Patch set updated for coreboot: d9ff58e superio/winbond/w83627ehg: Convert romstage to generic component
Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5589
-gerrit
commit d9ff58eb72fdcf756f4558180086aee63584a109 Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Sun Apr 27 23:28:31 2014 +1000
superio/winbond/w83627ehg: Convert romstage to generic component
Convert the serial init to the generic romstage component and corresponding boards using this sio.
Change-Id: Ib9f981f43e047013f9cbe20a22246ee2ed3ecf50 Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/asus/a8v-e_deluxe/romstage.c | 3 ++- src/mainboard/asus/a8v-e_se/romstage.c | 10 ++-------- src/mainboard/ibase/mb899/romstage.c | 1 + src/mainboard/iei/pm-lx-800-r11/romstage.c | 3 ++- src/mainboard/msi/ms7260/romstage.c | 3 ++- src/mainboard/msi/ms9282/romstage.c | 3 ++- src/mainboard/msi/ms9652_fam10/romstage.c | 3 ++- src/superio/winbond/w83627ehg/early_serial.c | 10 ---------- src/superio/winbond/w83627ehg/w83627ehg.h | 7 +++---- 9 files changed, 16 insertions(+), 27 deletions(-)
diff --git a/src/mainboard/asus/a8v-e_deluxe/romstage.c b/src/mainboard/asus/a8v-e_deluxe/romstage.c index efc4ac7..6a90fc1 100644 --- a/src/mainboard/asus/a8v-e_deluxe/romstage.c +++ b/src/mainboard/asus/a8v-e_deluxe/romstage.c @@ -38,6 +38,7 @@ unsigned int get_sbdn(unsigned bus); #include "cpu/x86/lapic.h" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/early_ht.c" +#include <superio/winbond/common/winbond.h> #include <superio/winbond/w83627ehg/w83627ehg.h> #include "southbridge/via/vt8237r/early_smbus.c" #include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ @@ -153,7 +154,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) struct sys_info *sysinfo = &sysinfo_car;
sio_init(); - w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); enable_rom_decode();
diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c index 19f5686..abe5f84 100644 --- a/src/mainboard/asus/a8v-e_se/romstage.c +++ b/src/mainboard/asus/a8v-e_se/romstage.c @@ -38,6 +38,7 @@ unsigned int get_sbdn(unsigned bus); #include "cpu/x86/lapic.h" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/early_ht.c" +#include <superio/winbond/common/winbond.h> #include <superio/winbond/w83627ehg/w83627ehg.h> #include "southbridge/via/vt8237r/early_smbus.c" #include "northbridge/amd/amdk8/debug.c" /* After vt8237r/early_smbus.c! */ @@ -153,7 +154,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) struct sys_info *sysinfo = &sysinfo_car;
sio_init(); - w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); enable_rom_decode();
@@ -166,13 +167,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enumerate_ht_chain(); }
- // FIXME why is this executed again? ---> - sio_init(); - w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - enable_rom_decode(); - // <--- FIXME why is this executed again? - print_info("now booting... real_main\n");
if (bist == 0) diff --git a/src/mainboard/ibase/mb899/romstage.c b/src/mainboard/ibase/mb899/romstage.c index 64df82e..d50f8c6 100644 --- a/src/mainboard/ibase/mb899/romstage.c +++ b/src/mainboard/ibase/mb899/romstage.c @@ -27,6 +27,7 @@ #include <cpu/x86/lapic.h> #include <lib.h> #include <cbmem.h> +#include <superio/winbond/common/winbond.h> #include "superio/winbond/w83627ehg/w83627ehg.h" #include <pc80/mc146818rtc.h> #include <console/console.h> diff --git a/src/mainboard/iei/pm-lx-800-r11/romstage.c b/src/mainboard/iei/pm-lx-800-r11/romstage.c index f996301..bf34e9a 100644 --- a/src/mainboard/iei/pm-lx-800-r11/romstage.c +++ b/src/mainboard/iei/pm-lx-800-r11/romstage.c @@ -32,6 +32,7 @@ #include <southbridge/amd/cs5536/cs5536.h> #include <southbridge/amd/cs5536/early_smbus.c> #include <southbridge/amd/cs5536/early_setup.c> +#include <superio/winbond/common/winbond.h> #include <superio/winbond/w83627ehg/w83627ehg.h> #include <northbridge/amd/lx/raminit.h>
