Change in coreboot[master]: Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8023c2...
Sean Rhodes has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/58346 )
Change subject: Signed-off-by: Sean Rhodes sean@starlabs.systems Change-Id: I8023c26de23c874c84106fda96e64dcfa0c5ba32 ......................................................................
Signed-off-by: Sean Rhodes sean@starlabs.systems Change-Id: I8023c26de23c874c84106fda96e64dcfa0c5ba32
Change-Id: I9101d014561d8c983d5748756acb4f45d347cfce --- A src/ec/starlabs/merlin/Kconfig A src/ec/starlabs/merlin/Makefile.inc A src/ec/starlabs/merlin/acpi/ac.asl A src/ec/starlabs/merlin/acpi/battery.asl A src/ec/starlabs/merlin/acpi/cmos.asl A src/ec/starlabs/merlin/acpi/ec.asl A src/ec/starlabs/merlin/acpi/hid.asl A src/ec/starlabs/merlin/acpi/keyboard.asl A src/ec/starlabs/merlin/acpi/lid.asl A src/ec/starlabs/merlin/acpi/suspend.asl A src/ec/starlabs/merlin/acpi/thermal.asl A src/ec/starlabs/merlin/acpi/typec.asl A src/ec/starlabs/merlin/acpi/ubtc.asl A src/ec/starlabs/merlin/chip.h A src/ec/starlabs/merlin/ec.c A src/ec/starlabs/merlin/ec.h A src/ec/starlabs/merlin/variants/cml/ecdefs.h A src/ec/starlabs/merlin/variants/cml/emem.asl A src/ec/starlabs/merlin/variants/cml/events.asl A src/ec/starlabs/merlin/variants/kbl/ecdefs.h A src/ec/starlabs/merlin/variants/kbl/emem.asl A src/ec/starlabs/merlin/variants/kbl/events.asl A src/ec/starlabs/merlin/variants/merlin/ecdefs.h A src/ec/starlabs/merlin/variants/merlin/emem.asl A src/ec/starlabs/merlin/variants/merlin/events.asl A src/ec/starlabs/merlin/variants/tgl/ecdefs.h A src/ec/starlabs/merlin/variants/tgl/emem.asl A src/ec/starlabs/merlin/variants/tgl/events.asl 28 files changed, 3,063 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/46/58346/1
diff --git a/src/ec/starlabs/merlin/Kconfig b/src/ec/starlabs/merlin/Kconfig new file mode 100644 index 0000000..e48cb73 --- /dev/null +++ b/src/ec/starlabs/merlin/Kconfig @@ -0,0 +1,28 @@ +## SPDX-License-Identifier: GPL-2.0-only + +config EC_STARLABS_ITE + bool + select EC_ACPI + help + Interface to ITE embedded controller principally in Star Labs notebooks. + +config EC_STARLABS_IT_BIN + bool "Add Star Labs EC binary file" + default n + depends on EC_STARLABS_ITE + help + The EC binary + +config EC_STARLABS_KBL_LEVELS + bool "Adjustable Keyboard Backlight" + default n + depends on EC_STARLABS_ITE + help + Select to enable various levels of brightness for the keyboard. + +config EC_STARLABS_MERLIN + bool "Use open-source ec aka Merlin" + default n + depends on EC_STARLABS_ITE + help + Use open source embedded controller firmware diff --git a/src/ec/starlabs/merlin/Makefile.inc b/src/ec/starlabs/merlin/Makefile.inc new file mode 100644 index 0000000..979beeb --- /dev/null +++ b/src/ec/starlabs/merlin/Makefile.inc @@ -0,0 +1,32 @@ +## SPDX-License-Identifier: GPL-2.0-only + +PHONY+=add_ite_fw +INTERMEDIATE+=add_ite_fw + +ifeq ($(CONFIG_EC_STARLABS_MERLIN),y) +CPPFLAGS_common += -I$(src)/ec/starlabs/merlin/variants/merlin +else +CPPFLAGS_common += -I$(src)/ec/starlabs/merlin/variants/$(VARIANT_DIR) +endif + +ifeq ($(CONFIG_EC_STARLABS_ITE),y) +all-y += ec.c +smm-$(CONFIG_DEBUG_SMI) += ec.c + +ifeq ($(CONFIG_EC_STARLABS_IT_BIN),y) +add_ite_fw: $(obj)/coreboot.pre + $(CBFSTOOL) $(obj)/coreboot.pre write -r EC -f $(CONFIG_EC_STARLABS_IT_BIN_PATH) -u + +ifeq ($(CONFIG_EC_STARLABS_IT_BIN_PATH),) +files_added:: warn_no_ite_fw + +PHONY+=warn_no_ite_fw +warn_no_ite_fw: + printf "\n\t** WARNING **\n" + printf "coreboot has been built without the ITE EC Firmware.\n" + printf "Do not flash this image. Your LabTop Mk IV's power button\n" + printf "may not respond when you press it.\n\n" + +endif +endif +endif diff --git a/src/ec/starlabs/merlin/acpi/ac.asl b/src/ec/starlabs/merlin/acpi/ac.asl new file mode 100644 index 0000000..076a453 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/ac.asl @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Device (ADP1) +{ + Name (_HID, "ACPI0003") + Method (_STA) + { + Return (0x0F) + } + Method (_PSR, 0) + { + If (ECPS && 0x01) + { + PWRS = 0x01 + } Else { + PWRS = 0x00 + } + Return(PWRS) + } + Method (_PCL, 0) + { + Return ( + Package() { _SB } + ) + } +} diff --git a/src/ec/starlabs/merlin/acpi/battery.asl b/src/ec/starlabs/merlin/acpi/battery.asl new file mode 100644 index 0000000..89ba4f7 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/battery.asl @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Device (BAT0) +{ + Name (_HID, EisaId("PNP0C0A")) + Name (_UID, 0) + Method (_STA, 0, NotSerialized) + { + // Battery Status + // 0x80 BIT1 0x01 = Present + // 0x80 BIT1 0x00 = Not Present + If(ECPS && 0x02) + { + Return(0x1F) + } + Return(0x0F) + } + Name (BPKG, Package(13) + { + 1, // 0: Power Unit + 0xFFFFFFFF, // 1: Design Capacity + 0xFFFFFFFF, // 2: Last Full Charge Capacity + 1, // 3: Battery Technology(Rechargeable) + 0xFFFFFFFF, // 4: Design Voltage 10.8V + 0, // 5: Design capacity of warning + 0, // 6: Design capacity of low + 0x64, // 7: Battery capacity granularity 1 + 0, // 8: Battery capacity granularity 2 + "597077-3S", // 9: Model Number + "3ICP6/70/77", // 10: Serial Number + "Real", // 11: Battery Type + "DGFGE" // 12: OEM Information + }) + Method (_BIF, 0, Serialized) + { + BPKG[0x01] = B1DC + BPKG[0x02] = B1FC + BPKG[0x04] = B1DV + If(B1FC) + { + BPKG[0x05] = B1FC / 0x0a + BPKG[0x06] = B1FC / 0x64 + BPKG[0x07] = B1DC / 0x64 + } + Return(BPKG) + } + Name (PKG1, Package (4) + { + 0xFFFFFFFF, // Battery State + 0xFFFFFFFF, // Battery Present Rate + 0xFFFFFFFF, // Battery Remaining Capacity + 0xFFFFFFFF, // Battery Present Voltage + }) + Method (_BST, 0, NotSerialized) + { + PKG1[0x00] = (B1ST & 0x07) + PKG1[0x01] = B1PR + PKG1[0x02] = B1RC + PKG1[0x03] = B1PV + Return(PKG1) + } + Method (_PCL, 0, NotSerialized) + { + Return ( + Package() { _SB } + ) + } +} diff --git a/src/ec/starlabs/merlin/acpi/cmos.asl b/src/ec/starlabs/merlin/acpi/cmos.asl new file mode 100644 index 0000000..b6ef5a0 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/cmos.asl @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +OperationRegion (CMOS, SystemIO, 0x70, 0x2) +Field (CMOS, ByteAcc, NoLock, Preserve) +{ + IND1, 8, + DAT1, 8, +} + +IndexField (IND1, DAT1, ByteAcc, NoLock, Preserve) +{ + Offset (0x4b), + KLTC, 8, // Keyboard Backlight Timeout + FCLS, 8, // Ctrl Fn Reverse (make keyboard Apple-like) + MXCH, 8, // Max Charge