Change in coreboot[master]: mb/google/mancomb: Add eSPI GPIO back to init table

[Martin Roth (Code Review)]

Martin Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/52123 )

Change subject: mb/google/mancomb: Add eSPI GPIO back to init table
......................................................................

mb/google/mancomb: Add eSPI GPIO back to init table

GPIOs should be configured in ramstage even if they are configured in an
earlier stage.

BUG=b:182211161
TEST=builds

Signed-off-by: Eric Lai 
Change-Id: I07d5c46d6ea6dc2bc9ab265d0c01772d653884cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52123
Tested-by: build bot (Jenkins) 
Reviewed-by: Raul Rangel 
---
M src/mainboard/google/mancomb/variants/baseboard/gpio.c
1 file changed, 8 insertions(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Raul Rangel: Looks good to me, approved

diff --git a/src/mainboard/google/mancomb/variants/baseboard/gpio.c b/src/mainboard/google/mancomb/variants/baseboard/gpio.c
index 1eb1b80..29fa866 100644
--- a/src/mainboard/google/mancomb/variants/baseboard/gpio.c
+++ b/src/mainboard/google/mancomb/variants/baseboard/gpio.c
@@ -108,7 +108,14 @@
    /* CLK_REQ0_L */
    PAD_NF(GPIO_92, CLK_REQ0_L, PULL_NONE),
    /* GPIO_93 - GPIO_103: Not available */
-	/* GPIO_104 - GPIO_108: eSPI configured in early stage */
+	/* ESPI1_DATA0 */
+	PAD_NF(GPIO_104, SPI2_DO_ESPI2_D0, PULL_NONE),
+	/* ESPI1_DATA1 */
+	PAD_NF(GPIO_105, SPI2_DI_ESPI2_D1, PULL_NONE),
+	/* ESPI1_DATA2 */
+	PAD_NF(GPIO_106, EMMC_SPI2_WP_L_ESPI2_D2, PULL_NONE),
+	/* ESPI1_DATA3 */
+	PAD_NF(GPIO_107, SPI2_HOLD_L_ESPI2_D3, PULL_NONE),
    /* EGPIO109 */
    PAD_NC(GPIO_109),
    /* GPIO_110 - GPIO_112: Not available */