@@ -63,7 +64,7 @@ void main(unsigned long bist)
cs5536_early_setup();
- w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init();
report_bist_failure(bist); diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c index 68feb3b..737f6d9 100644 --- a/src/mainboard/msi/ms7260/romstage.c +++ b/src/mainboard/msi/ms7260/romstage.c @@ -37,6 +37,7 @@ #include <spd.h> #include "cpu/x86/lapic.h" #include "northbridge/amd/amdk8/reset_test.c" +#include <superio/winbond/common/winbond.h> #include <superio/winbond/w83627ehg/w83627ehg.h> #include "cpu/x86/bist.h" #include "northbridge/amd/amdk8/debug.c" @@ -122,7 +123,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) pnp_enter_ext_func_mode(SERIAL_DEV); /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */ pnp_write_config(SERIAL_DEV, 0x24, 0); - w83627ehg_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); + winbond_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); pnp_exit_ext_func_mode(SERIAL_DEV);
setup_mb_resource_map(); diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c index 19592f3..3048542 100644 --- a/src/mainboard/msi/ms9282/romstage.c +++ b/src/mainboard/msi/ms9282/romstage.c @@ -37,6 +37,7 @@ #include "cpu/x86/lapic.h" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" +#include <superio/winbond/common/winbond.h> #include <superio/winbond/w83627ehg/w83627ehg.h> #include "cpu/x86/bist.h" #include <spd.h> @@ -139,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
- w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init();
/* Halt if there was a built in self test failure */ diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c index ad7dcde..3993bae 100644 --- a/src/mainboard/msi/ms9652_fam10/romstage.c +++ b/src/mainboard/msi/ms9652_fam10/romstage.c @@ -39,6 +39,7 @@ #include "lib/delay.c" #include "cpu/x86/lapic.h" #include "northbridge/amd/amdfam10/reset_test.c" +#include <superio/winbond/common/winbond.h> #include <superio/winbond/w83627ehg/w83627ehg.h> #include "cpu/x86/bist.h" #include "northbridge/amd/amdfam10/debug.c" @@ -126,7 +127,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) pnp_write_config(SERIAL_DEV, 0x24, (reg & 0xbf)); pnp_exit_ext_func_mode(SERIAL_DEV);
- w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init();
/* Halt if there was a built in self test failure */ diff --git a/src/superio/winbond/w83627ehg/early_serial.c b/src/superio/winbond/w83627ehg/early_serial.c index 84eb127..346d6cf 100644 --- a/src/superio/winbond/w83627ehg/early_serial.c +++ b/src/superio/winbond/w83627ehg/early_serial.c @@ -35,13 +35,3 @@ void pnp_exit_ext_func_mode(device_t dev) u16 port = dev >> 8; outb(0xaa, port); } - -void w83627ehg_enable_serial(device_t dev, u16 iobase) -{ - pnp_enter_ext_func_mode(dev); - pnp_set_logical_device(dev); - pnp_set_enable(dev, 0); - pnp_set_iobase(dev, PNP_IDX_IO0, iobase); - pnp_set_enable(dev, 1); - pnp_exit_ext_func_mode(dev); -} diff --git a/src/superio/winbond/w83627ehg/w83627ehg.h b/src/superio/winbond/w83627ehg/w83627ehg.h index e574cf3..02041fc 100644 --- a/src/superio/winbond/w83627ehg/w83627ehg.h +++ b/src/superio/winbond/w83627ehg/w83627ehg.h @@ -19,8 +19,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef SUPERIO_WINBOND_W83627EHG_W83627EHG_H -#define SUPERIO_WINBOND_W83627EHG_W83627EHG_H +#ifndef SUPERIO_WINBOND_W83627EHG_H +#define SUPERIO_WINBOND_W83627EHG_H
#define W83627EHG_FDC 0 /* Floppy */ #define W83627EHG_PP 1 /* Parallel port */ @@ -57,10 +57,9 @@ #if defined(__PRE_RAM__) void w83627ehg_enable_dev(device_t dev, u16 iobase); void w83627ehg_disable_dev(device_t dev); -void w83627ehg_enable_serial(device_t dev, u16 iobase); #endif
void pnp_enter_ext_func_mode(device_t dev); void pnp_exit_ext_func_mode(device_t dev);
-#endif /* SUPERIO_WINBOND_W83627EHG_W83627EHG_H */ +#endif /* SUPERIO_WINBOND_W83627EHG_H */
-
Edward O'Callaghan