Nico Huber has submitted this change and it was merged. ( https://review.coreboot.org/20598 )
Change subject: gfx_test: Update to use *libhwbase* new PCI interface ......................................................................
gfx_test: Update to use *libhwbase* new PCI interface
Thereby, move `gfx_test` into HW.GFX.GMA to make package dependencies easier to handle.
Change-Id: Ie8a1251354b4fff57eef8c4bada8b49aa04ef382 Signed-off-by: Nico Huber nico.h@gmx.de Reviewed-on: https://review.coreboot.org/20598 Reviewed-by: Paul Menzel paulepanter@users.sourceforge.net Reviewed-by: Arthur Heymans arthur@aheymans.xyz --- M README.md M gfxtest/Makefile.inc D gfxtest/gfx_test.ads M gfxtest/gfx_test_main.adb R gfxtest/hw-gfx-gma-gfx_test.adb A gfxtest/hw-gfx-gma-gfx_test.ads 6 files changed, 58 insertions(+), 78 deletions(-)
Approvals: Nico Huber: Verified Paul Menzel: Looks good to me, but someone else must approve Arthur Heymans: Looks good to me, approved
diff --git a/README.md b/README.md index 998b8cc..7bfb504 100644 --- a/README.md +++ b/README.md @@ -40,16 +40,16 @@ You can either write your own `.config`, link one of the shipped files in `configs/`, e.g.:
- $ ln -s configs/posix libhwbase/.config + $ ln -s configs/linux libhwbase/.config
or overwrite the config filename by specifying `cnf=<configfile>` on the make command line.
-Let's install *libhwbase*. We'll need `configs/posix` to build regular +Let's install *libhwbase*. We'll need `configs/linux` to build regular Linux executables:
$ cd libhwbase - $ make cnf=configs/posix install + $ make cnf=configs/linux install
By default this installs into a new subdirectory `dest`. You can however overwrite this decision by specifying `DESTDIR=`. @@ -80,11 +80,12 @@ command line or with *i915* blacklisted). After running *i915* it only works by chance.
-When running `gfx_test` (as root), it will ask for a single argument: -The path to a sysfs PCI-device node, where it will find the graphics -hardware. Usually this is PCI device 00:02.0: +When running `gfx_test` (as root), it will access the graphics hard- +ware through the sysfs PCI interface. The path is
- $ sudo build/gfx_test /sys/devices/pci0000:00/0000:00:02.0/ + /sys/devices/pci0000:00/0000:00:02.0/ + +for all supported platforms.
If you chose the right config above, you should be presented with a nice test image. However, `gfx_test` is one-way only: The graphics diff --git a/gfxtest/Makefile.inc b/gfxtest/Makefile.inc index 158665a..ff7fa8e 100644 --- a/gfxtest/Makefile.inc +++ b/gfxtest/Makefile.inc @@ -1,4 +1,4 @@ -gfxinit-y += gfx_test.adb -gfxinit-y += gfx_test.ads +gfxinit-y += hw-gfx-gma-gfx_test.adb +gfxinit-y += hw-gfx-gma-gfx_test.ads
gfxinit-main-y = gfx_test_main.adb diff --git a/gfxtest/gfx_test.ads b/gfxtest/gfx_test.ads deleted file mode 100644 index 52e268e..0000000 --- a/gfxtest/gfx_test.ads +++ /dev/null @@ -1,5 +0,0 @@ -package GFX_Test is - - procedure Main; - -end GFX_Test; diff --git a/gfxtest/gfx_test_main.adb b/gfxtest/gfx_test_main.adb index d3666c9..2e1d5da 100644 --- a/gfxtest/gfx_test_main.adb +++ b/gfxtest/gfx_test_main.adb @@ -1,6 +1,6 @@ -with GFX_Test; +with HW.GFX.GMA.GFX_Test;
procedure GFX_Test_Main is begin - GFX_Test.Main; + HW.GFX.GMA.GFX_Test.Main; end GFX_Test_Main; diff --git a/gfxtest/gfx_test.adb b/gfxtest/hw-gfx-gma-gfx_test.adb similarity index 69% rename from gfxtest/gfx_test.adb rename to gfxtest/hw-gfx-gma-gfx_test.adb index e7fb80c..b7060ec 100644 --- a/gfxtest/gfx_test.adb +++ b/gfxtest/hw-gfx-gma-gfx_test.adb @@ -1,24 +1,18 @@ -with System.Storage_Elements; +with Ada.Unchecked_Conversion; with Ada.Command_Line; with Interfaces.C;
-with HW.File; with HW.Debug; +with HW.PCI.Dev; +with HW.MMIO_Range; with HW.GFX.GMA; with HW.GFX.GMA.Display_Probing;
-use HW; -use HW.GFX; +package body HW.GFX.GMA.GFX_Test +is + pragma Disable_Atomic_Synchronization;
-package body GFX_Test is - - MMIO_Size : constant := 2 * 1024 * 1024; - subtype MMIO_Range is Natural range 0 .. MMIO_Size - 1; - subtype MMIO_Buffer is Buffer (MMIO_Range); - MMIO_Dummy : MMIO_Buffer - with - Alignment => 16#1000#, - Volatile; + package Dev is new PCI.Dev (PCI.Address'(0, 2, 0));
