Change in coreboot[master]: soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin array
Furquan Shaikh has uploaded this change for review. ( https://review.coreboot.org/25186
Change subject: soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin array ......................................................................
soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin array
This change uses an array pcie_rp_clkreq_pin for accepting CLKREQ# from mainboards instead of defining a separate property for each root port. This allows us to use memcpy to copy the entire array into FSP params as well as new properties for PCIe root ports can be added as arrays in future CLs.
BUG=b:74633273
Change-Id: Ifa05f1e38fcfd95063ec327712e472cdbd12dbb7 Signed-off-by: Furquan Shaikh furquan@google.com --- M src/mainboard/google/reef/variants/baseboard/devicetree.cb M src/mainboard/google/reef/variants/coral/devicetree.cb M src/mainboard/google/reef/variants/pyro/devicetree.cb M src/mainboard/google/reef/variants/sand/devicetree.cb M src/mainboard/google/reef/variants/snappy/devicetree.cb M src/mainboard/intel/apollolake_rvp/devicetree.cb M src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb M src/mainboard/intel/leafhill/devicetree.cb M src/mainboard/intel/minnow3/devicetree.cb M src/mainboard/siemens/mc_apl1/devicetree.cb M src/soc/intel/apollolake/chip.c M src/soc/intel/apollolake/chip.h 12 files changed, 64 insertions(+), 72 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/86/25186/1
diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb index 0f11f63..a8e24cd 100644 --- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb @@ -4,13 +4,13 @@ device lapic 0 on end end
- register "pcie_rp0_clkreq_pin" = "0" # wifi/bt + register "pcie_rp_clkreq_pin[0]" = "0" # wifi/bt # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# GPIO for PERST_0 # If the Board has PERST_0 signal, assign the GPIO diff --git a/src/mainboard/google/reef/variants/coral/devicetree.cb b/src/mainboard/google/reef/variants/coral/devicetree.cb index 0a06c76..c1b7067 100644 --- a/src/mainboard/google/reef/variants/coral/devicetree.cb +++ b/src/mainboard/google/reef/variants/coral/devicetree.cb @@ -4,13 +4,13 @@ device lapic 0 on end end
- register "pcie_rp0_clkreq_pin" = "0" # wifi/bt + register "pcie_rp_clkreq_pin[0]" = "0" # wifi/bt # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# GPIO for PERST_0 # If the Board has PERST_0 signal, assign the GPIO diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb index 5bfe2c2..cb297d9 100644 --- a/src/mainboard/google/reef/variants/pyro/devicetree.cb +++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb @@ -4,13 +4,13 @@ device lapic 0 on end end
- register "pcie_rp0_clkreq_pin" = "0" # wifi/bt + register "pcie_rp_clkreq_pin[0]" = "0" # wifi/bt # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# GPIO for PERST_0 # If the Board has PERST_0 signal, assign the GPIO diff --git a/src/mainboard/google/reef/variants/sand/devicetree.cb b/src/mainboard/google/reef/variants/sand/devicetree.cb index a6692e6..e53af88 100644 --- a/src/mainboard/google/reef/variants/sand/devicetree.cb +++ b/src/mainboard/google/reef/variants/sand/devicetree.cb @@ -4,13 +4,13 @@ device lapic 0 on end end
- register "pcie_rp0_clkreq_pin" = "0" # wifi/bt + register "pcie_rp_clkreq_pin[0]" = "0" # wifi/bt # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# GPIO for PERST_0 # If the Board has PERST_0 signal, assign the GPIO diff --git a/src/mainboard/google/reef/variants/snappy/devicetree.cb b/src/mainboard/google/reef/variants/snappy/devicetree.cb index 6adf94c..9719368 100644 --- a/src/mainboard/google/reef/variants/snappy/devicetree.cb +++ b/src/mainboard/google/reef/variants/snappy/devicetree.cb @@ -4,13 +4,13 @@ device lapic 0 on end end
- register "pcie_rp0_clkreq_pin" = "0" # wifi/bt + register "pcie_rp_clkreq_pin[0]" = "0" # wifi/bt # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# GPIO for PERST_0 # If the Board has PERST_0 signal, assign the GPIO diff --git a/src/mainboard/intel/apollolake_rvp/devicetree.cb b/src/mainboard/intel/apollolake_rvp/devicetree.cb index 746aaf3..f7e82a0 100644 --- a/src/mainboard/intel/apollolake_rvp/devicetree.cb +++ b/src/mainboard/intel/apollolake_rvp/devicetree.cb @@ -1,11 +1,11 @@ chip soc/intel/apollolake
