[S] Change in coreboot[master]: mb/google/brya/acpi: Remove erroneous _PR0/_PR3

[Tim Wawrzynczak (Code Review)]

Attention is currently required from: Anil Kumar K, Cliff Huang, Subrata Banik, Selma Bensaid.

Hello build bot (Jenkins), Anil Kumar K, Cliff Huang, Subrata Banik, Selma Bensaid,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/67212

to look at the new patch set (#2).

Change subject: mb/google/brya/acpi: Remove erroneous _PR0/_PR3
......................................................................

mb/google/brya/acpi: Remove erroneous _PR0/_PR3

The Linux kernel runtime D3 framework expects a PCIe device to have a
power resource in order to be properly power-manageable. The _PR0/_PR3
values were pointing at the PEG0 Device, which is not a PowerResource,
so this must have confused the RTD3 framework and RTD3 was not
functional. Removing the _PR0/_PR3 fixes the problem.

BUG=b:243888246
TEST=echo auto > /sys/bus/pci/devices/0000:01:00.0/power/control;
sleep 10;
echo on > /sys/bus/pci/devices/0000:01:00.0/power/control
After this there are no longer errors seen in dmesg about failing
to place the device into D0.

Signed-off-by: Tim Wawrzynczak 
Change-Id: I83fa1e5fabd3257b097c10e7a13c9861872685ea
---
M src/mainboard/google/brya/acpi/nvjt.asl
M src/mainboard/google/brya/acpi/nvop.asl
M src/mainboard/google/brya/acpi/power.asl
3 files changed, 32 insertions(+), 12 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/67212/2