Change in coreboot[master]: mb/google/brya/primus: Fix G2 touchscreen reset GPIO polarity

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/56923 )

Change subject: mb/google/brya/primus: Fix G2 touchscreen reset GPIO polarity
......................................................................

mb/google/brya/primus: Fix G2 touchscreen reset GPIO polarity

modify reset_gpio as active low to meet touchscreen spec

BUG=b:195490284
BRANCH=none
TEST=build coreboot and touchscreen works

Signed-off-by: Casper Chang 
Change-Id: I7ce1b3025db8abebf5693b34da846a7e969246fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56923
Tested-by: build bot (Jenkins) 
Reviewed-by: Tim Wawrzynczak 
---
M src/mainboard/google/brya/variants/primus/overridetree.cb
1 file changed, 1 insertion(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Tim Wawrzynczak: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/primus/overridetree.cb b/src/mainboard/google/brya/variants/primus/overridetree.cb
index caca16d..938766b 100644
--- a/src/mainboard/google/brya/variants/primus/overridetree.cb
+++ b/src/mainboard/google/brya/variants/primus/overridetree.cb
@@ -195,7 +195,7 @@
    			register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
    			register "generic.probed" = "1"
    			register "generic.reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C1)"
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
    			register "generic.reset_delay_ms" = "50"
    			register "generic.enable_gpio" =
    						"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"