- register "pcie_rp0_clkreq_pin" = "2" # PCIe slot 2 - register "pcie_rp1_clkreq_pin" = "3" # Wifi+BT M2 slot - register "pcie_rp2_clkreq_pin" = "0" # PCIe slot 1 - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[0]" = "2" # PCIe slot 2 + register "pcie_rp_clkreq_pin[1]" = "3" # Wifi+BT M2 slot + register "pcie_rp_clkreq_pin[2]" = "0" # PCIe slot 1 + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb b/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb index 45badcd..5a54430 100644 --- a/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb +++ b/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb @@ -4,13 +4,13 @@ device lapic 0 on end end
- register "pcie_rp0_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED" # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "3" # wifi/bt - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "1" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "3" # wifi/bt + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "1" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# GPIO for PERST_0 # If the Board has PERST_0 signal, assign the GPIO diff --git a/src/mainboard/intel/leafhill/devicetree.cb b/src/mainboard/intel/leafhill/devicetree.cb index 2a284d2..6c872b1 100644 --- a/src/mainboard/intel/leafhill/devicetree.cb +++ b/src/mainboard/intel/leafhill/devicetree.cb @@ -1,11 +1,11 @@ chip soc/intel/apollolake
- register "pcie_rp0_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/intel/minnow3/devicetree.cb b/src/mainboard/intel/minnow3/devicetree.cb index 2a284d2..6c872b1 100644 --- a/src/mainboard/intel/minnow3/devicetree.cb +++ b/src/mainboard/intel/minnow3/devicetree.cb @@ -1,11 +1,11 @@ chip soc/intel/apollolake
- register "pcie_rp0_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/siemens/mc_apl1/devicetree.cb b/src/mainboard/siemens/mc_apl1/devicetree.cb index e2b6cee..c1ef76b 100644 --- a/src/mainboard/siemens/mc_apl1/devicetree.cb +++ b/src/mainboard/siemens/mc_apl1/devicetree.cb @@ -7,12 +7,12 @@ register "sci_irq" = "SCIS_IRQ10"
# Disable unused clkreq of PCIe root ports - register "pcie_rp0_clkreq_pin" = "3" # PCIe-PCI-Bridge - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "0" # MACPHY - register "pcie_rp3_clkreq_pin" = "1" # MACPHY - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[0]" = "3" # PCIe-PCI-Bridge + register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[2]" = "0" # MACPHY + register "pcie_rp_clkreq_pin[3]" = "1" # MACPHY + register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" + register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED"
# EMMC TX DATA Delay 1 # Refer to EDS-Vol2-22.3. diff --git a/src/soc/intel/apollolake/chip.c b/src/soc/intel/apollolake/chip.c index 53ffdb9..6006773 100644 --- a/src/soc/intel/apollolake/chip.c +++ b/src/soc/intel/apollolake/chip.c @@ -531,12 +531,8 @@ /* Parse device tree and disable unused device*/ parse_devicetree(silconfig);
- silconfig->PcieRpClkReqNumber[0] = cfg->pcie_rp0_clkreq_pin; - silconfig->PcieRpClkReqNumber[1] = cfg->pcie_rp1_clkreq_pin; - silconfig->PcieRpClkReqNumber[2] = cfg->pcie_rp2_clkreq_pin; - silconfig->PcieRpClkReqNumber[3] = cfg->pcie_rp3_clkreq_pin; - silconfig->PcieRpClkReqNumber[4] = cfg->pcie_rp4_clkreq_pin; - silconfig->PcieRpClkReqNumber[5] = cfg->pcie_rp5_clkreq_pin; + memcpy(silconfig->PcieRpClkReqNumber, cfg->pcie_rp_clkreq_pin, + sizeof(silconfig->PcieRpClkReqNumber));
if (cfg->emmc_tx_cmd_cntl != 0) silconfig->EmmcTxCmdCntl = cfg->emmc_tx_cmd_cntl; diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h index 8573cf4..7a1d16a 100644 --- a/src/soc/intel/apollolake/chip.h +++ b/src/soc/intel/apollolake/chip.h @@ -28,6 +28,7 @@ #include <soc/pm.h> #include <soc/usb.h>
+#define MAX_PCIE_PORTS 6 #define CLKREQ_DISABLED 0xf #define APOLLOLAKE_I2C_DEV_MAX 8
@@ -43,12 +44,7 @@ * four CLKREQ inputs, but six root ports. Root ports without an * associated CLKREQ signal must be marked with "CLKREQ_DISABLED" */ - uint8_t pcie_rp0_clkreq_pin; - uint8_t pcie_rp1_clkreq_pin; - uint8_t pcie_rp2_clkreq_pin; - uint8_t pcie_rp3_clkreq_pin; - uint8_t pcie_rp4_clkreq_pin; - uint8_t pcie_rp5_clkreq_pin; + uint8_t pcie_rp_clkreq_pin[MAX_PCIE_PORTS];
/* [14:8] DDR mode Number of dealy elements.Each = 125pSec. * [6:0] SDR mode Number of dealy elements.Each = 125pSec.
-
Furquan Shaikh (Code Review)