[S] Change in coreboot[main]: mb/google/rex/var/kanix: Add support for audio codec/amp

[Tyler Wang (Code Review)]

Tyler Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/85023?usp=email )

Change subject: mb/google/rex/var/kanix: Add support for audio codec/amp
......................................................................

mb/google/rex/var/kanix: Add support for audio codec/amp

Add support for audio codec ALC5882I and audio amp ALC1019.

BUG=none
TEST=none

Change-Id: I0cac934004b0b1b72feaacea99a602fffd2f1457
Signed-off-by: Tyler Wang 
---
M src/mainboard/google/rex/variants/kanix/overridetree.cb
1 file changed, 27 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/85023/1

diff --git a/src/mainboard/google/rex/variants/kanix/overridetree.cb b/src/mainboard/google/rex/variants/kanix/overridetree.cb
index 272f92f..79b42b4 100644
--- a/src/mainboard/google/rex/variants/kanix/overridetree.cb
+++ b/src/mainboard/google/rex/variants/kanix/overridetree.cb
@@ -340,7 +340,25 @@
    			device generic 0 on end
    		end
                 end
-		device ref i2c0 on end #I2C0
+		device ref i2c0 on
+                        chip drivers/i2c/generic
+                                register "hid" = ""RTL5682""
+                                register "name" = ""RT58""
+                                register "desc" = ""Headset Codec""
+                                register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+                                # Set the jd_src to RT5668_JD1 for jack detection
+                                register "property_count" = "1"
+                                register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+                                register "property_list[0].name" = ""realtek,jd-src""
+                                register "property_list[0].integer" = "1"
+                                device i2c 1a on end
+                        end
+                        chip drivers/generic/alc1015
+                                register "hid" = ""RTL1019""
+                                register "sdb" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+                                device generic 0 on end
+                        end
+                end #I2C0
    	device ref i2c1 on
    		chip drivers/i2c/hid
    			register "generic.hid" = ""ELAN9004""
@@ -514,6 +532,13 @@
    			end
    		end
    	end
-		device ref hda on end
+		device ref hda on
+                        chip drivers/sof
+                                register "spkr_tplg" = "rt1019"
+                                register "jack_tplg" = "rt5682"
+                                register "mic_tplg" = "_2ch_pdm0"
+                                device generic 0 on end
+                        end
+                end
    end
 end