[M] Change in coreboot[master]: [Test] Test for TP and TS sda hold time

[Tyler Wang (Code Review)]

Tyler Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/73349 )

Change subject: [Test] Test for TP and TS sda hold time
......................................................................

[Test] Test for TP and TS sda hold time

Change-Id: Iec2f72da80ffe8d4dd494caabbe1a97e52a81e78
---
M src/mainboard/google/brya/variants/craask/overridetree.cb
1 file changed, 71 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/73349/1

diff --git a/src/mainboard/google/brya/variants/craask/overridetree.cb b/src/mainboard/google/brya/variants/craask/overridetree.cb
index 5b9bf80..5f12558 100644
--- a/src/mainboard/google/brya/variants/craask/overridetree.cb
+++ b/src/mainboard/google/brya/variants/craask/overridetree.cb
@@ -113,6 +113,68 @@
    # Enable the Cnvi BT Audio Offload
    register "cnvi_bt_audio_offload" = "1"

+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| I2C0              | TPM. Early init is        |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | Sub-board(PSensor)/WCAM   |
+	#| I2C3              | Audio                     |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST_PLUS,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST_PLUS,
+				.scl_lcnt = 55,
+				.scl_hcnt = 30,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 30,
+			}
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 7,
+			}
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 158,
+				.scl_hcnt = 79,
+				.sda_hold = 40,
+			}
+		},
+	}"
+
+
    register "power_limits_config[ADL_N_041_6W_CORE]" = "{
    	.tdp_pl1_override = 6,
    	.tdp_pl2_override = 25,