/null
@@ -1,108 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2011-2013  Alexandru Gagniuc mr.nuke.me@gmail.com
-##
-## This program is free software: you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation, either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-
-chip northbridge/via/vx900		# Northbridge
-	register "assign_pex_to_dp" = "0"
-	register "pcie_port1_2_lane_wide" = "1"
-	register "ext_int_route_to_pirq" = "'H'"
-
-	device cpu_cluster 0 on		# APIC cluster
-		chip cpu/via/nano		# VIA NANO
-			device lapic 0 on end	# APIC
-		end
-	end
-	device domain 0 on
-		device pci 0.0  on end		# [0410] Host controller
-		device pci 0.1  on end		# [1410] Error Reporting
-		device pci 0.2  on end		# [2410] CPU Bus Control
-		device pci 0.3  on end		# [3410] DRAM Bus Control
-		device pci 0.4  on end		# [4410] Power Management
-		device pci 0.5  on		# [5410] APIC+Traffic Control
-			chip drivers/generic/ioapic
-				register "have_isa_interrupts" = "0"
-				register "irq_on_fsb" = "1"
-				register "enable_virtual_wire" = "1"
-				register "base" = "(void *)0xfecc0000"
-				device ioapic 2 on end
-			end
-		end
-		device pci 0.6  off end		# [6410] Scratch Registers
-		device pci 0.7  on end		# [7410] V4 Link Control
-		device pci 1.0  on		# [7122] VGA Chrome9 HD
-			ioapic_irq 2 INTA 0x28
-		end
-		device pci 1.1  on		# [9170] Audio Device
-			ioapic_irq 2 INTA 0x29
-		end
-		device pci 3.0  on end		# [a410] PEX1
-		device pci 3.1  on end		# [b410] PEX2
-		device pci 3.2  on end		# [c410] PEX3
-		device pci 3.3  on end		# [d410] PEX4
-		device pci 3.4  on end		# [e410] PCIE bridge
-		device pci b.0  on end		# [a409] USB Device
-		device pci c.0  off end		# [95d0] SDIO Host Controller
-		device pci d.0  off end		# [9530] Memory Card controller
-		device pci f.0  on		# [9001] SATA Controller
-			ioapic_irq 1 INTA 0x15
-		end
-		device pci 10.0 on end		# [3038] USB 1.1
-		device pci 10.1 on end		# [3038] USB 1.1
-		device pci 10.2 on end		# [3038] USB 1.1
-		device pci 10.3 on end		# [3038] USB 1.1
-		device pci 10.4 on end		# [3104] USB 2.0
-		device pci 11.0 on		# [8410] LPC Bus Control
-			chip drivers/generic/ioapic
-				register "have_isa_interrupts" = "1"
-				register "irq_on_fsb" = "1"
-				register "enable_virtual_wire" = "1"
-				register "base" = "(void *)0xfec00000"
-				device ioapic 1 on end
-			end
-			#chip drivers/generic/generic	# DIMM 0 channel 1
-			#	device i2c 50 on end
-			#end
-			#chip drivers/generic/generic	# DIMM 1 channel 1
-			#	device i2c 51 on end
-			#end
-			chip superio/fintek/f81865f	# Super duper IO
-				device pnp 4e.0 off end	# Floppy
-				device pnp 4e.3 off end	# Parallel Port
-				device pnp 4e.4 off end	# Hardware Monitor
-				device pnp 4e.5 off end	# Keyboard not here
-				device pnp 4e.6 off end	# GPIO
-				device pnp 4e.a off end	# PME
-				device pnp 4e.10 on	# COM1
-					io 0x60 = 0x3f8
-					irq 0x70 = 4
-				end
-				device pnp 4e.11 on	# COM2
-					io 0x60 = 0x2f8
-					irq 0x70 = 3
-				end
-				device pnp 4e.12 on	# COM3
-					io 0x60 = 0x3e8
-					irq 0x70 = 10
-				end
-				device pnp 4e.13 on	# COM4
-					io 0x60 = 0x2e8
-					irq 0x70 = 11
-				end
-			end # superio/fintek/f81865f
-		end # LPC
-		device pci 11.7 on end		# [a353] North-South control
-		device pci 14.0 on end		# [3288] Azalia HDAC
-	end
-end
diff --git a/src/mainboard/via/epia-m850/irq_tables.c b/src/mainboard/via/epia-m850/irq_tables.c
deleted file mode 100644
index 7aefc57..0000000
--- a/src/mainboard/via/epia-m850/irq_tables.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2012 Alexandru Gagniuc mr.nuke.me@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <arch/pirq_routing.h>
-#include <device/pci_ids.h>
-#include <string.h> /* <- For memset */
-
-#define _OFF 0x00
-#define ___OFF 0x0000
-#define LNKA 1
