Alec Ari (neotheuser@ymail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4590
-gerrit
commit bbfc6e98c10c3fb94a933bfeb11f70e4dc783ee7 Author: Alec Ari neotheuser@ymail.com Date: Mon Dec 30 01:28:14 2013 -0600
Remove dead files from Super I/O dir
early_serial (or early_init) are only used by the following chips:
Nuvoton WPCM450 ITE IT8728F SMSC SIO1007 Winbond W83627DHG
This patch only removes files that are not in use and does not destroy support for any motherboards.
This threw me off a bit when adding support for Nuvoton NCT6779D
Change-Id: Ieaa96fb51647328350fae827832eef745ee75bce Signed-off-by: Alec Ari neotheuser@ymail.com --- src/superio/Kconfig | 1 - src/superio/Makefile.inc | 1 - src/superio/fintek/f71805f/early_serial.c | 47 --------- src/superio/fintek/f71859/early_serial.c | 47 --------- src/superio/fintek/f71863fg/early_serial.c | 47 --------- src/superio/fintek/f71872/early_serial.c | 47 --------- src/superio/fintek/f71889/early_serial.c | 46 --------- src/superio/intel/i3100/early_serial.c | 56 ----------- src/superio/ite/it8661f/early_serial.c | 79 --------------- src/superio/ite/it8671f/early_serial.c | 105 -------------------- src/superio/ite/it8673f/early_serial.c | 90 ----------------- src/superio/ite/it8705f/early_serial.c | 82 ---------------- src/superio/ite/it8712f/early_serial.c | 117 ---------------------- src/superio/ite/it8716f/early_init.c | 37 ------- src/superio/ite/it8716f/early_serial.c | 62 ------------ src/superio/ite/it8718f/early_serial.c | 104 -------------------- src/superio/ite/it8721f/early_serial.c | 93 ------------------ src/superio/ite/it8772f/early_serial.c | 131 ------------------------- src/superio/nsc/pc8374/early_init.c | 56 ----------- src/superio/nsc/pc87309/early_serial.c | 30 ------ src/superio/nsc/pc87351/early_serial.c | 31 ------ src/superio/nsc/pc87360/early_serial.c | 31 ------ src/superio/nsc/pc87366/early_serial.c | 31 ------ src/superio/nsc/pc87392/early_serial.c | 30 ------ src/superio/nsc/pc87417/early_init.c | 54 ---------- src/superio/nsc/pc87417/early_serial.c | 38 ------- src/superio/nsc/pc87427/early_init.c | 54 ---------- src/superio/nsc/pc97317/early_serial.c | 49 --------- src/superio/nuvoton/nct5104d/Makefile.inc | 1 - src/superio/nuvoton/nct5104d/early_init.c | 47 --------- src/superio/serverengines/Kconfig | 21 ---- src/superio/serverengines/pilot/early_init.c | 122 ----------------------- src/superio/serverengines/pilot/early_serial.c | 57 ----------- src/superio/serverengines/pilot/pilot.h | 33 ------- src/superio/smsc/fdc37m60x/early_serial.c | 77 --------------- src/superio/smsc/lpc47b272/early_serial.c | 53 ---------- src/superio/smsc/lpc47b397/early_serial.c | 46 --------- src/superio/smsc/lpc47m10x/early_serial.c | 51 ---------- src/superio/smsc/lpc47m15x/early_serial.c | 45 --------- src/superio/smsc/lpc47n207/early_serial.c | 97 ------------------ src/superio/smsc/lpc47n217/early_serial.c | 123 ----------------------- src/superio/smsc/lpc47n227/early_serial.c | 125 ----------------------- src/superio/smsc/smscsuperio/early_serial.c | 46 --------- src/superio/winbond/w83627ehg/early_init.c | 38 ------- src/superio/winbond/w83627ehg/early_serial.c | 46 --------- src/superio/winbond/w83627hf/early_init.c | 38 ------- src/superio/winbond/w83627hf/early_serial.c | 59 ----------- src/superio/winbond/w83627thg/early_serial.c | 58 ----------- src/superio/winbond/w83627uhg/early_serial.c | 57 ----------- src/superio/winbond/w83697hf/early_serial.c | 56 ----------- src/superio/winbond/w83977f/early_serial.c | 45 --------- src/superio/winbond/w83977tf/early_serial.c | 47 --------- 52 files changed, 2984 deletions(-)
diff --git a/src/superio/Kconfig b/src/superio/Kconfig index 32e60bb..2e84430 100644 --- a/src/superio/Kconfig +++ b/src/superio/Kconfig @@ -26,7 +26,6 @@ source src/superio/ite/Kconfig source src/superio/nsc/Kconfig source src/superio/nuvoton/Kconfig source src/superio/renesas/Kconfig -source src/superio/serverengines/Kconfig source src/superio/smsc/Kconfig source src/superio/via/Kconfig source src/superio/winbond/Kconfig diff --git a/src/superio/Makefile.inc b/src/superio/Makefile.inc index e34fa89..a8f9d49 100644 --- a/src/superio/Makefile.inc +++ b/src/superio/Makefile.inc @@ -23,7 +23,6 @@ subdirs-y += ite subdirs-y += nsc subdirs-y += nuvoton subdirs-y += renesas -#subdirs-y += serverengines subdirs-y += smsc subdirs-y += via subdirs-y += winbond diff --git a/src/superio/fintek/f71805f/early_serial.c b/src/superio/fintek/f71805f/early_serial.c deleted file mode 100644 index 827f870..0000000 --- a/src/superio/fintek/f71805f/early_serial.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Corey Osgood corey@slightlyhackish.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for the Fintek F71805F/FG Super I/O chip. */ - -#include <arch/io.h> -#include "f71805f.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void f71805f_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/fintek/f71859/early_serial.c b/src/superio/fintek/f71859/early_serial.c deleted file mode 100644 index 4401714..0000000 --- a/src/superio/fintek/f71859/early_serial.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Marc Jones marcj303@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for the Fintek F71859 Super I/O chip. */ - -#include <arch/io.h> -#include "f71859.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void f71859_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/fintek/f71863fg/early_serial.c b/src/superio/fintek/f71863fg/early_serial.c deleted file mode 100644 index 5d1cfb7..0000000 --- a/src/superio/fintek/f71863fg/early_serial.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Corey Osgood corey@slightlyhackish.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for the Fintek F71863FG Super I/O chip. */ - -#include <arch/io.h> -#include "f71863fg.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void f71863fg_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/fintek/f71872/early_serial.c b/src/superio/fintek/f71872/early_serial.c deleted file mode 100644 index af5cdb3..0000000 --- a/src/superio/fintek/f71872/early_serial.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Corey Osgood corey@slightlyhackish.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for the Fintek F71872F/FG Super I/O chip. */ - -#include <arch/io.h> -#include "f71872.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void f71872_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/fintek/f71889/early_serial.c b/src/superio/fintek/f71889/early_serial.c deleted file mode 100644 index 9623cbd..0000000 --- a/src/superio/fintek/f71889/early_serial.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Alec Ari neotheuser@ymail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/io.h> -#include "f71889.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void f71889_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/intel/i3100/early_serial.c b/src/superio/intel/i3100/early_serial.c deleted file mode 100644 index f95cf8a..0000000 --- a/src/superio/intel/i3100/early_serial.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Arastra, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "i3100.