EricR Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/40114 )
Change subject: mb/google/deltaur: Enable Cirque touchpad ......................................................................
mb/google/deltaur: Enable Cirque touchpad
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai ericr_lai@compal.corp-partner.google.com Change-Id: Ia354702c8054b5826d45896f7bff268335726028 --- M src/mainboard/google/deltaur/variants/deltan/overridetree.cb 1 file changed, 14 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/14/40114/1
diff --git a/src/mainboard/google/deltaur/variants/deltan/overridetree.cb b/src/mainboard/google/deltaur/variants/deltan/overridetree.cb index 750c3c5..b56a23b 100644 --- a/src/mainboard/google/deltaur/variants/deltan/overridetree.cb +++ b/src/mainboard/google/deltaur/variants/deltan/overridetree.cb @@ -1,5 +1,7 @@ chip soc/intel/tigerlake
+ register "pmc_gpe0_dw1" = "GPP_E" + device domain 0 on end
@@ -22,4 +24,16 @@ device i2c 34 on end end end # I2C #0 + + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Cirque Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.wake" = "GPE0_DW1_7" + register "hid_desc_reg_offset" = "0x20" + device i2c 2c on end + end + end # I2C #1 end
Hello build bot (Jenkins), Tim Wawrzynczak,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/40114
to look at the new patch set (#2).
Change subject: mb/google/deltaur: Enable Cirque touchpad ......................................................................
mb/google/deltaur: Enable Cirque touchpad
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai ericr_lai@compal.corp-partner.google.com Change-Id: Ia354702c8054b5826d45896f7bff268335726028 --- M src/mainboard/google/deltaur/variants/deltan/overridetree.cb 1 file changed, 14 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/14/40114/2
Hello Bora Guvendik, build bot (Jenkins), Selma Bensaid, Tim Wawrzynczak, Kevin Chowski,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/40114
to look at the new patch set (#3).
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
mb/google/deltaur: Enable Cirque touchpad for Deltan
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai ericr_lai@compal.corp-partner.google.com Change-Id: Ia354702c8054b5826d45896f7bff268335726028 --- M src/mainboard/google/deltaur/variants/deltan/overridetree.cb 1 file changed, 14 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/14/40114/3
Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/40114 )
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
Patch Set 4:
(2 comments)
https://review.coreboot.org/c/coreboot/+/40114/2//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/40114/2//COMMIT_MSG@7 PS2, Line 7: touchpad for Deltan
https://review.coreboot.org/c/coreboot/+/40114/2/src/mainboard/google/deltau... File src/mainboard/google/deltaur/variants/deltan/overridetree.cb:
https://review.coreboot.org/c/coreboot/+/40114/2/src/mainboard/google/deltau... PS2, Line 3: register "pmc_gpe0_dw1" = "GPP_E" I would prefer the GPE settings go into the baseboard devicetree, they should hopefully be identical between the variants...
EricR Lai has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/40114 )
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
Patch Set 4:
(2 comments)
https://review.coreboot.org/c/coreboot/+/40114/2//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/40114/2//COMMIT_MSG@7 PS2, Line 7: touchpad
for Deltan
Done
https://review.coreboot.org/c/coreboot/+/40114/2/src/mainboard/google/deltau... File src/mainboard/google/deltaur/variants/deltan/overridetree.cb:
https://review.coreboot.org/c/coreboot/+/40114/2/src/mainboard/google/deltau... PS2, Line 3: register "pmc_gpe0_dw1" = "GPP_E"
I would prefer the GPE settings go into the baseboard devicetree, they should hopefully be identical […]
will do
Hello Bora Guvendik, build bot (Jenkins), Selma Bensaid, Tim Wawrzynczak, Kevin Chowski,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/40114
to look at the new patch set (#5).
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
mb/google/deltaur: Enable Cirque touchpad for Deltan
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai ericr_lai@compal.corp-partner.google.com Change-Id: Ia354702c8054b5826d45896f7bff268335726028 --- M src/mainboard/google/deltaur/variants/baseboard/devicetree.cb M src/mainboard/google/deltaur/variants/deltan/overridetree.cb 2 files changed, 13 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/14/40114/5
EricR Lai has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/40114 )
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
Patch Set 5:
(1 comment)
https://review.coreboot.org/c/coreboot/+/40114/2/src/mainboard/google/deltau... File src/mainboard/google/deltaur/variants/deltan/overridetree.cb:
https://review.coreboot.org/c/coreboot/+/40114/2/src/mainboard/google/deltau... PS2, Line 3: register "pmc_gpe0_dw1" = "GPP_E"
will do
Done
Tim Wawrzynczak has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/40114 )
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
Patch Set 5: Code-Review+2
Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/40114 )
Change subject: mb/google/deltaur: Enable Cirque touchpad for Deltan ......................................................................
mb/google/deltaur: Enable Cirque touchpad for Deltan
Reference Arcada to add device tree for Cirque touchpad.
BUG=b:152931802
Signed-off-by: Eric Lai ericr_lai@compal.corp-partner.google.com Change-Id: Ia354702c8054b5826d45896f7bff268335726028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40114 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Tim Wawrzynczak twawrzynczak@chromium.org --- M src/mainboard/google/deltaur/variants/baseboard/devicetree.cb M src/mainboard/google/deltaur/variants/deltan/overridetree.cb 2 files changed, 13 insertions(+), 1 deletion(-)
Approvals: build bot (Jenkins): Verified Tim Wawrzynczak: Looks good to me, approved
diff --git a/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb b/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb index a30c12d..e0b3d50 100644 --- a/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/deltaur/variants/baseboard/devicetree.cb @@ -11,7 +11,7 @@
# TODO: Figure out GPE DW1&2 register "pmc_gpe0_dw0" = "GPP_C" - #register "pmc_gpe0_dw1" = "??" + register "pmc_gpe0_dw1" = "GPP_E" #register "pmc_gpe0_dw2" = "??"
# Wilco EC host command ranges diff --git a/src/mainboard/google/deltaur/variants/deltan/overridetree.cb b/src/mainboard/google/deltaur/variants/deltan/overridetree.cb index be1f29f..13883d1 100644 --- a/src/mainboard/google/deltaur/variants/deltan/overridetree.cb +++ b/src/mainboard/google/deltaur/variants/deltan/overridetree.cb @@ -28,4 +28,16 @@ device i2c 34 on end end end # I2C #0 + + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Cirque Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.wake" = "GPE0_DW1_07" + register "hid_desc_reg_offset" = "0x20" + device i2c 2c on end + end + end # I2C #1 end