-#define LNKB 2
-#define LNKC 3
-#define LNKD 4
-#define LNKE 5
-#define LNKF 6
-#define LNKG 7
-#define LNKH 8
-#define BITMAP 0xdce0
-/* The link that carries the SATA interrupt has its own mask, just in case
- * we want to make sure our SATA controller gets mapped to IRQ 14 */
-#define B_SATA BITMAP
-
-const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,			/* u32 signature */
-	PIRQ_VERSION,			/* u16 version */
-	32 + 16 * 13,			/* Max. number of devices on the bus */
-	0x00,				/* Interrupt router bus */
-	(0x11 << 3) | 0x0,		/* Interrupt router dev */
-	0,				/* IRQs devoted exclusively for PCI */
-	PCI_VENDOR_ID_VIA,		/* Vendor */
-	PCI_DEVICE_ID_VIA_VX900_LPC,	/* Device */
-	0,				/* Miniport */
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
-	0x19,			/* Checksum (has to be set to some value that
-				 * would give 0 after the sum of all bytes
-				 * for this structure (including checksum). */
-	{
-		/* bus,        dev | fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
-		{0x00, (0x01 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
-		{0x00, (0x03 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0},
-		{0x00, (0x0a << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0},
-		{0x00, (0x0b << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
-		{0x00, (0x0c << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
-		{0x00, (0x0d << 3) | 0x0, {{LNKA, BITMAP}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
-		{0x00, (0x0f << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
-		{0x00, (0x10 << 3) | 0x0, {{LNKA, BITMAP}, {LNKB, B_SATA}, {LNKC, BITMAP}, {LNKD, BITMAP}}, 0x0, 0x0},
-		{0x00, (0x14 << 3) | 0x0, {{LNKB, B_SATA}, {_OFF, ___OFF}, {_OFF, ___OFF}, {_OFF, ___OFF}}, 0x0, 0x0},
-		{0x01, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x1, 0x0},
-		{0x02, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x2, 0x0},
-		{0x03, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0},
-		{0x04, (0x00 << 3) | 0x0, {{LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}, {LNKH, BITMAP}}, 0x0, 0x0},
-	}
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-	return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/via/epia-m850/mainboard.c b/src/mainboard/via/epia-m850/mainboard.c
deleted file mode 100644
index 03699db..0000000
--- a/src/mainboard/via/epia-m850/mainboard.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011  Alexandru Gagniuc mr.nuke.me@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <device/device.h>
-#include <device/pci_def.h>
-#include <console/console.h>
-
-#if CONFIG(VGA_ROM_RUN)
-
-#include <arch/interrupt.h>
-#include <x86emu/x86emu.h>
-
-#include <northbridge/via/vx900/vx900.h>
-
-static int vx900_int15_handler(void)
-{
-	int res;
-
-	printk(BIOS_DEBUG, "%s %0x\n", __func__, X86_AX & 0xffff);
-	/* Set AX return value here so we don't set it every time. Just set it
-	 * to something else if the callback is unsupported */
-	res = -1;
-	switch (X86_AX & 0xffff) {
-#if 0
-	case 0x5f01:
-		/* VGA POST - panel type */
-		/* FIXME: Don't hardcode panel type */
-		/* Panel Type Number */
-		X86_CX = 0;
-		res = 0;
-		break;
-	case 0x5f02:
-		{
-			/* Boot device selection */
-			X86_BL = INT15_5F02_BL_HWOPT_CRTCONN;
-			/* FIXME: or 0 ? */
-			X86_BH = 0;	// INT15_5F02_BH_TV_CONN_DEFAULT;
-			X86_EBX = 0;	//  INT15_5F02_EBX_HDTV_RGB;
-			X86_ECX = INT15_5F02_ECX_DISPLAY_CRT;
-			//X86_ECX |= INT15_5F02_ECX_TV_MODE_RGB;
-			//X86_ECX |= INT15_5F02_ECX_HDTV_1080P;
-			X86_DL = INT15_5F02_DL_TV_LAYOUT_DEFAULT;
-			res = 0;
-			break;
-		}
-#endif
-	case 0x5f18:
-		X86_BL = vx900_int15_get_5f18_bl();
-		res = 0;
-		break;
-#if 0
-	case 0x5f2a:
-		/* Get SSC Control Settings */
-		/* FIXME: No idea what this does. Just disable this feature
-		 * for now */
