Weimin Wu has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/79163?usp=email )
Change subject: mb/google/brya/var/anraggar: Add MIPI camera device ......................................................................
mb/google/brya/var/anraggar: Add MIPI camera device
Enable MIPI camera for anraggar project.
BUG=b:309518095 TEST=Camera APP working
Change-Id: I6a82557c94203f24449588a6005abc53cc29ca76 Signed-off-by: wuweimin wuweimin@huaqin.corp-partner.google.com --- M src/mainboard/google/brya/variants/anraggar/gpio.c M src/mainboard/google/brya/variants/anraggar/overridetree.cb 2 files changed, 26 insertions(+), 20 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/63/79163/1
diff --git a/src/mainboard/google/brya/variants/anraggar/gpio.c b/src/mainboard/google/brya/variants/anraggar/gpio.c index cdbb72f..686ae8b 100644 --- a/src/mainboard/google/brya/variants/anraggar/gpio.c +++ b/src/mainboard/google/brya/variants/anraggar/gpio.c @@ -32,7 +32,7 @@ /* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL ==> NC */ PAD_NC_LOCK(GPP_D8, NONE, LOCK_CONFIG), /* D13 : NC ==> EN_PP1800_WCAM_X */ - PAD_CFG_GPO_LOCK(GPP_D13, 0, LOCK_CONFIG), + PAD_CFG_GPO_LOCK(GPP_D13, 1, LOCK_CONFIG),
/* E20 : DDP2_CTRLCLK ==> HDMI_DDC_SCL ==> NC */ PAD_NC_LOCK(GPP_E20, NONE, LOCK_CONFIG), @@ -49,7 +49,7 @@ /* F12 : GSXDOUT ==> WWAN_RST_L */ PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG), /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD ==> EN_PP2800_AVDD*/ - PAD_CFG_GPO(GPP_F18, 0, DEEP), + PAD_CFG_GPO(GPP_F18, 1, DEEP), /* F23 : V1P05_CTRL ==> V1P05EXT_CTRL ==> NC*/ PAD_NC_LOCK(GPP_F23, NONE, LOCK_CONFIG),
diff --git a/src/mainboard/google/brya/variants/anraggar/overridetree.cb b/src/mainboard/google/brya/variants/anraggar/overridetree.cb index defb8e6..9c6492d 100644 --- a/src/mainboard/google/brya/variants/anraggar/overridetree.cb +++ b/src/mainboard/google/brya/variants/anraggar/overridetree.cb @@ -207,7 +207,7 @@ register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
register "cio2_num_ports" = "1" - register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used + register "cio2_lanes_used" = "{4}" # 4 CSI Camera lanes are used register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" register "cio2_prt[0]" = "1" device generic 0 on end @@ -244,18 +244,17 @@ end device ref i2c2 on chip drivers/intel/mipi_camera - register "acpi_hid" = ""OVTI5675"" + register "acpi_hid" = ""OVTIDB10"" register "acpi_uid" = "0" register "acpi_name" = ""CAM0"" - register "chip_name" = ""Ov 5675 Camera"" + register "chip_name" = ""Ov 13b10 Camera"" register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
- register "ssdb.lanes_used" = "2" - register "ssdb.link_used" = "1" + register "ssdb.lanes_used" = "4" register "ssdb.vcm_type" = "0x0C" register "vcm_name" = ""VCM0"" register "num_freq_entries" = "1" - register "link_freq[0]" = "DEFAULT_LINK_FREQ" + register "link_freq[0]" = "560 * MHz" register "remote_name" = ""IPU0""
register "has_power_resource" = "1" @@ -264,16 +263,15 @@ register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X - register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1200_WCAM_X register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
#_ON - register "on_seq.ops_cnt" = "5" + register "on_seq.ops_cnt" = "4" register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" - register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" - register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
#_OFF register "off_seq.ops_cnt" = "4" @@ -285,30 +283,38 @@ device i2c 36 on end end chip drivers/intel/mipi_camera - register "acpi_uid" = "3" + register "acpi_uid" = "2" register "acpi_name" = ""VCM0"" - register "chip_name" = ""DW AF DAC"" + register "chip_name" = ""DW9714 VCM "" register "device_type" = "INTEL_ACPI_CAMERA_VCM"
- register "pr0" = ""\_SB.PCI0.I2C2.CAM0.PRIC"" register "vcm_compat" = ""dongwoon,dw9714""
+ register "has_power_resource" = "1" + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_F18" # EN_PP2800_AVDD + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 0C on end end chip drivers/intel/mipi_camera - register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" register "acpi_uid" = "1" register "acpi_name" = ""NVM0"" - register "chip_name" = ""GT24C08"" + register "chip_name" = ""GT24P64E"" register "device_type" = "INTEL_ACPI_CAMERA_NVM"
- register "pr0" = ""\_SB.PCI0.I2C2.CAM0.PRIC"" - register "nvm_size" = "0x2000" register "nvm_pagesize" = "1" register "nvm_readonly" = "1" register "nvm_width" = "0x10" - register "nvm_compat" = ""atmel,24c08"" + register "nvm_compat" = ""atmel,24c64""
device i2c 50 on end end
-
Weimin Wu (Code Review)