Level + FNMD, 8, // Fan Mode +} + +OperationRegion (CMS2, SystemIO, 0x72, 0x2) +Field (CMS2, ByteAcc, NoLock, Preserve) +{ + IND2, 8, + DAT2, 8, +} + +IndexField (IND2, DAT2, ByteAcc, NoLock, Preserve) +{ + Offset (0x80), + FLKS, 8, // Function Lock State + TPLS, 8, // Trackpad State + KLBC, 8, // Keyboard Backlight Brightness + KLSC, 8, // Keyboard Backlight State +} diff --git a/src/ec/starlabs/merlin/acpi/ec.asl b/src/ec/starlabs/merlin/acpi/ec.asl new file mode 100644 index 0000000..09d62de --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/ec.asl @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include "ubtc.asl" + +Scope (_SB.PCI0.LPCB) +{ + #include "cmos.asl" + + Device (EC) + { + Name (_HID, EisaId ("PNP0C09")) + Name (_UID, 0x01) + Name (_GPE, EC_GPE_SCI) + Name (ECAV, 0x00) // Check if EC OpRegion accessed before Embedded Controller Driver loaded + Name (ECTK, 0x01) // Embedded Controller Boot Resources Table Check to correct ECAV flag in the beginning + Name (B2ST, 0x00) + Name (CFAN, 0x00) + Name (CMDR, 0x00) + Name (DOCK, 0x00) + Name (PLMX, 0x00) + Name (PECH, 0x00) + Name (PECL, 0x00) + Name (PENV, 0x00) + Name (PINV, 0x00) + Name (PPSH, 0x00) + Name (PPSL, 0x00) + Name (PSTP, 0x00) + Name (RPWR, 0x00) + Name (VPWR, 0x00) + Name (WTMS, 0x00) + Name (AWT2, 0x00) + Name (AWT1, 0x00) + Name (AWT0, 0x00) + Name (DLED, 0x00) + Name (SPT2, 0x00) + Name (PB10, 0x00) + Name (IWCW, 0x00) + Name (IWCR, 0x00) + Name (PVOL, 0x00) + Mutex (ECMT, 0x00) + + Name(BFFR, ResourceTemplate() + { + IO(Decode16, 0x0062, 0x0062, 0x00, 0x01) + IO(Decode16, 0x0066, 0x0066, 0x00, 0x01) + }) + + Method (_CRS, 0, Serialized) + { + + Return(BFFR) + } + + Method (_STA, 0, NotSerialized) + { + \LIDS = 0x03 + Return (0x0F) + } + + OperationRegion (SIPR, SystemIO, 0xB2, 0x1) + Field (SIPR, ByteAcc, Lock, Preserve) { + SMB2, 8 + } + + #include "emem.asl" + + // ECRD (Embedded Read Method) + // + // Handle all commands sent to EC by BIOS + // + // Arguments: + // Arg0 = Object to Read + // + // Return Value: + // Read Value + // + Method (ECRD, 1, Serialized, 0, IntObj, FieldUnitObj) + { + // + // Check for ECDT support, set ECAV to One if ECDT is supported by OS + // Only check once at beginning since ECAV might be clear later in certain conditions + // + If (ECTK) { + If (_REV >= 0x02) { + ECAV = 0x01 + } + ECTK = 0x00 // Clear flag for checking once only + } + + Local0 = Acquire (ECMT, 1000) // Save Acquired Result + If (Local0 == 0x00) // Check for Mutex Acquisition + { + If (ECAV) { + Local1 = DerefOf (Arg0) // Execute Read from EC + Release (ECMT) + Return (Local1) + } Else { + Release (ECMT) + } + } + Return (Local1) // Return incase Arg0 doesnt exist + } + + // ECWT (Embedded Write Method) + // + // Handle all commands sent to EC by BIOS + // + // Arguments: + // Arg0 = Value to Write + // Arg1 = Object to Write to + // + Method (ECWT, 2, Serialized,,,{IntObj, FieldUnitObj}) + { + // + // Check for ECDT support, set ECAV to One if ECDT is supported by OS + // Only check once at beginning since ECAV might be clear later in certain conditions + // + If (ECTK) { + If (_REV >= 2) { + ECAV = 0x01 + } + ECTK = 0x00 // Clear flag for checking once only + } + + Local0 = Acquire(ECMT, 1000) // Save Acquired Result + If (Local0 == 0x00) // Check for Mutex Acquisition + { + If (ECAV) { + Arg1 = Arg0 // Execute Write to EC + } + Release (ECMT) + } + } + + // ECWR (Embedded Write Method) + // + // Handle all commands sent to EC by BIOS + // + // Arguments: + // Arg0 = Value to Write + // Arg1 = Object to Write to + // + // Return Value: + // None + // + Method (ECWR, 2, Serialized,,,{IntObj, FieldUnitObj}) + { + Local0 = Acquire (ECMT, 1000) // Save Acquired Result + If (Local0 == 0x00) // Check for Mutex Acquisition + { + If (ECAV) { + Arg1 = Arg0 // Execute Write to EC + Local1 = 0x00 + While (1) { + If (Arg0 == DerefOf (Arg1)) { + Break + } + Sleep (1) + Arg1 = Arg0 + Add (Local1, 1, Local1) + If (Local1 == 0x03) { + Break + } + } + } + Release (ECMT) + } + } + + Method (ECMD, 0, Serialized) + { + Return (0x00) + } + + Method (ECM1, 0, Serialized) + { + Return (0x00) + } + + Method (ECNT, 0, Serialized) + { + Return (0x00) + } + + #include "ac.asl" + #include "battery.asl" + #include "events.asl" + #include "lid.asl" + #include "typec.asl" + + Method (_REG, 2, NotSerialized) + { + If ((Arg0 == 0x03) && (Arg1 == 0x01)) + { + // Load EC Driver + ECAV = 0x01 + + // Initialise the Lid State + \LIDS = LSTE + + // Initialise the OS State + OSFG = 0x01 + + // Initialise the Power State + PWRS = (ECRD (RefOf(ECPS)) & 0x01) + + // Inform the platform code + PNOT() + } + } + } +} diff --git a/src/ec/starlabs/merlin/acpi/hid.asl b/src/ec/starlabs/merlin/acpi/hid.asl new file mode 100644 index 0000000..1fe18d1 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/hid.asl @@ -0,0 +1,357 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Device (HIDD) // HID Device +{ + Name (_HID, "INTC1051") // Intel Ultrabook HID Platform Event Driver. + Name (HBSY, 0) // HID Busy + Name (HIDX, 0) // HID Index + Name (HMDE, 0) // HID Mode + Name (HRDY, 0) // HID Ready + Name (BTLD, 0) // Button Driver Loaded + Name (BTS1, 0) // Button Status + Method (_STA, 0, Serialized) // Status Method + { + // Usually, ACPI will check if the OS is 0x07DD (2013 - Windows 8.1ish) + // before showing the HID event filter. Seeing as we use Linux we show + // it regardless. + Return (0x0F) + } + // + // HID Driver Descriptor Method - Called by HID Driver during initialization + // to obtain HID Descriptor information. + // + // Input: + // None + // + // Output: + // Package containing a complete HID Descriptor information. + // + Name(DPKG, Package(4) + { + 0x11111111, + 0x22222222, + 0x33333333, + 0x44444444, + }) + Method (HDDM, 0, Serialized) + { + Return(DPKG) + } + // + // HID Driver Event Method - Called by HID Driver to get the specific + // platform event. + // + // Input: + // None + // + // Output: + // Mode 0 = Index of HID Input Report, per pre-defined Table. + // Mode 1 = Package containing a complete HID Input Report. + // + Method (HDEM, 0, Serialized) + { + HBSY = 0x00 // Clear HID Busy. + // Simple Mode is hardcoded for now. Return Simple Mode HID Index Value. + If (HMDE == 0x00) + { + Return(HIDX) + } + Return(HMDE) + } + // + // HID Driver Mode Method - Called by HID Driver during initialization to get + // the platform mode of operation. + // + // Input: + // None + // + // Output: + // 0 = Simple Mode. + // 1 = Advanced Mode. + // + Method (HDMM, 0, Serialized) + { + Return(HMDE) // Return Mode of operation. + } + // + // HID Driver Status Method - called by HID Driver to report platform readiness status. + // Input: Driver Status. + // 0 = Driver Unloaded. + // 1 = Driver Loaded and Ready. + // + // Output: None + // + Method (HDSM, 1, Serialized) + { + HRDY = Arg0 // Store HID Ready Status. + // Eventually code will communicate to platform the Driver status (enabled/disabled). + } + // + // HID Platform Event Method - called by Platform to communicate HID Event to Driver. + // Input: + // Mode 0 = Index of HID Event. + // Mode 1 = Package containing a complete HID Report. + // + Method (HPEM, 1, Serialized) // HID Platform Event Method. + { + HBSY = 0x01 // Set HID Busy. + // Simple Mode is hardcoded for now. Simply store HID Index value. + If (HMDE == 0x00) + { + HIDX = Arg0 + } Else { + HIDX = Arg0 + } + Notify (_SB.HIDD, 0xC0) // Notify Driver to get HID Event. + Local0 = 0x00 // Initialize Local0 as a timeout counter. + While((Local0 < 0xFA) && HBSY) // Wait <= 1 second for Driver to ACK success. + { + Sleep (0x04) // Delay 4 ms. + Local0++ // Increment Timeout. + } + If (HBSY == 0x01) // Failure? + { + HBSY = 0x00 // Yes. Clear HID Busy Flag. + HIDX = 0x00 // Set HID Simple Mode Index = 0 = Undefined. + Return (0x01) // Return Failure. + } Else { + Return (0x00) // Return Success. + } + } + // + // HID Button Load Method - called by Platform to say HID driver is capable of receiving 5-button array notifies. + // Input: + // None + // + // Output: + // None + // + Method (BTNL, 0, Serialized) // HID Button Enable/Disable Method + { + BTS1 = 0x00 + } + // + // HID Button Enable/Disable Method - called by Platform to disable/enable notification based on button press + // Input: + // Arg0 = Bit mask of buttons to Enable or Disable: + // 1 == Button should be Enabled + // 0 == Button should be Disabled + // Bits[0]: Power Button N/A to disable + // Bits[1]: Windows Button + // Bits[2]: Volume Up Button + // Bits[3]: Volume Down Button + // Bits[4]: Rotation Lock Button + // Bits[5:31]: Reserved + // + // Output: + // None + // + Method (BTNE, 1, Serialized) // HID Button Enable/Disable Method + { + Return (BTS1) + } + // + // HID Button Status - called by Platform to get what buttons are enabled and disabled + // Input: + // None + // + // Output: + // Bit mask of buttons' current status: + // 1 == Button is Enabled + // 0 == Button is Disabled + // Bits[0]: Power Button N/A to disable + // Bits[1]: Windows Button + // Bits[2]: Volume Up Button + // Bits[3]: Volume Down Button + // Bits[4]: Rotation Lock Button + // Bits[5:31]: Reserved + // + Method (BTNS, 0, Serialized) + { + Return (BTS1) + } + // + // HID Button Capabilities Method - called by Platform to determine what buttons are supported + // Input: + // None + // + // Output: + // Bit mask of buttons supported: + // 1 == Button is Supported + // 0 == Button is not Supported + // Bits[0]: Power Button (Must be 1) + // Bits[1]: Windows Button + // Bits[2]: Volume Up Button + // Bits[3]: Volume Down Button + // Bits[4]: Rotation Lock Button + // Bits[5:31]: Reserved + // + Method (BTNC, 0, Serialized) // HID Button Capabilities Method + { + Return(0x1F) + } + + // + // HEBC: HID Event Base Capabilities [31:0]- To specify the base button capabilities supported + // on platform by returning a ULONG value with the following bit level definition + // + // Input: + // None + // + // 0 = Button not supported + // 1 = Button supported + // Output: + // Bits [0] - Windows Button (Windows 8.1 supported), Rotation Lock (Windows 8.1 supported), Num Lock, Home, End, Page Up, Page Down + // Bits [1] - Wireless Radio Control + // Bits [2] - System Power Down (Windows 8.1 supported) + // Bits [3] - System Hibernate + // Bits [4] - System Sleep/ System Wake + // Bits [5] - Scan Next Track + // Bits [6] - Scan Previous Track + // Bits [7] - Stop + // Bits [8] - Play/Pause + // Bits [9] - Mute + // Bits [10] - Volume Increment (Windows 8.1 supported) + // Bits [11] - Volume Decrement (Windows 8.1 supported) + // Bits [12] - Display Brightness Increment + // Bits [13] - Display Brightness Decrement + // Bits [14] - Lock Tablet + // Bits [15] - Release Tablet + // Bits [16] - Toggle Bezel + // Bits [17] - 5 button array (Windows 10 supported - Power, Windows Home, Volume Up, Volume Down, Rotation Lock) + // Bits [18] - Button 1 + // Bits [19] - Button 2 + // Bits [20] - Button 3 + // Bits [21] - Button 4 + // Bits [22] - Button 5 + // Bits [23-31] - reserved + // + // Modify below table if the target platform has different capabilities. Each bit corresponding the above table definition. + // + Name (HEB2, 0) // Extended 32bit capability definition for future enhancements. + Method (HEBC, 0, Serialized) { + // Its possible to return (\HEB1) + Return (0x00) + } + Method (H2BC, 0, Serialized) { + // Its possible to return (\HEB1) + Return (0x00) + } + // + // HEEC- Hid Event Extended Capabilities [32:63] + // + Method (HEEC, 0, Serialized) { + // Its possible to return (\HEB2) + Return(0x00) + } + // + // HIDD _DSM + // _DSM : Device Specific Method for the Windows Compatible Button Array. + // + // Arg0: UUID Unique function identifier + // Arg1: Integer Revision Level + // Arg2: Integer Function Index + // Arg3: Package Parameters + // + Method (_DSM, 4, Serialized, 0, UnknownObj, {BuffObj, IntObj, IntObj, PkgObj}) + { + // Compare passed in UUID to supported UUID. + If (Arg0 == ToUUID ("EEEC56B3-4442-408F-A792-4EDD4D758054")) + { + If (0x01 == ToInteger(Arg1)) // Revision 1. + { + Switch (ToInteger(Arg2)) // Switch to Function Index. + { + // + // Function 0, Query of supported functions. + // + Case (0x00) + { + Return (Buffer() {0xFF, 0x03}) // Total 9 function indices are supported including this. + } + // + // Function 1, BTNL. Button Load Method. No Input/Output. + // + Case (0x01) + { + BTNL() + } + // + // Function 2, HDMM. HID Driver Mode Method. + // Input:None + // Output:HDMM output. See HDMM + // + Case (0x02) + { + Return (HDMM()) + } + // + // Function 3, HDSM. HID Driver Status Method. + // Input: 0 - The driver is not available. 