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - - outb(0x80, port); - outb(0x86, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - - outb(0x68, port); - outb(0x08, port); -} - -/* Enable device interrupts, set UART_CLK predivide. */ -static void i3100_configure_uart_clk(device_t dev, u8 predivide) -{ - pnp_enter_ext_func_mode(dev); - pnp_write_config(dev, I3100_SIW_CONFIGURATION, (predivide << 2) | 1); - pnp_exit_ext_func_mode(dev); -} - -static void i3100_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/ite/it8661f/early_serial.c b/src/superio/ite/it8661f/early_serial.c deleted file mode 100644 index ee132fa..0000000 --- a/src/superio/ite/it8661f/early_serial.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8661f.h" - -/* Perform MB PnP setup to put the SIO chip at 0x3f0. */ -/* Base address 0x3f0: 0x86 0x80 0x55 0x55. */ -/* Base address 0x3bd: 0x86 0x80 0x55 0xaa. */ -/* Base address 0x370: 0x86 0x80 0xaa 0x55. */ -static void pnp_enter_ext_func_mode(device_t dev) -{ - int i; - u16 port = dev >> 8; - - /* TODO: Don't hardcode Super I/O config port to 0x3f0. */ - outb(0x86, IT8661F_ISA_PNP_PORT); - outb(0x80, IT8661F_ISA_PNP_PORT); - outb(0x55, IT8661F_ISA_PNP_PORT); - outb(0x55, IT8661F_ISA_PNP_PORT); - - /* Sequentially write the 32 special values. */ - for (i = 0; i < 32; i++) - outb(init_values[i], port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - pnp_write_config(dev, IT8661F_REG_CC, (1 << 1)); -} - -/* - * The logical devices will only be involved in the ISA PnP sequence if their - * respective enable bits in IT8661F_REG_LDE are set. - * - * TODO: Find out if we actually need this (we use MB PnP mode). - * - * Bits: FDC (0), Com1 (1), Com2 (2), PP (3), IR (4). Bits 5-7 are reserved. - */ -static void it8661f_enable_logical_devices(device_t dev) -{ - pnp_enter_ext_func_mode(dev); - pnp_write_config(dev, IT8661F_REG_LDE, 0x1f); - pnp_exit_ext_func_mode(dev); -} - -static void it8661f_set_clkin(device_t dev, u8 clkin) -{ - pnp_enter_ext_func_mode(dev); - pnp_write_config(dev, IT8661F_REG_SWSUSP, (clkin << 1)); - pnp_exit_ext_func_mode(dev); -} - -static void it8661f_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/ite/it8671f/early_serial.c b/src/superio/ite/it8671f/early_serial.c deleted file mode 100644 index c2ba6e0..0000000 --- a/src/superio/ite/it8671f/early_serial.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8671f.h" - -/* The base address is 0x3f0, 0x3bd, or 0x370, depending on config bytes. */ -#define SIO_BASE 0x3f0 -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8671F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8671F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8671F_CONFIG_REG_LDE 0x23 /* PnP Logical Device Enable. */ -#define IT8671F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend. */ - -#define IT8671F_CONFIGURATION_PORT 0x0279 /* Write-only. */ - -/* - * Special values used for entering MB PnP mode. The first four bytes of - * each line determine the address port, the last four are data. - */ -static const u8 init_values[] = { - 0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe, - 0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61, - 0xb0, 0x58, 0x2c, 0x16, /**/ 0x8b, 0x45, 0xa2, 0xd1, - 0xe8, 0x74, 0x3a, 0x9d, /**/ 0xce, 0xe7, 0x73, 0x39, -}; - -static void it8671f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8671F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -/* Enter the configuration state (MB PnP mode). */ -static void it8671f_enter_conf(void) -{ - int i; - - /* Perform MB PnP setup to put the SIO chip at 0x3f0. */ - /* Base address 0x3f0: 0x86 0x80 0x55 0x55. */ - /* Base address 0x3bd: 0x86 0x80 0x55 0xaa. */ - /* Base address 0x370: 0x86 0x80 0xaa 0x55. */ - outb(0x86, IT8671F_CONFIGURATION_PORT); - outb(0x80, IT8671F_CONFIGURATION_PORT); - outb(0x55, IT8671F_CONFIGURATION_PORT); - outb(0x55, IT8671F_CONFIGURATION_PORT); - - /* Sequentially write the 32 special values. */ - for (i = 0; i < 32; i++) - outb(init_values[i], SIO_BASE); -} - -/* Exit the configuration state (MB PnP mode). */ -static void it8671f_exit_conf(void) -{ - it8671f_sio_write(0x00, IT8671F_CONFIG_REG_CC, 0x02); -} - -/* Select 48MHz CLKIN (24MHz is the default). */ -void it8671f_48mhz_clkin(void) -{ - it8671f_enter_conf(); - it8671f_sio_write(0x00, IT8671F_CONFIG_REG_SWSUSP, (1 << 6)); - it8671f_exit_conf(); -} - -/* Enable the serial port(s). */ -static void it8671f_enable_serial(device_t dev, u16 iobase) -{ - it8671f_enter_conf(); - - /* - * Allow all devices to be enabled. Bits: FDC (0), Com1 (1), Com2 (2), - * PP (3), Reserved (4), KBCK (5), KBCM (6), Reserved (7). - */ - it8671f_sio_write(0x00, IT8671F_CONFIG_REG_LDE, 0x6f); - - /* Enable serial port(s). */ - it8671f_sio_write(IT8671F_SP1, 0x30, 0x01); /* Serial port 1 */ - it8671f_sio_write(IT8671F_SP2, 0x30, 0x01); /* Serial port 2 */ - - it8671f_exit_conf(); -} diff --git a/src/superio/ite/it8673f/early_serial.c b/src/superio/ite/it8673f/early_serial.c deleted file mode 100644 index 987b5e6..0000000 --- a/src/superio/ite/it8673f/early_serial.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8673f.h" - -/* The base address is 0x3f0, 0x3bd, or 0x370, depending on config bytes. */ -#define SIO_BASE 0x3f0 -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8673F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8673F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8673F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8673F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend. */ - -#define IT8673F_CONFIGURATION_PORT 0x0279 /* Write-only. */ - -/* - * Special values used for entering MB PnP mode. The first four bytes of - * each line determine the address port, the last four are data. - */ -static const u8 init_values[] = { - 0x6a, 0xb5, 0xda, 0xed, /**/ 0xf6, 0xfb, 0x7d, 0xbe, - 0xdf, 0x6f, 0x37, 0x1b, /**/ 0x0d, 0x86, 0xc3, 0x61, - 0xb0, 0x58, 0x2c, 0x16, /**/ 0x8b, 0x45, 0xa2, 0xd1, - 0xe8, 0x74, 0x3a, 0x9d, /**/ 0xce, 0xe7, 0x73, 0x39, -}; - -static void it8673f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8673F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -/* Enable the serial port(s). */ -static void it8673f_enable_serial(device_t dev, u16 iobase) -{ - int i; - - /* (1) Enter the configuration state (MB PnP mode). */ - - /* Perform MB PnP setup to put the SIO chip at 0x3f0. */ - /* Base address 0x3f0: 0x86 0x80 0x55 0x55. */ - /* Base address 0x3bd: 0x86 0x80 0x55 0xaa. */ - /* Base address 0x370: 0x86 0x80 0xaa 0x55. */ - outb(0x86, IT8673F_CONFIGURATION_PORT); - outb(0x80, IT8673F_CONFIGURATION_PORT); - outb(0x55, IT8673F_CONFIGURATION_PORT); - outb(0x55, IT8673F_CONFIGURATION_PORT); - - /* Sequentially write the 32 special values. */ - for (i = 0; i < 32; i++) - outb(init_values[i], SIO_BASE); - - /* (2) Modify the data of configuration registers. */ - - /* Enable all devices. */ - it8673f_sio_write(IT8673F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8673f_sio_write(IT8673F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Select 24MHz CLKIN (clear bit 0). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_CLOCKSEL, 0x00); - - /* Clear software suspend mode (clear bit 0). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_SWSUSP, 0x00); - - /* (3) Exit the configuration state (MB PnP mode). */ - it8673f_sio_write(0x00, IT8673F_CONFIG_REG_CC, 0x02); -} diff --git a/src/superio/ite/it8705f/early_serial.c b/src/superio/ite/it8705f/early_serial.c deleted file mode 100644 index ccc92c2..0000000 --- a/src/superio/ite/it8705f/early_serial.