Change in coreboot[master]: mb/google/brya: Change GPP_D15/D16 default to low

[EricR Lai (Code Review)]

EricR Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/52148 )

Change subject: mb/google/brya: Change GPP_D15/D16 default to low
......................................................................

mb/google/brya: Change GPP_D15/D16 default to low

WFC Camera driver will control the power sequence. Therefore, set default
to low.

BUG=b:184024459
TEST=abuilds

Signed-off-by: Eric Lai 
Change-Id: I7ce25b83a715a022e36289dc0abf0d39f5798eb0
---
M src/mainboard/google/brya/variants/baseboard/gpio.c
1 file changed, 2 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/48/52148/1

diff --git a/src/mainboard/google/brya/variants/baseboard/gpio.c b/src/mainboard/google/brya/variants/baseboard/gpio.c
index 6482b9c..dd33b49 100644
--- a/src/mainboard/google/brya/variants/baseboard/gpio.c
+++ b/src/mainboard/google/brya/variants/baseboard/gpio.c
@@ -148,9 +148,9 @@
    /* D14 : ISH_UART0_TXD ==> PCH_I2C_CAM_SCL */
    PAD_CFG_NF(GPP_D14, NONE, DEEP, NF3),
    /* D15 : ISH_UART0_RTS# ==> EN_WCAM_SENR_PWR */
-	PAD_CFG_GPO(GPP_D15, 1, DEEP),
+	PAD_CFG_GPO(GPP_D15, 0, DEEP),
    /* D16 : ISH_UART0_CTS# ==> EN_WCAM_PWR */
-	PAD_CFG_GPO(GPP_D16, 1, DEEP),
+	PAD_CFG_GPO(GPP_D16, 0, DEEP),
    /* D17 : UART1_RXD ==> SD_PE_PRSNT_L */
    PAD_CFG_GPI(GPP_D17, NONE, DEEP),
    /* D18 : UART1_TXD ==> SD_PE_RST_L */