1 - The driver is available. + // Output: None + // + Case (0x03) + { + HDSM (DeRefOf(Index(Arg3, 0x00))) + } + // + // Function 4, HDEM. HID Driver Event Method. + // Input: None. + // Output: Package contains Supported Keys (Mode 0) + // + Case (0x04) + { + Return (HDEM()) + } + // + // Function 5 BTNS. Button Status Method. + // Input: None. + // Output: Int32 which contains a bit map of Buttons' enable/disable states + // + Case (0x05) + { + Return (BTNS()) + } + // + // Function 6 BTNE. Button Enable/Disable Method. + // Input: Int32 Bit mask of buttons enable/disable control. 1- Button should be Enabled, 0- Button should be Disabled + // Output: None. + // + Case (0x06) + { + BTNE (DeRefOf(Index(Arg3, 0x00))) + } + // + // Function 7 HEBC. Button implemented state. + // Input: None + // Output: Int32 Bit map which shows what buttons are implemented on this system. + // + Case (0x07) + { + Return (HEBC()) + } + // + // Function 8 VGBS. Virtual GPIO Button Status. + // Input: None + // Output: Intger Bit map which shows what Virtual GPIO Button status. Currently only Dock/Slate modes are supported. + // + Case (0x08) + { + Return (0x00) + } + // + // Function 9 H2BC. Button implemented state. + // Input: None + // Output: Int32 Bit map which shows what buttons are implemented on this system. + // + Case (0x09) + { + Return (H2BC()) + } + } + } + } + // If the code falls through to this point, just return a buffer of 0. + Return (Buffer() {0x00}) + } +} diff --git a/src/ec/starlabs/merlin/acpi/keyboard.asl b/src/ec/starlabs/merlin/acpi/keyboard.asl new file mode 100644 index 0000000..c611bfa --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/keyboard.asl @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method(_Q80) // Volume up +{ + Store ("-----> _Q80", Debug) + Notify (_SB.HIDD, 0xC4) + Notify (_SB.HIDD, 0xC5) + Store ("<----- _Q80", Debug) +} + +Method(_Q81) // Volume down +{ + Store ("-----> _Q81", Debug) + Notify (_SB.HIDD, 0xC6) + Notify (_SB.HIDD, 0xC7) + Store ("<----- _Q81", Debug) +} + +Method(_Q99) // Wireless mode +{ + Store ("-----> _Q99", Debug) + ^^^^HIDD.HPEM (8) + Store ("<----- _Q80", Debug) +} + +Method(_Q06) // Brightness decrease +{ + ^^^^HIDD.HPEM (19) +} + +Method(_Q05) // Brightness increase +{ + ^^^^HIDD.HPEM (20) +} + +Method(_Q08) // FN lock QEvent +{ + FNLC = FNST +} + +Method(_Q54) // Power Button Event +{ + Store ("-----> _Q54", Debug) + Store ("<----- _Q54", Debug) +} + +Method(_QD5) // 10 second power button press +{ + Store ("-----> _QD5", Debug) + _SB.PWPR() + Store ("<----- _QD5", Debug) +} + +Method(_QD6) // 10 second power button de-press +{ + Store ("-----> _QD6", Debug) + _SB.PWRR() + Store ("<----- _QD6", Debug) +} diff --git a/src/ec/starlabs/merlin/acpi/lid.asl b/src/ec/starlabs/merlin/acpi/lid.asl new file mode 100644 index 0000000..8b0edb5 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/lid.asl @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Device (LID0) +{ + Name (_HID, EisaId ("PNP0C0D")) + Method (_STA) + { + Return (0x0F) + } + Method (_LID,0) + { + // 0x00 == Closed + // 0x01 == Open + Return (^^LSTE) + } +} diff --git a/src/ec/starlabs/merlin/acpi/suspend.asl b/src/ec/starlabs/merlin/acpi/suspend.asl new file mode 100644 index 0000000..7c8f2b1 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/suspend.asl @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method (RPTS, 1, NotSerialized) +{ + _SB.PCI0.LPCB.EC.OSFG = 0x00 + + If ((Arg0 == 0x04) || (Arg0 == 0x05)) + { + /* Store current EC settings */ + _SB.PCI0.LPCB.EC.TPLA = _SB.PCI0.LPCB.TPLS + _SB.PCI0.LPCB.EC.FLKA = _SB.PCI0.LPCB.FLKS + _SB.PCI0.LPCB.EC.KLBE = _SB.PCI0.LPCB.KLBC + } +} + +Method (RWAK, 1, Serialized) +{ + _SB.PCI0.LPCB.EC.OSFG = 0x01 +} diff --git a/src/ec/starlabs/merlin/acpi/thermal.asl b/src/ec/starlabs/merlin/acpi/thermal.asl new file mode 100644 index 0000000..a112fa2 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/thermal.asl @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method(_QF0) // Thermal event. +{ + Notify (_TZ.TZ01, 0x80 +} diff --git a/src/ec/starlabs/merlin/acpi/typec.asl b/src/ec/starlabs/merlin/acpi/typec.asl new file mode 100644 index 0000000..9d5b990 --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/typec.asl @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method (UCSW, 0, Serialized) +{ + Sleep (0x32) + MGO0 = ^^^^UBTC.MGO0 + MGO1 = ^^^^UBTC.MGO1 + MGO2 = ^^^^UBTC.MGO2 + MGO3 = ^^^^UBTC.MGO3 + MGO4 = ^^^^UBTC.MGO4 + MGO5 = ^^^^UBTC.MGO5 + MGO6 = ^^^^UBTC.MGO6 + MGO7 = ^^^^UBTC.MGO7 + MGO8 = ^^^^UBTC.MGO7 + MGO9 = ^^^^UBTC.MGO9 + MGOA = ^^^^UBTC.MGOA + MGOB = ^^^^UBTC.MGOB + MGOC = ^^^^UBTC.MGOC + MGOD = ^^^^UBTC.MGOD + MGOE = ^^^^UBTC.MGOE + MGOF = ^^^^UBTC.MGOF + CTL0 = ^^^^UBTC.CTL0 + CTL1 = ^^^^UBTC.CTL1 + CTL2 = ^^^^UBTC.CTL2 + CTL3 = ^^^^UBTC.CTL3 + CTL4 = ^^^^UBTC.CTL4 + CTL5 = ^^^^UBTC.CTL5 + CTL6 = ^^^^UBTC.CTL6 + CTL7 = ^^^^UBTC.CTL7 + OPWE = 0xE0 +} + +Method (UCSR, 0, Serialized) +{ + Sleep (0x32) + ^^^^UBTC.MGI0 = MGI0 + ^^^^UBTC.MGI1 = MGI1 + ^^^^UBTC.MGI2 = MGI2 + ^^^^UBTC.MGI3 = MGI3 + ^^^^UBTC.MGI4 = MGI4 + ^^^^UBTC.MGI5 = MGI5 + ^^^^UBTC.MGI6 = MGI6 + ^^^^UBTC.MGI7 = MGI7 + ^^^^UBTC.MGI8 = MGI8 + ^^^^UBTC.MGI9 = MGI9 + ^^^^UBTC.MGIA = MGIA + ^^^^UBTC.MGIB = MGIB + ^^^^UBTC.MGIC = MGIC + ^^^^UBTC.MGID = MGID + ^^^^UBTC.MGIE = MGIE + ^^^^UBTC.MGIF = MGIF + ^^^^UBTC.CCI0 = CCI0 + ^^^^UBTC.CCI1 = CCI1 + ^^^^UBTC.CCI2 = CCI2 + ^^^^UBTC.CCI3 = CCI3 +} + +Method (UCEV, 0, Serialized) +{ + Sleep (0x32) + ^^^^UBTC.MGI0 = MGI0 + ^^^^UBTC.MGI1 = MGI1 + ^^^^UBTC.MGI2 = MGI2 + ^^^^UBTC.MGI3 = MGI3 + ^^^^UBTC.MGI4 = MGI4 + ^^^^UBTC.MGI5 = MGI5 + ^^^^UBTC.MGI6 = MGI6 + ^^^^UBTC.MGI7 = MGI7 + ^^^^UBTC.MGI8 = MGI8 + ^^^^UBTC.MGI9 = MGI9 + ^^^^UBTC.MGIA = MGIA + ^^^^UBTC.MGIB = MGIB + ^^^^UBTC.MGIC = MGIC + ^^^^UBTC.MGID = MGID + ^^^^UBTC.MGIE = MGIE + ^^^^UBTC.MGIF = MGIF + ^^^^UBTC.CCI0 = CCI0 + ^^^^UBTC.CCI1 = CCI1 + ^^^^UBTC.CCI2 = CCI2 + ^^^^UBTC.CCI3 = CCI3 + Notify (^^^^UBTC, 0x80) +} diff --git a/src/ec/starlabs/merlin/acpi/ubtc.asl b/src/ec/starlabs/merlin/acpi/ubtc.asl new file mode 100644 index 0000000..f29fb9d --- /dev/null +++ b/src/ec/starlabs/merlin/acpi/ubtc.asl @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +External(_SB.UBTC, DeviceObj) +External(_SB.UBTC.MGI0, IntObj) +External(_SB.UBTC.MGI1, IntObj) +External(_SB.UBTC.MGI2, IntObj) +External(_SB.UBTC.MGI3, IntObj) +External(_SB.UBTC.MGI4, IntObj) +External(_SB.UBTC.MGI5, IntObj) +External(_SB.UBTC.MGI6, IntObj) +External(_SB.UBTC.MGI7, IntObj) +External(_SB.UBTC.MGI8, IntObj) +External(_SB.UBTC.MGI9, IntObj) +External(_SB.UBTC.MGIA, IntObj) +External(_SB.UBTC.MGIB, IntObj) +External(_SB.UBTC.MGIC, IntObj) +External(_SB.UBTC.MGID, IntObj) +External(_SB.UBTC.MGIE, IntObj) +External(_SB.UBTC.MGIF, IntObj) + +External(_SB.UBTC.CTL0, IntObj) +External(_SB.UBTC.CTL1, IntObj) +External(_SB.UBTC.CTL2, IntObj) +External(_SB.UBTC.CTL3, IntObj) +External(_SB.UBTC.CTL4, IntObj) +External(_SB.UBTC.CTL5, IntObj) +External(_SB.UBTC.CTL6, IntObj) +External(_SB.UBTC.CTL7, IntObj) + +External(_SB.UBTC.MGO0, IntObj) +External(_SB.UBTC.MGO1, IntObj) +External(_SB.UBTC.MGO2, IntObj) +External(_SB.UBTC.MGO3, IntObj) +External(_SB.UBTC.MGO4, IntObj) +External(_SB.UBTC.MGO5, IntObj) +External(_SB.UBTC.MGO6, IntObj) +External(_SB.UBTC.MGO7, IntObj) +External(_SB.UBTC.MGO8, IntObj) +External(_SB.UBTC.MGO9, IntObj) +External(_SB.UBTC.MGOA, IntObj) +External(_SB.UBTC.MGOB, IntObj) +External(_SB.UBTC.MGOC, IntObj) +External(_SB.UBTC.MGOD, IntObj) +External(_SB.UBTC.MGOE, IntObj) +External(_SB.UBTC.MGOF, IntObj) + +External(_SB.UBTC.CCI0, IntObj) +External(_SB.UBTC.CCI1, IntObj) +External(_SB.UBTC.CCI2, IntObj) +External(_SB.UBTC.CCI3, IntObj) diff --git a/src/ec/starlabs/merlin/chip.h b/src/ec/starlabs/merlin/chip.h new file mode 100644 index 0000000..cd7eb9b --- /dev/null +++ b/src/ec/starlabs/merlin/chip.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _EC_STARLABS_ITE_CHIP_H +#define _EC_STARLABS_ITE_CHIP_H + +struct ec_starlabs_merlin_config { + u8 cpuhot_limit; /* temperature in °C which asserts PROCHOT# */ +}; + +#endif /* _EC_STARLABS_IT5570_CHIP_H */ diff --git a/src/ec/starlabs/merlin/ec.c b/src/ec/starlabs/merlin/ec.c new file mode 100644 index 0000000..062f3ba --- /dev/null +++ b/src/ec/starlabs/merlin/ec.c @@ -0,0 +1,248 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/pnp.h> +#include <ec/acpi/ec.h> +#include <option.h> +#include <pc80/keyboard.h> + +#include "chip.h" +#include "ec.h" +#include "ecdefs.h" + +u16 it_get_version(void) +{ + return (ec_read(0x00) << 8) | ec_read(0x01); +} + +static void merlin_init(struct device *dev) +{ + if (!dev->enabled) + return; + + /* + * The address/data IO port pair for the ite EC are configurable + * through the EC domain and are fixed by the EC's firmware blob. If + * the value(s) passed through the "dev" structure don't match the + * expected values then output severe warnings. + */ + if (dev->path.pnp.port != ITE_FIXED_ADDR) { + printk(BIOS_ERR, "ITE: Incorrect ports defined in devicetree.cb.\n"); + printk(BIOS_ERR, "ITE: Serious operational issues will arise.\n"); + return; + } + + u8 chipid1 = pnp_read_index(dev->path.pnp.port, ITE_CHIPID1); + u8 chipid2 = pnp_read_index(dev->path.pnp.port, ITE_CHIPID2); + if (chipid1 != ITE_CHIPID1_VAL || chipid2 != ITE_CHIPID2_VAL) { + printk(BIOS_DEBUG, "ITE: Device not found.\n"); + return; + } + + printk(BIOS_DEBUG, "ITE: Initializing keyboard.\n"); + pc_keyboard_init(NO_AUX_DEVICE); + + /* + * Restore settings from CMOS into EC RAM: + * + * kbl_timeout + * fn_ctrl_swap + * max_charge + * fan_mode + * fn_lock_state + * trackpad_state + * kbl_brightness + * kbl_state + * + */ + + /* + * Keyboard Backlight Timeout + * + * Setting: kbl_timeout + * + * Values: 30 Seconds, 1 Minute, 3 Minutes, 5 Minutes, Never + * Default: 30 Seconds + * + */ + switch (get_uint_option("kbl_timeout", 0)) { + case MIN_1: + ec_write(ECRAM_KBL_TIMEOUT, MIN_1); + break; + case MIN_3: + ec_write(ECRAM_KBL_TIMEOUT, MIN_3); + break; + case MIN_5: + ec_write(ECRAM_KBL_TIMEOUT, MIN_5); + break; + case NEVER: + ec_write(ECRAM_KBL_TIMEOUT, NEVER); + break; + default: + ec_write(ECRAM_KBL_TIMEOUT, SEC_30); + break; + } + + /* + * Fn Ctrl Reverse + * + * Setting: fn_ctrl_swap + * + * Values: Enabled, Disabled + * Default: Disabled + * + */ + switch (get_uint_option("fn_ctrl_swap", 0)) { + case CTRL_FN: + ec_write(ECRAM_FN_CTRL_REVERSE, CTRL_FN); + break; + default: + ec_write(ECRAM_FN_CTRL_REVERSE, FN_CTRL); + break; + } + + /* + * Maximum Charge Level + * + * Setting: max_charge + * + * Values: 60%, 80%, 100% + * Default: 100% + * + */ + switch (get_uint_option("max_charge", 0)) { + case CHARGE_80: + ec_write(ECRAM_MAX_CHARGE, CHARGE_80); + break; + case CHARGE_60: + ec_write(ECRAM_MAX_CHARGE, CHARGE_60); + break; + default: + ec_write(ECRAM_MAX_CHARGE, CHARGE_100); + break; + } + + /* + * Fan Mode + * + * Setting: fan_mode + * + * Values: Quiet, Normal, Aggressive + * Default: Normal + * + */ + switch (get_uint_option("fan_mode", 0)) { + case FAN_AGGRESSIVE: + ec_write(ECRAM_FAN_MODE, FAN_AGGRESSIVE); + break; + case FAN_QUIET: + ec_write(ECRAM_FAN_MODE, FAN_QUIET); + break; + default: + ec_write(ECRAM_FAN_MODE, FAN_NORMAL); + break; + } + + /* + * Function Lock + * + * Setting: fn_lock_state + * + * Values: Locked, Unlocked + * Default: Locked + * + */ + switch (get_uint_option("fn_lock_state", 0)) { + case UNLOCKED: + ec_write(ECRAM_FN_LOCK_STATE, UNLOCKED); + break; + default: + ec_write(ECRAM_FN_LOCK_STATE, LOCKED); + break; + } + + /* + * Trackpad State + * + * Setting: trackpad_state + * + * Values: Enabled, Disabled + * Default: Enabled + * + */ + switch (get_uint_option("trackpad_state", 0)) { + case TRACKPAD_DISABLED: + ec_write(ECRAM_TRACKPAD_STATE, TRACKPAD_DISABLED); + break; + default: + ec_write(ECRAM_TRACKPAD_STATE, TRACKPAD_ENABLED); + break; + } + + /* + * Keyboard Backlight Brightness + * + * Setting: kbl_brightness + * + * Values: Off, Low, High + * Default: Low + * + */ + switch (get_uint_option("kbl_brightness", 0)) { + case KBL_OFF: + ec_write(ECRAM_KBL_BRIGHTNESS, KBL_OFF); + break; +#if CONFIG(EC_STARLABS_KBL_LEVELS) + case KBL_HIGH: + ec_write(ECRAM_KBL_BRIGHTNESS, KBL_HIGH); + break; + default: + ec_write(ECRAM_KBL_BRIGHTNESS, KBL_LOW); + break; +#else + default: + ec_write(ECRAM_KBL_BRIGHTNESS, KBL_ON); + break; +#endif + } + + /* + * Keyboard Backlight State + * + * Setting: kbl_state + * + * Values: Off, On + * Default: On + * + */ + switch (get_uint_option("kbl_state", 0)) { + case KBL_DISABLED: + ec_write(ECRAM_KBL_STATE, KBL_DISABLED); + break; + default: + ec_write(ECRAM_KBL_STATE, KBL_ENABLED); + break; + } +} + +static struct device_operations ops = { + .init = merlin_init, + .read_resources = noop_read_resources, + .set_resources = noop_set_resources, +}; + +static struct pnp_info pnp_dev_info[] = { + { NULL, 0, 0, 0, } +}; + +static void enable_dev(struct device *dev) +{ + pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info); +} + +struct chip_operations ec_starlabs_merlin_ops = { + CHIP_NAME("ITE ITE EC") + .enable_dev = enable_dev +}; diff --git a/src/ec/starlabs/merlin/ec.h b/src/ec/starlabs/merlin/ec.h new file mode 100644 index 0000000..0a9b3aa --- /dev/null +++ b/src/ec/starlabs/merlin/ec.