Change in coreboot[master]: soc/intel/skylake: always select NO_UART_ON_SUPERIO

[Vadim Bendebury (Code Review)]

Vadim Bendebury has uploaded this change for review. ( https://review.coreboot.org/23602

Change subject: soc/intel/skylake: always select NO_UART_ON_SUPERIO
......................................................................

soc/intel/skylake: always select NO_UART_ON_SUPERIO

Not selecting NO_UART_ON_SUPERIO causes the DRIVERS_UART_8250IO config
flag to be enabled in src/drivers/uart/Kconfig, which in turn causes
the code for this driver to be included in the image by default.

BRANCH=none
BUG=none
TEST=TBD

Change-Id: I6c7071ac1a275435830e2ea9b7e5996594ea06ed
Signed-off-by: Vadim Bendebury 
---
M src/soc/intel/skylake/Kconfig
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/02/23602/1

diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index 34893dc..9a9d9d2 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -45,6 +45,7 @@
    select PCIEXP_COMMON_CLOCK
    select PCIEXP_L1_SUB_STATE
    select PCIEX_LENGTH_64MB
+	select NO_UART_ON_SUPERIO
    select REG_SCRIPT
    select RELOCATABLE_MODULES
    select RELOCATABLE_RAMSTAGE
@@ -209,7 +210,6 @@
    select CONSOLE_SERIAL
    select DRIVERS_UART
    select DRIVERS_UART_8250MEM_32
-	select NO_UART_ON_SUPERIO

config UART_FOR_CONSOLE
    int "Index for LPSS UART port to use for console"