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8705f.h" - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8705F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8705F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8705F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ - -/* WTF? 0x23 and 0x24 are swapped here (when compared to other IT87xx). */ -#define IT8705F_CONFIG_REG_CLOCKSEL 0x24 /* Clock Selection, Flash I/F. */ -#define IT8705F_CONFIG_REG_SWSUSP 0x23 /* Software Suspend. */ - -#define IT8705F_CONFIGURATION_PORT 0x2e /* Write-only. */ - -static void it8705f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8705F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -/* Enable the serial port(s). */ -static void it8705f_enable_serial(device_t dev, u16 iobase) -{ - /* (1) Enter the configuration state (MB PnP mode). */ - - /* Perform MB PnP setup to put the SIO chip at 0x2e. */ - /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ - /* Base address 0x4e: 0x87 0x01 0x55 0xaa. */ - outb(0x87, IT8705F_CONFIGURATION_PORT); - outb(0x01, IT8705F_CONFIGURATION_PORT); - outb(0x55, IT8705F_CONFIGURATION_PORT); - outb(0x55, IT8705F_CONFIGURATION_PORT); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8705f_sio_write(IT8705F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8705f_sio_write(IT8705F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Select 24MHz CLKIN (set bit 0). */ - it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CLOCKSEL, 0x01); - - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8705f_sio_write(0x00, IT8705F_CONFIG_REG_SWSUSP, 0x00); */ - - /* (3) Exit the configuration state (MB PnP mode). */ - it8705f_sio_write(0x00, IT8705F_CONFIG_REG_CC, 0x02); -} diff --git a/src/superio/ite/it8712f/early_serial.c b/src/superio/ite/it8712f/early_serial.c deleted file mode 100644 index 51564fc..0000000 --- a/src/superio/ite/it8712f/early_serial.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8712f.h" - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ -#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ -#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */ -#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */ - -static void it8712f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8712F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -static void it8712f_enter_conf(void) -{ - u16 port = 0x2e; /* TODO: Don't hardcode! */ - - outb(0x87, port); - outb(0x01, port); - outb(0x55, port); - outb((port == 0x4e) ? 0xaa : 0x55, port); -} - -static void it8712f_exit_conf(void) -{ - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); -} - -/* Select 24MHz CLKIN (48MHz is the default). */ -void it8712f_24mhz_clkin(void) -{ - it8712f_enter_conf(); - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x1); - it8712f_exit_conf(); -} - -/* - * We need to set enable 3VSBSW#, this was documented only in IT8712F_V0.9.2! - * - * LDN 7, reg 0x2a - needed for S3, or memory power will be cut off. - * - * Enable 3VSBSW#. (For System Suspend-to-RAM) - * 0: 3VSBSW# will be always inactive. - * 1: 3VSBSW# enabled. It will be (NOT SUSB#) NAND SUSC#. - */ -void it8712f_enable_3vsbsw(void) -{ - it8712f_enter_conf(); - it8712f_sio_write(IT8712F_GPIO, IT8712F_CONFIG_REG_MFC, 0x80); - it8712f_exit_conf(); -} - -void it8712f_kill_watchdog(void) -{ - it8712f_enter_conf(); - it8712f_sio_write(IT8712F_GPIO, IT8712F_CONFIG_REG_WATCHDOG, 0x00); - it8712f_exit_conf(); -} - -/* Enable the serial port(s). */ -void it8712f_enable_serial(device_t dev, u16 iobase) -{ - /* (1) Enter the configuration state (MB PnP mode). */ - it8712f_enter_conf(); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - - /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8712f_sio_write(IT8712F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8712f_sio_write(IT8712F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_SWSUSP, 0x00); */ - - /* (3) Exit the configuration state (MB PnP mode). */ - it8712f_exit_conf(); -} diff --git a/src/superio/ite/it8716f/early_init.c b/src/superio/ite/it8716f/early_init.c deleted file mode 100644 index cfac2a9..0000000 --- a/src/superio/ite/it8716f/early_init.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghai.lu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8716f.h" - -void it8716f_disable_dev(device_t dev) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); -} - -void it8716f_enable_dev(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/ite/it8716f/early_serial.c b/src/superio/ite/it8716f/early_serial.c deleted file mode 100644 index 02f0304..0000000 --- a/src/superio/ite/it8716f/early_serial.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghai.lu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8716f.h" - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8716F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8716F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8716F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ -#define IT8716F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8716F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - - outb(0x87, port); - outb(0x01, port); - outb(0x55, port); - outb((port == 0x4e) ? 0xaa : 0x55, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - pnp_write_config(dev, IT8716F_CONFIG_REG_CC, 0x02); -} - -void it8716f_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/ite/it8718f/early_serial.c b/src/superio/ite/it8718f/early_serial.c deleted file mode 100644 index 308b67c..0000000 --- a/src/superio/ite/it8718f/early_serial.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8718f.h" - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8718F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8718F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8718F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */ -#define IT8718F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8718F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ - -static void it8718f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8718F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -static void it8718f_enter_conf(void) -{ - u16 port = 0x2e; /* TODO: Don't hardcode! */ - - outb(0x87, port); - outb(0x01, port); - outb(0x55, port); - outb((port == 0x4e) ? 0xaa : 0x55, port); -} - -static void it8718f_exit_conf(void) -{ - it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CC, 0x02); -} - -/* Select 24MHz CLKIN (48MHz default). */ -void it8718f_24mhz_clkin(void) -{ - it8718f_enter_conf(); - it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CLOCKSEL, 0x1); - it8718f_exit_conf(); -} - -/* - * GIGABYTE uses a special Super I/O register to protect its Dual BIOS - * mechanism. It lives in the GPIO LDN. However, register 0xEF is not - * mentioned in the IT8718F datasheet so just hardcode it to 0x7E for now. - */ -void it8718f_disable_reboot(void) -{ - it8718f_enter_conf(); - it8718f_sio_write(IT8718F_GPIO, 0xEF, 0x7E); - it8718f_exit_conf(); -} - -/* Enable the serial port(s). */ -void it8718f_enable_serial(device_t dev, u16 iobase) -{ - /* (1) Enter the configuration state (MB PnP mode). */ - it8718f_enter_conf(); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8718f_sio_write(IT8718F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8718f_sio_write(IT8718F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ - - /* (3) Exit the configuration state (MB PnP mode). */ - it8718f_exit_conf(); -} diff --git a/src/superio/ite/it8721f/early_serial.c b/src/superio/ite/it8721f/early_serial.c deleted file mode 100644 index 20e19b6..0000000 --- a/src/superio/ite/it8721f/early_serial.