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * EC communication interface for ITE ITE Embedded Controller. + */ + +#ifndef _EC_STARLABS_ITE_H +#define _EC_STARLABS_ITE_H + +/* + * Define the expected value of the PNP base address that is fixed through + * the BADRSEL register controlled within the EC domain by the binary blob. + */ +#define ITE_FIXED_ADDR 0x4e + +/* Logical device number (LDN) assignments. */ +#define ITE_SP1 0x01 /* Com1 */ +#define ITE_SP2 0x02 /* Com2 */ +#define ITE_SWUC 0x04 /* System Wake-Up */ +#define ITE_KBCM 0x05 /* PS/2 mouse */ +#define ITE_KBCK 0x06 /* PS/2 keyboard */ +#define ITE_IR 0x0a /* Consumer IR */ +#define ITE_SMFI 0x0f /* Shared Memory/Flash Interface */ +#define ITE_RTCT 0x10 /* RTC-like Timer */ +#define ITE_PMC1 0x11 /* Power Management Channel 1 */ +#define ITE_PMC2 0x12 /* Power Management Channel 2 */ +#define ITE_SSPI 0x13 /* Serial Peripheral Interface */ +#define ITE_PECI 0x14 /* Platform EC Interface */ +#define ITE_PMC3 0x17 /* Power Management Channel 3 */ +#define ITE_PMC4 0x18 /* Power Management Channel 4 */ +#define ITE_PMC5 0x19 /* Power Management Channel 5 */ + +/* Host domain registers. */ +#define ITE_CHIPID1 0x20 /* Device ID register 1 */ +#define ITE_CHIPID2 0x21 /* Device ID register 2 */ + +/* + * CMOS Settings + */ + +/* Keyboard Backlight Timeout */ +#define SEC_30 0x00 +#define MIN_1 0x01 +#define MIN_3 0x02 +#define MIN_5 0x03 +#define NEVER 0x04 + +/* Fn Ctrl Swap */ +#define FN_CTRL 0x00 +#define CTRL_FN 0x01 + +/* Max Charge Setting */ +#define CHARGE_100 0x00 +#define CHARGE_80 0xbb +#define CHARGE_60 0xaa + +/* Fan Mode Setting */ +#define FAN_NORMAL 0x00 +#define FAN_AGGRESSIVE 0xbb +#define FAN_QUIET 0xaa + +/* Fn Lock State */ +#define UNLOCKED 0x00 +#define LOCKED 0x01 + +/* Trackpad State */ +#define TRACKPAD_ENABLED 0x00 +#define TRACKPAD_DISABLED 0x22 + +/* Keyboard Brightness Levels */ +#define KBL_ON 0xdd +#define KBL_OFF 0xcc +#define KBL_LOW 0xbb +#define KBL_HIGH 0xaa + +/* Keyboard Backlight State */ +#define KBL_DISABLED 0x00 +#define KBL_ENABLED 0xaa + +u16 it_get_version(void); + +#endif diff --git a/src/ec/starlabs/merlin/variants/cml/ecdefs.h b/src/ec/starlabs/merlin/variants/cml/ecdefs.h new file mode 100644 index 0000000..f53c601 --- /dev/null +++ b/src/ec/starlabs/merlin/variants/cml/ecdefs.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * EC communication interface for ITE ITE Embedded Controller. + */ + +#ifndef _EC_STARLABS_ITE_CFG_H +#define _EC_STARLABS_ITE_CFG_H + +/* IT5570 chip ID byte values. */ +#define ITE_CHIPID1_VAL 0x89 +#define ITE_CHIPID2_VAL 0x87 + +/* EC RAM offsets. */ +#define ECRAM_KBL_TIMEOUT 0x07 +#define ECRAM_FN_CTRL_REVERSE 0x08 +#define ECRAM_FAN_MODE 0x09 +#define ECRAM_MAX_CHARGE 0x10 +#define ECRAM_TRACKPAD_STATE 0x14 +#define ECRAM_KBL_STATE 0x18 +#define ECRAM_KBL_BRIGHTNESS 0x19 +#define ECRAM_FN_LOCK_STATE 0x2c + +#endif diff --git a/src/ec/starlabs/merlin/variants/cml/emem.asl b/src/ec/starlabs/merlin/variants/cml/emem.asl new file mode 100644 index 0000000..0578e45 --- /dev/null +++ b/src/ec/starlabs/merlin/variants/cml/emem.asl @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +OperationRegion (ECF2, EmbeddedControl, 0x00, 0xFF) +Field (ECF2, ByteAcc, Lock, Preserve) +{ + Offset(0x00), + ECMV, 8, // Major Version Number + ECSV, 8, // Minor Version Number + KBVS, 8, // Keyboard Controller Version + ECTV, 8, // Test Version Number + FRMF, 8, // Froce Mirror Flag + TXEL, 8, // TXE Lock + SSIT, 8, // Show_Setup_Items + KLTE, 8, // Keyboard Backlight Timeout + FCLA, 8, // Fn Ctrl Reverse + FANM, 8, // Fan Mode + + Offset(0x0a), + P0MV, 8, // PD Port 0 Major Version + P0SV, 8, // PD Port 0 Minor Version + P1MV, 8, // PD Port 1 Major Version + P1SV, 8, // PD Port 1 Minor Version + + Offset(0x10), + BFCP, 8, // Battery Full Charge Percentage + CDEV, 8, // Control Device + OSFG, 8, // OS Flag + + Offset(0x14), + TPLA, 8, // Trackpad State + AFG3, 8, // After G3 + CLTP, 8, // Close Trackpad + WKOL, 8, // Wake on Lid + KLSE, 8, // Keyboard Backlight State + KLBE, 8, // Keyboard Backlight Brightness + + Offset(0x1a), + CWFU, 8, // CW2015 Full + + Offset(0x1c), + WIFI, 8, // WiFi Enable + + Offset(0x22), + ECT0, 8, // EC Build Time 0 + ECT1, 8, // EC Build Time 1 + ECT2, 8, // EC Build Time 2 + ECT3, 8, // EC Build Time 3 + ECT4, 8, // EC Build Time 4 + ECT5, 8, // EC Build Time 5 + ECT6, 8, // EC Build Time 6 + ECT7, 8, // EC Build Time 7 + ECT8, 8, // EC Build Time 8 + ECT9, 8, // EC Build Time 9 + FLKA, 8, // Function Lock State + MICF, 8, // Mic Flag + MUTF, 8, // Mute Flag + BC12, 8, // BC12 Flag + + Offset(0x30), + STEF, 8, // Sensor T Error F + ECD0, 8, // EC Build Date 0 + ECD1, 8, // EC Build Date 1 + ECD2, 8, // EC Build Date 2 + ECD3, 8, // EC Build Date 3 + ECD4, 8, // EC Build Date 4 + ECD5, 8, // EC Build Date 5 + ECD6, 8, // EC Build Date 6 + ECD7, 8, // EC Build Date 7 + ECD8, 8, // EC Build Date 8 + ECD9, 8, // EC Build Date 9 + + Offset(0x4c), + PJN0, 8, // Project Name 0 + PJN1, 8, // Project Name 1 + PJN2, 8, // Project Name 2 + PJN3, 8, // Project Name 3 + + Offset(0x62), + TSE2, 8, // Sensor 2 Temperature + SENF, 8, // Sensor F + TSHT, 8, // Thermal Sensor High Trip Point + TSLT, 8, // Thermal Sensor Low Trip Point + THER, 8, // Thermal Source + + Offset(0x70), + CPUT, 8, // PECI CPU Temperature + PMXT, 8, // PLMX Temperature + CHAR, 8, // Charger Temperature + + Offset(0x7f), + LSTE, 1, // Lid Status + , 7, // Reserved + + Offset(0x80), + ECPS, 8, // AC & Battery status + B1MN, 8, // Battery Model Number Code + B1SN, 16, // Battery Serial Number + B1DC, 16, // Battery Design Capacity + B1DV, 16, // Battery Design Voltage + B1FC, 16, // Battery Last Full Charge Capacity + B1TP, 16, // Battery Trip Point + B1ST, 8, // Battery State + B1PR, 16, // Battery Present Rate + B1RC, 16, // Battery Remaining Capacity + B1PV, 16, // Battery Present Voltage + BPRP, 8, // Battery Remaining percentage + BT1A, 8, // Bt1 ASOC + BT1T, 16, // Bt1 Temperature + BT1C, 8, // Bt1 Control + + // Unicorn - doesn't actually exist + Offset(0x9d), + OPWE, 8, // OPM write to EC flag for UCSI + // Unicorn - doesn't actually exist + + Offset(0xa0), + UCSV, 16, // UCSI DS Version + UCSD, 16, // UCSI DS Reserved + CCI0, 8, // UCSI DS CCI 0 + CCI1, 8, // UCSI DS CCI 1 + CCI2, 8, // UCSI DS CCI 2 + CCI3, 8, // UCSI DS CCI 3 + CTL0, 8, // UCSI DS Control 0 + CTL1, 8, // UCSI DS Control 0 + CTL2, 8, // UCSI DS Control 0 + CTL3, 8, // UCSI DS Control 0 + CTL4, 8, // UCSI DS Control 0 + CTL5, 8, // UCSI DS Control 0 + CTL6, 8, // UCSI DS Control 0 + CTL7, 8, // UCSI DS Control 0 + + Offset(0xb0), + MGI0, 8, // UCSI DS MGI 0 + MGI1, 8, // UCSI DS MGI 1 + MGI2, 8, // UCSI DS MGI 2 + MGI3, 8, // UCSI DS MGI 3 + MGI4, 8, // UCSI DS MGI 4 + MGI5, 8, // UCSI DS MGI 5 + MGI6, 8, // UCSI DS MGI 6 + MGI7, 8, // UCSI DS MGI 7 + MGI8, 8, // UCSI DS MGI 8 + MGI9, 8, // UCSI DS MGI 9 + MGIA, 8, // UCSI DS MGI A + MGIB, 8, // UCSI DS MGI B + MGIC, 8, // UCSI DS MGI C + MGID, 8, // UCSI DS MGI D + MGIE, 8, // UCSI DS MGI E + MGIF, 8, // UCSI DS MGI F + + Offset(0xc0), + MGO0, 8, // UCSI DS MGO 0 + MGO1, 8, // UCSI DS MGO 1 + MGO2, 8, // UCSI DS MGO 2 + MGO3, 8, // UCSI DS MGO 3 + MGO4, 8, // UCSI DS MGO 4 + MGO5, 8, // UCSI DS MGO 5 + MGO6, 8, // UCSI DS MGO 6 + MGO7, 8, // UCSI DS MGO 7 + MGO8, 8, // UCSI DS MGO 8 + MGO9, 8, // UCSI DS MGO 9 + MGOA, 8, // UCSI DS MGO A + MGOB, 8, // UCSI DS MGO B + MGOC, 8, // UCSI DS MGO C + MGOD, 8, // UCSI DS MGO D + MGOE, 8, // UCSI DS MGO E + MGOF, 8, // UCSI DS MGO F + + Offset(0xe6), + ECWD, 16, // EC Wakeup Delay + ECWE, 8, // EC Wakeup Enable +} diff --git a/src/ec/starlabs/merlin/variants/cml/events.asl b/src/ec/starlabs/merlin/variants/cml/events.asl new file mode 100644 index 0000000..9333c9e --- /dev/null +++ b/src/ec/starlabs/merlin/variants/cml/events.asl @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method (_Q0D, 0, NotSerialized) // Event: Lid Opened +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0C, 0, NotSerialized) // Event: Lid Closed +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_QA0, 0, NotSerialized) // Event: AC Power Connected +{ + Notify (BAT0, 0x81) + Notify (ADP1, 0x80) +} + +Method (_Q0B, 0, NotSerialized) // Event: AC Power Disconnected +{ + Notify (BAT0, 0x81) + Notify (BAT0, 0x80) +} + +Method (_Q06, 0, NotSerialized) // Event: Backlight Brightness Down +{ + ^^^^HIDD.HPEM (20) +} + +Method (_Q07, 0, NotSerialized) // Event: Backlight Brightness Up +{ + ^^^^HIDD.HPEM (19) +} + +Method (_Q08, 0, NotSerialized) // Event: Function Lock +{ + FLKS = FLKA +} + +Method (_Q04, 0, NotSerialized) // Event: Trackpad Lock +{ + TPLS = TPLA +} +// +// TODO: +// Below Q Events need to be added +// +Method (_Q11) // Event: Keyboard Backlight Brightness +{ + KLBC = KLBE +} + +Method (_Q99, 0, NotSerialized) // Event: Airplane Mode +{ + ^^^^HIDD.HPEM (8) +} + +Method (_QD5, 0, NotSerialized) // Event: 10 Second Power Button Pressed +{ + Notify (HIDD, 0xCE) +} + +Method (_QD6, 0, NotSerialized) // Event: 10 Second Power Button Released +{ + Notify (HIDD, 0xCF) +} + +Method (_Q22, 0, NotSerialized) // Event: CHARGER_T +{ + Store ("EC: CHARGER_T", Debug) +} + +Method (_Q40, 0, NotSerialized) // Event: AC and DC Power +{ + SMB2 = 0xC6 +} + +Method (_Q41, 0, NotSerialized) // Event: Battery Charge between 0% and 20% +{ + SMB2 = 0xC7 +} + +Method (_Q42, 0, NotSerialized) // Event: Battery Charge between 20% and 60% +{ + SMB2 = 0xC8 +} + +Method (_Q43, 0, NotSerialized) // Event: Battery Charge between 60% and 100% +{ + SMB2 = 0xC9 +} + +Method (_Q44, 0, NotSerialized) // Event: AC Power Only +{ + SMB2 = 0xCA +} + +Method (_Q80, 0, NotSerialized) // Event: Volume Up +{ + Store ("EC: VOLUME_UP", Debug) +} + +Method (_Q81, 0, NotSerialized) // Event: Volume Down +{ + Store ("EC: VOLUME_DOWN", Debug) +} + +Method (_Q54, 0, NotSerialized) // Event: Power Button Press +{ + Store ("EC: PWRBTN", Debug) +} + +Method (_QF0, 0, NotSerialized) // Event: Temperature Report +{ + Store ("EC: Temperature Report", Debug) +} + +Method (_QF1, 0, NotSerialized) // Event: Temperature Trigger +{ + // Notify (SEN3, 0x90) +} + +/* + * The below events are unique to this platform. + */ + + +Method (_Q02, 0, NotSerialized) // Event: APP +{ + Store ("EC: APP", Debug) +} + +Method (_Q82, 0, NotSerialized) // Event: MIC +{ + Store ("EC: MIC", Debug) +} + +Method (_Q83, 0, NotSerialized) // Event: MUTE +{ + Store ("EC: MUTE", Debug) +} diff --git a/src/ec/starlabs/merlin/variants/kbl/ecdefs.h b/src/ec/starlabs/merlin/variants/kbl/ecdefs.h new file mode 100644 index 0000000..e4e9e3f --- /dev/null +++ b/src/ec/starlabs/merlin/variants/kbl/ecdefs.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * EC communication interface for ITE ITE Embedded Controller. + */ + +#ifndef _EC_STARLABS_ITE_CFG_H +#define _EC_STARLABS_ITE_CFG_H + +/* IT5570 chip ID byte values. */ +#define ITE_CHIPID1_VAL 0x89 +#define ITE_CHIPID2_VAL 0x87 + +/* EC RAM offsets. */ +#define ECRAM_TRACKPAD_STATE 0x14 +#define ECRAM_KBL_STATE 0x18 +#define ECRAM_KBL_BRIGHTNESS 0x19 +#define ECRAM_KBL_TIMEOUT 0x1a +#define ECRAM_FN_LOCK_STATE 0x2c +#define ECRAM_FAN_MODE 0x42 +#define ECRAM_FN_CTRL_REVERSE 0x43 +#define ECRAM_MAX_CHARGE 0xff /* TODO: Add */ + +#endif diff --git a/src/ec/starlabs/merlin/variants/kbl/emem.asl b/src/ec/starlabs/merlin/variants/kbl/emem.asl new file mode 100644 index 0000000..e8caa84f --- /dev/null +++ b/src/ec/starlabs/merlin/variants/kbl/emem.asl @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +OperationRegion (ECF2, EmbeddedControl, 0x00, 0xFF) +Field (ECF2, ByteAcc, Lock, Preserve) +{ + Offset(0x00), + ECMV, 8, // Major Version Number + ECSV, 8, // Minor Version Number + KBVS, 8, // Keyboard Controller Version + ECTV, 8, // Test Version Number + FRMF, 8, // Froce Mirror Flag + + Offset(0x0c), + ECBY, 8, // Build Year + ECBM, 8, // Build Month + ECBD, 8, // Build Day + ECBI, 8, // Build Index + + Offset(0x10), + CPWR, 8, // Control Power + CDEV, 8, // Control Device + OSFG, 8, // OS Flag + + Offset(0x14), + TPLA, 8, // Trackpad State + + Offset(0x18), + KLSE, 8, // Keyboard Backlight State + KLBE, 8, // Keyboard Backlight Brightness + KLTE, 8, // Keyboard Backlight Timeout + + Offset(0x20), + TCHC, 8, // Thermal Charge CMD + TCHF, 8, // Thermal Charge Flag + + Offset(0x2c), + FLKA, 8, // Function Lock State + + Offset(0x30), + STEF, 8, // Sensor T Error F + + Offset(0x40), + SHIP, 8, // Shipping Mode Flag + + Offset(0x42), + FANM, 8, // Fan Mode + KBFL, 8, // Keyboard Flag + + Offset(0x50), + CHRA, 