type Pixel_Type is record Red : Byte; @@ -34,16 +28,23 @@ Alpha at 3 range 0 .. 7; end record;
+ function Pixel_To_Word (P : Pixel_Type) return Word32 + with + SPARK_Mode => Off + is + function To_Word is new Ada.Unchecked_Conversion (Pixel_Type, Word32); + begin + return To_Word (P); + end Pixel_To_Word; + Max_W : constant := 4096; Max_H : constant := 2160; FB_Align : constant := 16#0004_0000#; - type Screen_Type is - array (0 .. 3 * (Max_W * Max_H + FB_Align / 4) - 1) of Pixel_Type; + subtype Screen_Index is Natural range + 0 .. 3 * (Max_W * Max_H + FB_Align / 4) - 1; + type Screen_Type is array (Screen_Index) of Word32;
- Screen : Screen_Type - with - Alignment => 16#1000#, - Volatile; + package Screen is new MMIO_Range (0, Word32, Screen_Index, Screen_Type);
Pipes : GMA.Pipe_Configs;
@@ -76,7 +77,6 @@ (Framebuffer : Framebuffer_Type; Pipe : GMA.Pipe_Index) is - use type HW.Word32; P : Pixel_Type; -- We have pixel offset wheras the framebuffer has a byte offset Offset_Y : Natural := Natural (Framebuffer.Offset / 4); @@ -90,7 +90,7 @@ else P := Fill (X, Y, Framebuffer, Pipe); end if; - Screen (Offset) := P; + Screen.Write (Offset, Pixel_To_Word (P)); Offset := Offset + 1; end loop; Offset_Y := Offset_Y + Natural (Framebuffer.Stride); @@ -102,8 +102,6 @@ Mode : in Mode_Type; Offset : in out Word32) is - use type HW.Int32; - use type HW.Word32; begin Offset := (Offset + FB_Align - 1) and not (FB_Align - 1); FB := @@ -119,7 +117,7 @@ is use type HW.GFX.GMA.Port_Type;
- Offset : HW.Word32 := 0; + Offset : Word32 := 0; begin GMA.Display_Probing.Scan_Ports (Pipes);
@@ -135,65 +133,46 @@ GMA.Dump_Configs (Pipes); end Prepare_Configs;
- procedure Print_Usage is - begin - Debug.Put_Line - ("Usage: " & Ada.Command_Line.Command_Name & " <sysfs-pci-path>"); - Debug.New_Line; - end Print_Usage; - procedure Main is - use System.Storage_Elements; - use type HW.GFX.GMA.Port_Type; + use type HW.Word64; use type Interfaces.C.int;
- MMIO_Mapped, - Screen_Mapped, + Res_Addr : Word64; + + Dev_Init, Initialized : Boolean;
function iopl (level : Interfaces.C.int) return Interfaces.C.int; pragma Import (C, iopl, "iopl"); begin - if Ada.Command_Line.Argument_Count /= 1 then - Print_Usage; - return; - end if; - if iopl (3) /= 0 then Debug.Put_Line ("Failed to change i/o privilege level."); return; end if;
- File.Map - (Path => Ada.Command_Line.Argument (1) & "/resource0", - Addr => Word64 (To_Integer (MMIO_Dummy'Address)), - Len => MMIO_Dummy'Size / 8, - Readable => True, - Writable => True, - Success => MMIO_Mapped); - if not MMIO_Mapped then - Debug.Put_Line - ("Failed to map '" & Ada.Command_Line.Argument (1) & "/resource0'."); + Dev.Initialize (Dev_Init); + if not Dev_Init then + Debug.Put_Line ("Failed to map PCI config."); return; end if;
- File.Map - (Path => Ada.Command_Line.Argument (1) & "/resource2", - Addr => Word64 (To_Integer (Screen'Address)), - Len => Screen'Size / 8, - Readable => True, - Writable => True, - Success => Screen_Mapped); - if not Screen_Mapped then - Debug.Put_Line - ("Failed to map '" & Ada.Command_Line.Argument (1) & "/resource2'."); + Dev.Map (Res_Addr, PCI.Res2, WC => True); + if Res_Addr = 0 then + Debug.Put_Line ("Failed to map PCI resource2."); + return; + end if; + Screen.Set_Base_Address (Res_Addr); + + Dev.Map (Res_Addr, PCI.Res0); + if Res_Addr = 0 then + Debug.Put_Line ("Failed to map PCI resource0."); return; end if;
GMA.Initialize - (MMIO_Base => Word64 (To_Integer (MMIO_Dummy'Address)), + (MMIO_Base => Res_Addr, Clean_State => True, Success => Initialized);
@@ -212,4 +191,4 @@ end if; end Main;
-end GFX_Test; +end HW.GFX.GMA.GFX_Test; diff --git a/gfxtest/hw-gfx-gma-gfx_test.ads b/gfxtest/hw-gfx-gma-gfx_test.ads new file mode 100644 index 0000000..71da057 --- /dev/null +++ b/gfxtest/hw-gfx-gma-gfx_test.ads @@ -0,0 +1,5 @@ +package HW.GFX.GMA.GFX_Test is + + procedure Main; + +end HW.GFX.GMA.GFX_Test;
-
Nico Huber (Code Review)