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * Copyright (C) 2011 QingPei Wang wangqingpei@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "it8721f.h" - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8721F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8721F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8721F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8721F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ - -static void it8721f_sio_write(u8 ldn, u8 index, u8 value) -{ - outb(IT8721F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -static void it8721f_enter_conf(void) -{ - u16 port = 0x2e; /* TODO: Don't hardcode! */ - - outb(0x87, port); - outb(0x01, port); - outb(0x55, port); - outb((port == 0x4e) ? 0xaa : 0x55, port); -} - -static void it8721f_exit_conf(void) -{ - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CC, 0x02); -} - -/* Select 24MHz CLKIN (48MHz default). */ -void it8721f_24mhz_clkin(void) -{ - it8721f_enter_conf(); - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CLOCKSEL, 0x1); - it8721f_exit_conf(); -} - - -/* Enable the serial port(s). */ -void it8721f_enable_serial(device_t dev, u16 iobase) -{ - /* (1) Enter the configuration state (MB PnP mode). */ - it8721f_enter_conf(); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8721f_sio_write(IT8721F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8721f_sio_write(IT8721F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ - - /* (3) Exit the configuration state (MB PnP mode). */ - it8721f_exit_conf(); -} diff --git a/src/superio/ite/it8772f/early_serial.c b/src/superio/ite/it8772f/early_serial.c deleted file mode 100644 index 8bf2964..0000000 --- a/src/superio/ite/it8772f/early_serial.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <device/pnp_def.h> -#include "it8772f.h" - -/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE IT8772F_BASE -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define IT8772F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ -#define IT8772F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define IT8772F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ -#define IT8772F_CONFIG_REG_MFC 0x2a /* Multi-function control */ -#define IT8772F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */ - -u8 it8772f_sio_read(u8 index) -{ - outb(index, SIO_BASE); - return inb(SIO_DATA); -} - -void it8772f_sio_write(u8 index, u8 value) -{ - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -static void it8772f_enter_conf(void) -{ - u16 port = SIO_BASE; - - outb(0x87, port); - outb(0x01, port); - outb(0x55, port); - outb((port == 0x4e) ? 0xaa : 0x55, port); -} - -static void it8772f_exit_conf(void) -{ - it8772f_sio_write(IT8772F_CONFIG_REG_CC, 0x02); -} - -/* Select 24MHz CLKIN (48MHz is the default). */ -void it8772f_24mhz_clkin(void) -{ - it8772f_enter_conf(); - it8772f_sio_write(IT8772F_CONFIG_REG_LDN, 0x00); - it8772f_sio_write(IT8772F_CONFIG_REG_CLOCKSEL, 0x1); - it8772f_exit_conf(); -} - -/* - * LDN 7, reg 0x2a - needed for S3, or memory power will be cut off. - * - * Enable 3VSBSW#. (For System Suspend-to-RAM) - * 0: 3VSBSW# will be always inactive. - * 1: 3VSBSW# enabled. It will be (NOT SUSB#) NAND SUSC#. - */ -void it8772f_enable_3vsbsw(void) -{ - it8772f_enter_conf(); - it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); - it8772f_sio_write(IT8772F_CONFIG_REG_MFC, 0x80); - it8772f_exit_conf(); -} - -void it8772f_kill_watchdog(void) -{ - it8772f_enter_conf(); - it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); - it8772f_sio_write(IT8772F_CONFIG_REG_WATCHDOG, 0x00); - it8772f_exit_conf(); -} - -/* Enable the serial port(s). */ -void it8772f_enable_serial(device_t dev, u16 iobase) -{ - it8772f_enter_conf(); - it8772f_sio_write(IT8772F_CONFIG_REG_LDN, dev & 0xff); - it8772f_sio_write(PNP_IDX_IO0, (iobase >> 8) & 0xff); - it8772f_sio_write(PNP_IDX_IO0+1, iobase & 0xff); - it8772f_sio_write(PNP_IDX_EN, 1); - it8772f_exit_conf(); -} - -/* Set AC resume to be up to the Southbridge */ -void it8772f_ac_resume_southbridge(void) -{ - it8772f_enter_conf(); - it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_EC); - it8772f_sio_write(0xf4, 0x60); - it8772f_exit_conf(); -} - -/* Configure a set of GPIOs */ -void it8772f_gpio_setup(int set, u8 select, u8 polarity, u8 pullup, - u8 output, u8 enable) -{ - set--; /* Set 1 is offset 0 */ - it8772f_enter_conf(); - it8772f_sio_write(IT8772F_CONFIG_REG_LDN, IT8772F_GPIO); - if (set < 5) { - it8772f_sio_write(GPIO_REG_SELECT(set), select); - it8772f_sio_write(GPIO_REG_ENABLE(set), enable); - it8772f_sio_write(GPIO_REG_POLARITY(set), polarity); - } - it8772f_sio_write(GPIO_REG_OUTPUT(set), output); - it8772f_sio_write(GPIO_REG_PULLUP(set), pullup); - it8772f_exit_conf(); -} diff --git a/src/superio/nsc/pc8374/early_init.c b/src/superio/nsc/pc8374/early_init.c deleted file mode 100644 index d3f601d..0000000 --- a/src/superio/nsc/pc8374/early_init.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc8374.h" - -static void pc8374_enable(u16 iobase, u8 *init) -{ - u8 val, count; - - outb(0x29, iobase); - val = inb(iobase + 1); - val |= 0x91; - outb(val, iobase + 1); - - for (count = 0; count < 255; count++) - if (inb(iobase + 1) == 0x91) - break; - - for (; *init; init++) { - outb(*init, iobase); - val = inb(iobase + 1); - init++; - val &= *init; - init++; - val |= *init; - outb(val, iobase + 1); - } -} - -static void pc8374_enable_dev(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - if (iobase) - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87309/early_serial.c b/src/superio/nsc/pc87309/early_serial.c deleted file mode 100644 index 131f0aa..0000000 --- a/src/superio/nsc/pc87309/early_serial.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87309.h" - -static void pc87309_enable_serial(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87351/early_serial.c b/src/superio/nsc/pc87351/early_serial.c deleted file mode 100644 index c34538f..0000000 --- a/src/superio/nsc/pc87351/early_serial.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87351.h" - -static void pc87351_enable_serial(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87360/early_serial.c b/src/superio/nsc/pc87360/early_serial.c deleted file mode 100644 index da4abdb..0000000 --- a/src/superio/nsc/pc87360/early_serial.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87360.h" - -static void pc87360_enable_serial(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87366/early_serial.c b/src/superio/nsc/pc87366/early_serial.c deleted file mode 100644 index e173afd..0000000 --- a/src/superio/nsc/pc87366/early_serial.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87366.h" - -static void pc87366_enable_serial(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87392/early_serial.c b/src/superio/nsc/pc87392/early_serial.c deleted file mode 100644 index 6e85fb9..0000000 --- a/src/superio/nsc/pc87392/early_serial.