Change in coreboot[master]: superio/ite/it8720f: fix power control init

[Felix Held (Code Review)]

Felix Held has uploaded this change for review. ( https://review.coreboot.org/27648

Change subject: superio/ite/it8720f: fix power control init
......................................................................

superio/ite/it8720f: fix power control init

Change-Id: I3c26a2837e451dbfd3cee82e9beedc0f4a90af03
Signed-off-by: Felix Held 
---
M src/superio/ite/it8720f/it8720f.h
M src/superio/ite/it8720f/superio.c
2 files changed, 21 insertions(+), 7 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/48/27648/1

diff --git a/src/superio/ite/it8720f/it8720f.h b/src/superio/ite/it8720f/it8720f.h
index f8b7efb..093e895 100644
--- a/src/superio/ite/it8720f/it8720f.h
+++ b/src/superio/ite/it8720f/it8720f.h
@@ -30,4 +30,8 @@
 #define IT8720F_GPIO 0x07 /* GPIO (including SPI flash interface) */
 #define IT8720F_CIR  0x0a /* Consumer IR */

+/* Registers in LDNs */
+#define IT8720F_EC_PCR1	0xf2
+#define IT8720F_EC_PCR2	0xf4
+
 #endif /* SUPERIO_ITE_IT8720F_H */
diff --git a/src/superio/ite/it8720f/superio.c b/src/superio/ite/it8720f/superio.c
index 142686e..b3e5222 100644
--- a/src/superio/ite/it8720f/superio.c
+++ b/src/superio/ite/it8720f/superio.c
@@ -33,17 +33,27 @@
 static void power_control_init(struct device *dev)
 {
    int power_on = MAINBOARD_POWER_OFF;
-	u8 addr, value;
+	u8 value;

get_option(&power_on, "power_on_after_fail");
-	if (power_on == MAINBOARD_POWER_OFF)
-		return;
+
    pnp_enter_conf_mode(dev);
    pnp_set_logical_device(dev);
-	addr = power_on == MAINBOARD_POWER_KEEP ? 0xf2 : 0xf4;
-	value = pnp_read_config(dev, addr);
-	value |= BIT(5);
-	pnp_write_config(dev, addr, value);
+
+	value = pnp_read_config(dev, IT8720F_EC_PCR1);
+	if (power_on == MAINBOARD_POWER_KEEP)
+		value |= (1<<5);
+	else
+		value &= ~(1<<5);
+	pnp_write_config(dev, IT8720F_EC_PCR1, value);
+
+	value = pnp_read_config(dev, IT8720F_EC_PCR2);
+	if (power_on == MAINBOARD_POWER_ON)
+		value |= (1<<5);
+	else
+		value &= ~(1<<5);
+	pnp_write_config(dev, IT8720F_EC_PCR2, value);
+
    pnp_exit_conf_mode(dev);
 }