Patch set updated for coreboot: southbridge/amd/sb700: Fix boot hang when AHCI mode disabled

[Timothy Pearson]

Timothy Pearson ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/12572

-gerrit

commit 3f7e3014b5a78d6ec47b3f021f13c0b50a1ee523
Author: Timothy Pearson 
Date:   Sun Oct 25 18:58:24 2015 -0500

southbridge/amd/sb700: Fix boot hang when AHCI mode disabled

Existence of requested PCI device was not checked when enabling
    IDE mode on the SP5100.  Fix incorrect PCI device ID and check
    for device existence before attempting setup.

Change-Id: I726c355571b5c67c9a13995be2352601c03ab1e4
    Signed-off-by: Timothy Pearson 
---
 src/southbridge/amd/sb700/early_setup.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c
index f7e9120..06c6c77 100644
--- a/src/southbridge/amd/sb700/early_setup.c
+++ b/src/southbridge/amd/sb700/early_setup.c
@@ -520,26 +520,28 @@ static void sb700_devices_por_init(void)
    if (!sata_ahci_mode){
 #if CONFIG_SOUTHBRIDGE_AMD_SUBTYPE_SP5100
    	/* SP5100 default SATA mode is RAID5 MODE */
-		dev = pci_locate_device(PCI_ID(0x1002, 0x4393), 0);
+		dev = pci_locate_device(PCI_ID(0x1002, 0x4392), 0);

-		/* Set SATA Operation Mode, Set to IDE mode */
-		byte = pci_read_config8(dev, 0x40);
-		byte |= (1 << 0);
-		pci_write_config8(dev, 0x40, byte);
+		if (dev != PCI_DEV_INVALID) {
+			/* Set SATA Operation Mode, Set to IDE mode */
+			byte = pci_read_config8(dev, 0x40);
+			byte |= (1 << 0);
+			pci_write_config8(dev, 0x40, byte);

-		dword = 0x01018f00;
-		pci_write_config32(dev, 0x8, dword);
+			dword = 0x01018f00;
+			pci_write_config32(dev, 0x8, dword);

-		/* set SATA Device ID writable */
-		dword = pci_read_config32(dev, 0x40);
-		dword &= ~(1 << 24);
-		pci_write_config32(dev, 0x40, dword);
+			/* set SATA Device ID writable */
+			dword = pci_read_config32(dev, 0x40);
+			dword &= ~(1 << 24);
+			pci_write_config32(dev, 0x40, dword);

-		/* set Device ID consistent with IDE emulation mode configuration */
-		pci_write_config32(dev, 0x0, 0x43901002);
+			/* set Device ID consistent with IDE emulation mode configuration */
+			pci_write_config32(dev, 0x0, 0x43901002);

-		/* rpr v2.13 4.17 Reset CPU on Sync Flood */
-		abcfg_reg(0x10050, 1 << 2, 1 << 2);
+			/* rpr v2.13 4.17 Reset CPU on Sync Flood */
+			abcfg_reg(0x10050, 1 << 2, 1 << 2);
+		}
 #endif
    }