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Sven Schnelle svens@stackframe.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87392.h" - -static void pc87392_enable_serial(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87417/early_init.c b/src/superio/nsc/pc87417/early_init.c deleted file mode 100644 index d1870f9..0000000 --- a/src/superio/nsc/pc87417/early_init.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * Copyright (C) 2004 Tyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87417.h" - -static void pc87417_disable_dev(device_t dev) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); -} - -static void pc87417_enable_dev(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} - -static void xbus_cfg(device_t dev) -{ - u8 i, data; - u16 xbus_index; - - pnp_set_logical_device(dev); - /* Select proper BIOS size (4MB). */ - pnp_write_config(dev, PC87417_XMEMCNF2, - (pnp_read_config(dev, PC87417_XMEMCNF2)) | 0x04); - xbus_index = pnp_read_iobase(dev, 0x60); - - /* Enable writes to devices attached to XCS0 (XBUS Chip Select 0). */ - for (i = 0; i <= 0xf; i++) - outb((i << 4), xbus_index + PC87417_HAP0); -} diff --git a/src/superio/nsc/pc87417/early_serial.c b/src/superio/nsc/pc87417/early_serial.c deleted file mode 100644 index 33bae7e..0000000 --- a/src/superio/nsc/pc87417/early_serial.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * Copyright (C) 2004 Tyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87417.h" - -void pc87417_enable_serial(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} - -void pc87417_enable_dev(device_t dev) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nsc/pc87427/early_init.c b/src/superio/nsc/pc87427/early_init.c deleted file mode 100644 index 6df1b9f..0000000 --- a/src/superio/nsc/pc87427/early_init.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc87427.h" - -static void pc87427_disable_dev(device_t dev) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); -} - -static void pc87427_enable_dev(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} - -static void xbus_cfg(device_t dev) -{ - u8 i, data; - u16 xbus_index; - - pnp_set_logical_device(dev); - - /* Select proper BIOS size (4MB). */ - pnp_write_config(dev, PC87427_XMEMCNF2, - (pnp_read_config(dev, PC87427_XMEMCNF2)) | 0x04); - xbus_index = pnp_read_iobase(dev, 0x60); - - /* Enable writes to devices attached to XCS0 (XBUS Chip Select 0). */ - for (i = 0; i <= 0xf; i++) - outb((i << 4), xbus_index + PC87427_HAP0); -} diff --git a/src/superio/nsc/pc97317/early_serial.c b/src/superio/nsc/pc97317/early_serial.c deleted file mode 100644 index 0c21561..0000000 --- a/src/superio/nsc/pc97317/early_serial.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "pc97317.h" - -#define PM_DEV PNP_DEV(0x2e, PC97317_PM) -#define PM_BASE 0xe8 - -/* The PC97317 needs clocks to be set up before the serial port will operate. */ -static void pc97317_enable_serial(device_t dev, u16 iobase) -{ - /* Set base address of power management unit. */ - pnp_set_logical_device(PM_DEV); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, PM_BASE); - pnp_set_enable(dev, 1); - - /* Use on-chip clock multiplier. */ - outb(0x03, PM_BASE); - outb(inb(PM_BASE + 1) | 0x07, PM_BASE + 1); - - /* Wait for the clock to stabilise. */ - while(!(inb(PM_BASE + 1) & 0x80)) - ; - - /* Set the base address of the port. */ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/nuvoton/nct5104d/Makefile.inc b/src/superio/nuvoton/nct5104d/Makefile.inc index b9345aa..9947f50 100644 --- a/src/superio/nuvoton/nct5104d/Makefile.inc +++ b/src/superio/nuvoton/nct5104d/Makefile.inc @@ -18,6 +18,5 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
-romstage-$(CONFIG_SUPERIO_NUVOTON_NCT5104D) += early_init.c ramstage-$(CONFIG_SUPERIO_NUVOTON_NCT5104D) += superio.c
diff --git a/src/superio/nuvoton/nct5104d/early_init.c b/src/superio/nuvoton/nct5104d/early_init.c deleted file mode 100644 index 9c0cf0f..0000000 --- a/src/superio/nuvoton/nct5104d/early_init.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <arch/romcc_io.h> -#include <device/pnp_def.h> -#include "nct5104d.h" - -static void pnp_enter_extended_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87,port); - outb(0x87,port); -} - -static void pnp_exit_extended_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa,port); -} - -static void nct5104d_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_extended_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev,0); - pnp_set_iobase(dev,PNP_IDX_IO0, iobase); - pnp_set_enable(dev,1); - pnp_exit_extended_mode(dev); -} diff --git a/src/superio/serverengines/Kconfig b/src/superio/serverengines/Kconfig deleted file mode 100644 index 7c15067..0000000 --- a/src/superio/serverengines/Kconfig +++ /dev/null @@ -1,21 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Ronald G. Minnich -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -config SUPERIO_SERVERENGINES_PILOT - bool diff --git a/src/superio/serverengines/pilot/early_init.c b/src/superio/serverengines/pilot/early_init.c deleted file mode 100644 index 1993c9e..0000000 --- a/src/superio/serverengines/pilot/early_init.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for Univ. Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* PILOT Super I/O is only based on LPC observation done on factory system. */ - -#define BLUBB_DEV PNP_DEV(port, 0x04) - -/* - * Logical device 4, 5 and 7 are being deactivated. Logical Device 1 seems to - * be another serial (?), it is also deactivated on the HP machine. - */ -static void pilot_early_init(device_t dev) -{ - u16 port = dev >> 8; - - print_debug("Using port: "); - print_debug_hex16(port); - print_debug("\n"); - pilot_disable_serial(PNP_DEV(port, 0x1)); - print_debug("disable serial 1\n"); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x3)); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, 0x60, 0x0b00); - pnp_set_iobase(dev, 0x62, 0x0b80); - pnp_set_iobase(dev, 0x64, 0x0b84); - pnp_set_iobase(dev, 0x66, 0x0b86); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); - -/* - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x3)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable(PNP_DEV(port, 0x3), 0); - pnp_exit_ext_func_mode(dev); -*/ - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x4)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable( PNP_DEV(port, 0x4), 0); - pnp_exit_ext_func_mode(dev); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x5)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable(PNP_DEV(port, 0x5), 0); - pnp_exit_ext_func_mode(dev); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x6)); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x60); - pnp_set_iobase(dev, PNP_IDX_IO1, 0x64); - pnp_set_irq(dev, PNP_IDX_IRQ0, 1); - pnp_set_drq(dev, 0x71, 3); - pnp_set_enable(dev, 0); - pnp_exit_ext_func_mode(dev); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0xe)); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x70); - pnp_set_iobase(dev, PNP_IDX_IO1, 0x72); - pnp_set_irq(dev, PNP_IDX_IRQ0, 8); - pnp_set_drq(dev, 0x71, 3); - pnp_set_enable(dev, 0); - pnp_exit_ext_func_mode(dev); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x7)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable(PNP_DEV(port, 0x7), 0); - pnp_exit_ext_func_mode(dev); - -/* - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x8)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable(PNP_DEV(port, 0x8), 0); - pnp_exit_ext_func_mode(dev); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x9)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable(PNP_DEV(port, 0x9), 0); - pnp_exit_ext_func_mode(dev); - - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(PNP_DEV(port, 0x10)); - pnp_exit_ext_func_mode(dev); - pnp_enter_ext_func_mode(dev); - pnp_set_enable(PNP_DEV(port, 0x10), 0); - pnp_exit_ext_func_mode(dev); -*/ -} diff --git a/src/superio/serverengines/pilot/early_serial.c b/src/superio/serverengines/pilot/early_serial.c deleted file mode 100644 index 4112901..0000000 --- a/src/superio/serverengines/pilot/early_serial.