-		X86_CX = INT15_5F2A_CX_SSC_ENABLE;
-		res = 0;
-		break;
-	case 0x5f2b:
-		/* Engine clock setting */
-		/* FIXME: ECLK fixed 250MHz ? */
-		X86_EBX = INT15_5F2B_EBX_ECLK_250MHZ;
-		break;
-#endif
-	default:
-		printk(BIOS_DEBUG, "Unsupported INT15 call %04x!\n",
-		       X86_AX & 0xffff);
-		X86_AX = 0;
-		res = -1;
-		break;
-	}
-
-	if (res == 0)
-		X86_AX = 0x5f;
-	else
-		X86_AX = 0;
-	return X86_AX;
-}
-#endif
-
-static void mainboard_enable(struct device *dev)
-{
-	(void)dev;
-
-#if CONFIG(VGA_ROM_RUN)
-	printk(BIOS_DEBUG, "Installing INT15 handler...\n");
-	mainboard_interrupt_handlers(0x15, &vx900_int15_handler);
-#endif
-}
-
-struct chip_operations mainboard_ops = {
-	CHIP_NAME("VIA EPIA-M850 Mainboard")
-	    .enable_dev = mainboard_enable,
-};
diff --git a/src/mainboard/via/epia-m850/romstage.c b/src/mainboard/via/epia-m850/romstage.c
deleted file mode 100644
index 80693cd..0000000
--- a/src/mainboard/via/epia-m850/romstage.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2011-2012  Alexandru Gagniuc mr.nuke.me@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Inspired from the EPIA-M700
- */
-#include <stdint.h>
-#include <console/console.h>
-#include <device/pci_ops.h>
-#include <device/pci_def.h>
-#include <lib.h>
-#include <cpu/x86/bist.h>
-#include <timestamp.h>
-#include <cbmem.h>
-
-#include <northbridge/via/vx900/early_vx900.h>
-#include <northbridge/via/vx900/raminit.h>
-#include <superio/fintek/common/fintek.h>
-#include <superio/fintek/f81865f/f81865f.h>
-
-#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1)
-
-/* cache_as_ram.inc jumps to here. */
-void main(unsigned long bist)
-{
-	u32 tolm;
-
-	timestamp_init(timestamp_get());
-	timestamp_add_now(TS_START_ROMSTAGE);
-
-	/* First thing we need to do on the VX900, before anything else */
-	vx900_enable_pci_config_space();
-
-	/* Serial console is easy to take care of */
-	fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-	console_init();
-	printk(BIOS_DEBUG, "Console initialized.\n");
-
-	vx900_cpu_bus_interface_setup();
-
-	/* Be smart. Get this info */
-	vx900_print_strapping_info();
-	/* DEVEL helper */
-	vx900_disable_auto_reboot();
-	/* Halt if there was a built-in self test failure. */
-	report_bist_failure(bist);
-
-	/* Oh, almighty, give us the SMBUS */
-	enable_smbus();
-
-	timestamp_add_now(TS_BEFORE_INITRAM);
-	/* Now we can worry about raminit.
-	 * This board only has DDR3, so no need to worry about which DRAM type
-	 * to use */
-	dimm_layout dimms = { {0x50, 0x51, SPD_END_LIST} };
-	vx900_init_dram_ddr3(&dimms);
-	timestamp_add_now(TS_AFTER_INITRAM);
-
-	/* TODO: All these ram_checks are here to ensure we test most of the RAM
-	 * below 4G. They should not be needed once VX900 raminit is stable */
-	ram_check(0, 0x80);
-	ram_check(512 << 10, 0x80);
-	ram_check((1 << 20) - (1 << 10), 0x80);
-	ram_check((1 << 24), 0x80);
-	ram_check((512 + 256 - 1) << 20, 0x80);
-	ram_check(0x80c0000, 0x80);
-	tolm = vx900_get_tolm () << 20;
-	if (tolm > (1 * (u32) GiB))
-		ram_check(1024 << 10, 0x80);
-	if (tolm > (2 * (u32) GiB))
-		ram_check(2048 << 20, 0x80);
-
-	printk(BIOS_DEBUG, "We passed RAM verify\n");
-
-	/* FIXME: read fb_size from CMOS, but until that is implemented, start
-	 * from 512MB */
-	vx900_set_chrome9hd_fb_size (512);
-
-	/* We got RAM working, now we can write the timestamps to RAM */
-	cbmem_recovery(0);
-
-	/* FIXME: See if this is needed or take this out please */
-	/* Disable Memcard and SDIO */
-	pci_or_config8(LPC, 0x51, (1 << 7) | (1 << 4));
-}
-- 
To view, visit https://review.coreboot.org/c/coreboot/+/36949
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: Id6aa669542bcfd774fa5571d790f59f156a39a4b
Gerrit-Change-Number: 36949
Gerrit-PatchSet: 1
Gerrit-Owner: Arthur Heymans arthur@aheymans.xyz
Gerrit-MessageType: newchange



    