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for Univ. Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* PILOT Super I/O is only based on LPC observation done on factory system. */ - -#include <arch/io.h> -#include "pilot.h" - -/* Pilot uses 0x5A/0xA5 pattern to actiavte deactivate config access. */ -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x5A, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xA5, port); -} - -/* Serial config is a fairly standard procedure. */ -static void __attribute__((unused)) pilot_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} - -static void __attribute__((unused)) pilot_disable_serial(device_t dev) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_iobase(dev, PNP_IDX_IO0, 0x0000); - pnp_set_enable(dev, 0); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/serverengines/pilot/pilot.h b/src/superio/serverengines/pilot/pilot.h deleted file mode 100644 index a5bddd3..0000000 --- a/src/superio/serverengines/pilot/pilot.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 University of Heidelberg - * Written by Mondrian Nuessle nuessle@uni-heidelberg.de for Univ. Heidelberg - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef SUPERIO_SERVERENGINES_PILOT_PILOT_H -#define SUPERIO_SERVERENGINES_PILOT_PILOT_H - -/* PILOT Super I/O is only based on LPC observation done on factory system. */ - -#define PILOT_LD1 0x01 /* Logical device 1 */ -#define PILOT_SP1 0x02 /* Com1 */ -#define PILOT_LD4 0x04 /* Logical device 4 */ -#define PILOT_LD5 0x05 /* Logical device 5 */ -#define PILOT_LD7 0x07 /* Logical device 7 */ - -#endif diff --git a/src/superio/smsc/fdc37m60x/early_serial.c b/src/superio/smsc/fdc37m60x/early_serial.c deleted file mode 100644 index 38cb0f8..0000000 --- a/src/superio/smsc/fdc37m60x/early_serial.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "fdc37m60x.h" - -/* The base address is 0x3f0 or 0x370, depending on the SYSOPT pin. */ -#define SIO_BASE 0x3f0 -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - -/* Global configuration registers. */ -#define FDC37M60X_CONFIG_REG_CC 0x02 /* Configure Control. */ -#define FDC37M60X_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ -#define FDC37M60X_CONFIG_POWER_CONTROL 0x22 /* Power Control. */ -#define FDC37M60X_CONFIG_POWER_MGMT 0x23 /* Intelligent Power Mgmt. */ -#define FDC37M60X_CONFIG_OSC 0x24 /* OSC. */ - -#define FDC37M60X_CONFIGURATION_PORT 0x3f0 /* Write-only. */ - -/* The content of FDC37M60X_CONFIG_REG_LDN (index 0x07) must be set to the - LDN the register belongs to, before you can access the register. */ -static void fdc37m60x_sio_write(uint8_t ldn, u8 index, u8 value) -{ - outb(FDC37M60X_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); -} - -/* Enable the peripheral devices on the FDC37M60X Super I/O chip. */ -static void fdc37m60x_enable_serial(device_t dev, u16 iobase) -{ - /* (1) Enter the configuration state. */ - outb(0x55, FDC37M60X_CONFIGURATION_PORT); - - /* (2) Modify the data of configuration registers. */ - - /* Power on all devices by setting the respective bit. - Bits: 0 (FDC), 3 (PP), 4 (Com1), 5 (Com2). The rest is reserved. */ - fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_POWER_CONTROL, 0x39); - - /* Disable intelligent power management. */ - fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_POWER_MGMT, 0x00); - - /* Turn on OSC, turn on BRG clock. */ - fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_OSC, 0x04); - - /* Configure serial port 1. */ - fdc37m60x_sio_write(FDC37M60X_SP1, 0x60, 0x03); - fdc37m60x_sio_write(FDC37M60X_SP1, 0x61, 0xf8); /* I/O 0x3f8 */ - fdc37m60x_sio_write(FDC37M60X_SP1, 0x70, 0x04); /* IRQ 4 */ - fdc37m60x_sio_write(FDC37M60X_SP1, 0xf0, 0x00); /* Normal */ - - /* Enable serial port 1. */ - fdc37m60x_sio_write(FDC37M60X_SP1, 0x30, 0x01); - - /* (3) Exit the configuration state. */ - outb(0xaa, FDC37M60X_CONFIGURATION_PORT); -} diff --git a/src/superio/smsc/lpc47b272/early_serial.c b/src/superio/smsc/lpc47b272/early_serial.c deleted file mode 100644 index b2f0d1b..0000000 --- a/src/superio/smsc/lpc47b272/early_serial.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Digital Design Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for SMSC LPC47B272 Super I/O chip. */ - -#include <arch/io.h> -#include "lpc47b272.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/** - * Configure the base I/O port of the specified serial device and enable the - * serial device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Processor I/O port address to assign to this serial device. - */ -static void lpc47b272_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/lpc47b397/early_serial.c b/src/superio/smsc/lpc47b397/early_serial.c deleted file mode 100644 index 31d515b..0000000 --- a/src/superio/smsc/lpc47b397/early_serial.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * Copyright (C) 2004 Tyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "lpc47b397.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void lpc47b397_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/lpc47m10x/early_serial.c b/src/superio/smsc/lpc47m10x/early_serial.c deleted file mode 100644 index fc6efb9..0000000 --- a/src/superio/smsc/lpc47m10x/early_serial.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Digital Design Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "lpc47m10x.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/** - * Configure the base I/O port of the specified serial device and enable the - * serial device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Processor I/O port address to assign to this serial device. - */ -static void lpc47m10x_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/lpc47m15x/early_serial.c b/src/superio/smsc/lpc47m15x/early_serial.c deleted file mode 100644 index 7d75bae..0000000 --- a/src/superio/smsc/lpc47m15x/early_serial.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for the SMSC LPC47M15X Super I/O chip */ - -#include <arch/io.h> -#include "lpc47m15x.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static inline void lpc47m15x_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_conf_state(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/lpc47n207/early_serial.c b/src/superio/smsc/lpc47n207/early_serial.c deleted file mode 100644 index e2ae49d..0000000 --- a/src/superio/smsc/lpc47n207/early_serial.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* - * This code tries to discover the SMSC LPC47N207 superio chip which can be - * connected over an LPC dongle. The chip could be bootstrap mapped to one of - * four LPC addresses: 0x2e, 0x4e, 0x162e, and 0x164e. - * - * Initializing the UART requires accesses to a few control registers. This - * structure includes the register offset and the value to write (along with - * the mask). - */ -typedef struct { - u8 conf_reg; - u8 value; - u8 mask; -} uart_conf; - -/* All regs/values to write to initialize the LPC47N207 UART */ -static const uart_conf uart_conf_data [] = { - {2, (1 << 3), (1 << 3)}, /* cr02, enable Primary UART power */ - {0xc, (1 << 6), (1 << 6)}, /* cr0c, enable Primary UART high speed */ - {0x24, (CONFIG_TTYS0_BASE >> 3) << 1, 0xff}, /* cr24, base addr */ -}; - -void try_enabling_LPC47N207_uart(void) -{ - u8 reg_value; - const uart_conf* conf_item; - u16 lpc_ports[] = {0x2e, 0x4e, 0x162e, 0x164e}; - u16 lpc_port; - int i, j; - -#define CONFIG_ENABLE 0x55 -#define CONFIG_DISABLE 0xaa - - for (j = 0; j < ARRAY_SIZE(lpc_ports); j++) { - lpc_port = lpc_ports[j]; - - /* enable CONFIG mode */ - outb(CONFIG_ENABLE, lpc_port); - reg_value=inb(lpc_port); - if (reg_value != CONFIG_ENABLE) { - continue; /* There is no LPC device at this address */ - } - - do { - /* - * Registers 12 and 13 hold config address, look for a - * match. - */ - outb(0x12, lpc_port); - reg_value=inb(lpc_port + 1); - if (reg_value != (lpc_port & 0xff)) - break; - - outb(0x13, lpc_port); - reg_value=inb(lpc_port + 1); - if (reg_value != (lpc_port >> 8)) - break; - - /* This must be the SMSC LPC 47N207, enable the UART. */ - for (i = 0; i < ARRAY_SIZE(uart_conf_data); i++) { - u8 reg, value, mask; - - conf_item = uart_conf_data + i; - - reg = conf_item->conf_reg; - value = conf_item->value; - mask = conf_item->mask; - - outb(reg, lpc_port); - reg_value = inb(lpc_port + 1); - reg_value &= ~mask; - reg_value |= (value & mask); - outb(reg_value, lpc_port + 1); - } - } while (0); - outb(CONFIG_DISABLE, lpc_port); - } -} diff --git a/src/superio/smsc/lpc47n217/early_serial.c b/src/superio/smsc/lpc47n217/early_serial.c deleted file mode 100644 index 451628a..0000000 --- a/src/superio/smsc/lpc47n217/early_serial.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Digital Design Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for SMSC LPC47N217 Super I/O chip. */ - -#include <arch/io.h> -#include <assert.h> -#include "lpc47n217.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/** - * Program the base I/O port for the specified logical device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Base I/O port for the logical device. - */ -static void lpc47n217_pnp_set_iobase(device_t dev, u16 iobase) -{ - /* LPC47N217 requires base ports to be a multiple of 4. */ - ASSERT(!(iobase & 0x3)); - - switch(dev & 0xFF) { - case LPC47N217_PP: - pnp_write_config(dev, 0x23, (iobase >> 2) & 0xff); - break; - case LPC47N217_SP1: - pnp_write_config(dev, 0x24, (iobase >> 2) & 0xff); - break; - case LPC47N217_SP2: - pnp_write_config(dev, 0x25, (iobase >> 2) & 0xff); - break; - default: - break; - } -} - -/** - * Enable or disable the specified logical device. - * - * Technically, a full disable requires setting the device's base I/O port - * below 0x100. We don't do that here, because we don't have access to a data - * structure that specifies what the 'real' base port is (when asked to enable - * the device). Also the function is used only to disable the device while its - * true base port is programmed (see lpc47n217_enable_serial() below). - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param enable 0 to disable, anythig else to enable. - */ -static void lpc47n217_pnp_set_enable(device_t dev, int enable) -{ - u8 power_register = 0, power_mask = 0, current_power, new_power; - - switch(dev & 0xFF) { - case LPC47N217_PP: - power_register = 0x01; - power_mask = 0x04; - break; - case LPC47N217_SP1: - power_register = 0x02; - power_mask = 0x08; - break; - case LPC47N217_SP2: - power_register = 0x02; - power_mask = 0x80; - break; - default: - return; - } - - current_power = pnp_read_config(dev, power_register); - new_power = current_power & ~power_mask; /* Disable by default. */ - if (enable) - new_power |= power_mask; /* Enable. */ - pnp_write_config(dev, power_register, new_power); -} - -/** - * Configure the base I/O port of the specified serial device and enable the - * serial device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Processor I/O port address to assign to this serial device. - */ -static void lpc47n217_enable_serial(device_t dev, u16 iobase) -{ - /* - * NOTE: Cannot use pnp_set_XXX() here because they assume chip - * support for logical devices, which the LPC47N217 doesn't have. - */ - pnp_enter_conf_state(dev); - lpc47n217_pnp_set_enable(dev, 0); - lpc47n217_pnp_set_iobase(dev, iobase); - lpc47n217_pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/lpc47n227/early_serial.c b/src/superio/smsc/lpc47n227/early_serial.c deleted file mode 100644 index 4aea7c5..0000000 --- a/src/superio/smsc/lpc47n227/early_serial.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2005 Digital Design Corporation - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Pre-RAM driver for SMSC LPC47N227 Super I/O chip. */ - -#include <arch/io.h> -#include "lpc47n227.h" - -static void pnp_enter_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0x55, port); -} - -static void pnp_exit_conf_state(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/** - * Program the base I/O port for the specified logical device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Base I/O port for the logical device. - */ -static void lpc47n227_pnp_set_iobase(device_t dev, u16 iobase) -{ - /* LPC47N227 requires base ports to be a multiple of 4. */ - /* it's not very useful to do an ASSERT here: if it trips, - * there's no console to report it. - ASSERT(!(iobase & 0x3)); - */ - - switch (dev & 0xFF) { - case LPC47N227_PP: - pnp_write_config(dev, 0x23, (iobase >> 2) & 0xff); - break; - case LPC47N227_SP1: - pnp_write_config(dev, 0x24, (iobase >> 2) & 0xff); - break; - case LPC47N227_SP2: - pnp_write_config(dev, 0x25, (iobase >> 2) & 0xff); - break; - default: - break; - } -} - -/** - * Enable or disable the specified logical device. - * - * Technically, a full disable requires setting the device's base I/O port - * below 0x100. We don't do that here, because we don't have access to a data - * structure that specifies what the 'real' base port is (when asked to enable - * the device). Also the function is used only to disable the device while its - * true base port is programmed (see lpc47n227_enable_serial() below). - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param enable 0 to disable, anythig else to enable. - */ -static void lpc47n227_pnp_set_enable(device_t dev, int enable) -{ - u8 power_register = 0, power_mask = 0, current_power, new_power; - - switch (dev & 0xFF) { - case LPC47N227_PP: - power_register = 0x01; - power_mask = 0x04; - break; - case LPC47N227_SP1: - power_register = 0x02; - power_mask = 0x08; - break; - case LPC47N227_SP2: - power_register = 0x02; - power_mask = 0x80; - break; - default: - return; - } - - current_power = pnp_read_config(dev, power_register); - new_power = current_power & ~power_mask; /* Disable by default. */ - if (enable) - new_power |= power_mask; /* Enable. */ - pnp_write_config(dev, power_register, new_power); -} - -/** - * Configure the base I/O port of the specified serial device and enable the - * serial device. - * - * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. - * @param iobase Processor I/O port address to assign to this serial device. - */ -static void lpc47n227_enable_serial(device_t dev, u16 iobase) -{ - /* - * NOTE: Cannot use pnp_set_XXX() here because they assume chip - * support for logical devices, which the LPC47N227 doesn't have. - */ - pnp_enter_conf_state(dev); - lpc47n227_pnp_set_enable(dev, 0); - lpc47n227_pnp_set_iobase(dev, iobase); - lpc47n227_pnp_set_enable(dev, 1); - pnp_exit_conf_state(dev); -} diff --git a/src/superio/smsc/smscsuperio/early_serial.c b/src/superio/smsc/smscsuperio/early_serial.c deleted file mode 100644 index 5e9aadb..0000000 --- a/src/superio/smsc/smscsuperio/early_serial.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include <device/pnp_def.h> - -/* All known/supported SMSC Super I/Os have the same logical device IDs - * for the serial ports (COM1, COM2). - */ -#define SMSCSUPERIO_SP1 4 /* Com1 */ -#define SMSCSUPERIO_SP2 5 /* Com2 */ - -/** - * Enable the specified serial port. - * - * @param dev The device to use. - * @param iobase The I/O base of the serial port (usually 0x3f8/0x2f8). - */ -static inline void smscsuperio_enable_serial(device_t dev, u16 iobase) -{ - u16 port = dev >> 8; - - outb(0x55, port); /* Enter the configuration state. */ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - outb(0xaa, port); /* Exit the configuration state. */ -} diff --git a/src/superio/winbond/w83627ehg/early_init.c b/src/superio/winbond/w83627ehg/early_init.c deleted file mode 100644 index 7be5e37..0000000 --- a/src/superio/winbond/w83627ehg/early_init.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghai.lu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <arch/io.h> -#include "w83627ehg.h" - -void w83627ehg_disable_dev(device_t dev) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); -} - -void w83627ehg_enable_dev(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/winbond/w83627ehg/early_serial.c b/src/superio/winbond/w83627ehg/early_serial.c deleted file mode 100644 index 1a895c6..0000000 --- a/src/superio/winbond/w83627ehg/early_serial.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu yinghai.lu@amd.com for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83627ehg.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -void w83627ehg_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/winbond/w83627hf/early_init.c b/src/superio/winbond/w83627hf/early_init.c deleted file mode 100644 index 66b4098..0000000 --- a/src/superio/winbond/w83627hf/early_init.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright 2003-2004 Linux Networx - * Copyright 2004 Tyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83627hf.h" - -void w83627hf_disable_dev(device_t dev) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); -} - -void w83627hf_enable_dev(device_t dev, u16 iobase) -{ - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); -} diff --git a/src/superio/winbond/w83627hf/early_serial.c b/src/superio/winbond/w83627hf/early_serial.c deleted file mode 100644 index db2827b..0000000 --- a/src/superio/winbond/w83627hf/early_serial.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * Copyright (C) 2004 Tyan - * Copyright (C) 2010 Win Enterprises (anishp@win-ent.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83627hf.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -void w83627hf_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} - -void w83627hf_set_clksel_48(device_t dev) -{ - u8 reg8; - - pnp_enter_ext_func_mode(dev); - reg8 = pnp_read_config(dev, 0x24); - reg8 |= (1 << 6); /* Set CLKSEL (clock input on pin 1) to 48MHz. */ - pnp_write_config(dev, 0x24, reg8); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/winbond/w83627thg/early_serial.c b/src/superio/winbond/w83627thg/early_serial.c deleted file mode 100644 index 8ba1a30..0000000 --- a/src/superio/winbond/w83627thg/early_serial.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * Copyright (C) 2004 Tyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83627thg.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void inline w83627thg_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} - -#ifndef __ROMCC__ -void w83627thg_set_clksel_48(device_t dev) { - u8 reg8; - pnp_enter_ext_func_mode(dev); - reg8 = pnp_read_config(dev, 0x24); - reg8 |= (1 << 6); /* Set CLKSEL (clock input on pin 1) to 48MHz. */ - pnp_write_config(dev, 0x24, reg8); - pnp_exit_ext_func_mode(dev); -} -#endif diff --git a/src/superio/winbond/w83627uhg/early_serial.c b/src/superio/winbond/w83627uhg/early_serial.c deleted file mode 100644 index bfd08a3..0000000 --- a/src/superio/winbond/w83627uhg/early_serial.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 Dynon Avionics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83627uhg.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -/** Set the input clock to 24 or 48 MHz. */ -static void w83627uhg_set_input_clk_sel(device_t dev, u8 speed_24mhz) -{ - u8 value; - - value = pnp_read_config(dev, 0x24); - value &= ~(1 << 6); - if (!speed_24mhz) - value |= (1 << 6); - pnp_write_config(dev, 0x24, value); -} - -static void w83627uhg_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/winbond/w83697hf/early_serial.c b/src/superio/winbond/w83697hf/early_serial.c deleted file mode 100644 index e435645..0000000 --- a/src/superio/winbond/w83697hf/early_serial.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Sean Nelson snelson@nmt.edu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83697hf.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -void w83697hf_set_clksel_48(device_t dev) -{ - u8 reg8; - - pnp_enter_ext_func_mode(dev); - reg8 = pnp_read_config(dev, 0x24); - reg8 |= (1 << 6); /* Set the clock input to 48MHz. */ - pnp_write_config(dev, 0x24, reg8); - pnp_exit_ext_func_mode(dev); -} - -static void w83697hf_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/winbond/w83977f/early_serial.c b/src/superio/winbond/w83977f/early_serial.c deleted file mode 100644 index c572dcb..0000000 --- a/src/superio/winbond/w83977f/early_serial.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83977f.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void w83977f_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/winbond/w83977tf/early_serial.c b/src/superio/winbond/w83977tf/early_serial.c deleted file mode 100644 index c016515..0000000 --- a/src/superio/winbond/w83977tf/early_serial.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2000 AG Electronics Ltd. - * Copyright (C) 2003-2004 Linux Networx - * Copyright (C) 2004 Tyan - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <arch/io.h> -#include "w83977tf.h" - -static void pnp_enter_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0x87, port); - outb(0x87, port); -} - -static void pnp_exit_ext_func_mode(device_t dev) -{ - u16 port = dev >> 8; - outb(0xaa, port); -} - -static void w83977tf_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -}
-
Alec Ari