16, // Charge Rate + CHIC, 16, // Charge Input Current + CHVL, 16, // Charge Vlot + CHOP, 16, // Charge Option + + Offset(0x62), + TSE2, 8, // Sensor 2 Temperature + SENF, 8, // Sensor F + TSHT, 8, // Thermal Sensor High Trip Point + TSLT, 8, // Thermal Sensor Low Trip Point + THER, 8, // Thermal Source + + + Offset(0x70), + CPUT, 8, // PECI CPU Temperature + PMXT, 8, // PLMX Temperature + CHAR, 8, // Charger Temperature + + Offset(0x7e), + OCTF, 8, // OEM Control Flag + LSTE, 1, // Lid Status + , 7, // Reserved + + Offset(0x80), + ECPS, 8, // AC & Battery status + B1MN, 8, // Battery Model Number Code + B1SN, 16, // Battery Serial Number + B1DC, 16, // Battery Design Capacity + B1DV, 16, // Battery Design Voltage + B1FC, 16, // Battery Last Full Charge Capacity + B1TP, 16, // Battery Trip Point + B1ST, 8, // Battery State + B1PR, 16, // Battery Present Rate + B1RC, 16, // Battery Remaining Capacity + B1PV, 16, // Battery Present Voltage + BPRP, 8, // Battery Remaining percentage + BT1A, 8, // Bt1 ASOC + + // Unicorn - doesn't actually exist + Offset(0x9d), + OPWE, 8, // OPM write to EC flag for UCSI + // Unicorn - doesn't actually exist + + Offset(0xbf), + EJ8A, 8, // EJ898A Firmware Version + + Offset(0xc0), + MGI0, 8, // UCSI DS MGI 0 + MGI1, 8, // UCSI DS MGI 1 + MGI2, 8, // UCSI DS MGI 2 + MGI3, 8, // UCSI DS MGI 3 + MGI4, 8, // UCSI DS MGI 4 + MGI5, 8, // UCSI DS MGI 5 + MGI6, 8, // UCSI DS MGI 6 + MGI7, 8, // UCSI DS MGI 7 + MGI8, 8, // UCSI DS MGI 8 + MGI9, 8, // UCSI DS MGI 9 + MGIA, 8, // UCSI DS MGI A + MGIB, 8, // UCSI DS MGI B + MGIC, 8, // UCSI DS MGI C + MGID, 8, // UCSI DS MGI D + MGIE, 8, // UCSI DS MGI E + MGIF, 8, // UCSI DS MGI F + + Offset(0xd0), + MGO0, 8, // UCSI DS MGO 0 + MGO1, 8, // UCSI DS MGO 1 + MGO2, 8, // UCSI DS MGO 2 + MGO3, 8, // UCSI DS MGO 3 + MGO4, 8, // UCSI DS MGO 4 + MGO5, 8, // UCSI DS MGO 5 + MGO6, 8, // UCSI DS MGO 6 + MGO7, 8, // UCSI DS MGO 7 + MGO8, 8, // UCSI DS MGO 8 + MGO9, 8, // UCSI DS MGO 9 + MGOA, 8, // UCSI DS MGO A + MGOB, 8, // UCSI DS MGO B + MGOC, 8, // UCSI DS MGO C + MGOD, 8, // UCSI DS MGO D + MGOE, 8, // UCSI DS MGO E + MGOF, 8, // UCSI DS MGO F + + Offset(0xe0), + UCSV, 16, // UCSI DS Version + UCSD, 16, // UCSI DS Reserved + CCI0, 8, // UCSI DS CCI 0 + CCI1, 8, // UCSI DS CCI 1 + CCI2, 8, // UCSI DS CCI 2 + CCI3, 8, // UCSI DS CCI 3 + CTL0, 8, // UCSI DS Control 0 + CTL1, 8, // UCSI DS Control 0 + CTL2, 8, // UCSI DS Control 0 + CTL3, 8, // UCSI DS Control 0 + CTL4, 8, // UCSI DS Control 0 + CTL5, 8, // UCSI DS Control 0 + CTL6, 8, // UCSI DS Control 0 + CTL7, 8, // UCSI DS Control 0 + + Offset(0xf0), + P0SD, 8, // PD Port Status DD + P0S4, 8, // PD Port Status 4 + P0S5, 8, // PD Port Status 5 + P0SE, 8, // PD Port Status E + P0SA, 8, // PD Port Status 10 + P0SB, 8, // PD Port Status 11 + + Offset(0xfd), + STCD, 8, // Shutdown Code + EJ8R, 8, // EJ898A Need Reboot + // TODO: + // Causes build failure, but 0xff is in range + // EJ8E, 8, // EJ898A Error +} diff --git a/src/ec/starlabs/merlin/variants/kbl/events.asl b/src/ec/starlabs/merlin/variants/kbl/events.asl new file mode 100644 index 0000000..d546632 --- /dev/null +++ b/src/ec/starlabs/merlin/variants/kbl/events.asl @@ -0,0 +1,275 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method (_Q0D, 0, NotSerialized) // Event: Lid Opened +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0C, 0, NotSerialized) // Event: Lid Closed +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0A, 0, NotSerialized) // Event: AC Power Connected +{ + Notify (BAT0, 0x81) + Notify (ADP1, 0x80) +} + +Method (_Q0B, 0, NotSerialized) // Event: AC Power Disconnected +{ + Notify (BAT0, 0x81) + Notify (BAT0, 0x80) +} + +Method (_Q06, 0, NotSerialized) // Event: Backlight Brightness Down +{ + ^^^^HIDD.HPEM (20) +} + +Method (_Q07, 0, NotSerialized) // Event: Backlight Brightness Up +{ + ^^^^HIDD.HPEM (19) +} + +Method (_Q08, 0, NotSerialized) // Event: Function Lock +{ + FLKS = FLKA +} +// +// TODO: +// Below Q Events need to be added +// +// Method (_Q04, 0, NotSerialized) // Event: Trackpad Lock +// { +// TPLS = TPLA +// } +// +// Method (_Q__, 0, NotSerialized) // Event: Keyboard Backlight Brightness +// { +// KLBC = KLBE +// KLSC = KLSE +// } +// + +Method (_Q99, 0, NotSerialized) // Event: Airplane Mode +{ + ^^^^HIDD.HPEM (8) +} + +Method (_QD5, 0, NotSerialized) // Event: 10 Second Power Button Pressed +{ + Notify (HIDD, 0xCE) +} + +Method (_QD6, 0, NotSerialized) // Event: 10 Second Power Button Released +{ + Notify (HIDD, 0xCF) +} + +Method (_Q22, 0, NotSerialized) // Event: CHARGER_T +{ + Store ("EC: CHARGER_T", Debug) +} + +// +// TODO: +// Below Q Events need to be added +// +// Method (_Q40, 0, NotSerialized) // Event: AC and DC Power +// { +// SMB2 = 0xC6 +// } +// +// Method (_Q41, 0, NotSerialized) // Event: Battery Charge between 0% and 20% +// { +// SMB2 = 0xC7 +// } +// +// Method (_Q42, 0, NotSerialized) // Event: Battery Charge between 20% and 60% +// { +// SMB2 = 0xC8 +// } +// +// Method (_Q43, 0, NotSerialized) // Event: Battery Charge between 60% and 100% +// { +// SMB2 = 0xC9 +// } +// +// Method (_Q44, 0, NotSerialized) // Event: AC Power Only +// { +// SMB2 = 0xCA +// } + +Method (_Q80, 0, NotSerialized) // Event: Volume Up +{ + Store ("EC: VOLUME_UP", Debug) +} + +Method (_Q81, 0, NotSerialized) // Event: Volume Down +{ + Store ("EC: VOLUME_DOWN", Debug) +} + +Method (_Q54, 0, NotSerialized) // Event: Power Button Press +{ + Store ("EC: PWRBTN", Debug) +} + +Method (_QF0, 0, NotSerialized) // Event: Temperature Report +{ + Store ("EC: Temperature Report", Debug) +} + +Method (_QF1, 0, NotSerialized) // Event: Temperature Trigger +{ + // Notify (SEN3, 0x90) +} + +/* + * The below events are unique to this platform. + */ + + +Method (_Q85, 0, NotSerialized) // Event: HOME +{ + Store ("EC: HOME", Debug) +} + +Method (_Q79, 0, NotSerialized) // Event: USB Type-C +{ + Store ("EC: USB Type-C", Debug) + UCEV() +} + +Method (_Q0E, 0, NotSerialized) // Event: SLEEP +{ + Store ("EC: SLEEP", Debug) +} + +Method (_Q13, 0, NotSerialized) // Event: BRIGHTNESS +{ + Store ("EC: BRIGHTNESS", Debug) +} + +Method (_Q20, 0, NotSerialized) // Event: CPU_T +{ + Store ("EC: CPU_T", Debug) +} + +Method (_Q21, 0, NotSerialized) // Event: SKIN_T +{ + Store ("EC: SKIN_T", Debug) +} + +Method (_Q30, 0, NotSerialized) // Event: THROT_OFF +{ + Store ("EC: THROT_OFF", Debug) +} + +Method (_Q31, 0, NotSerialized) // Event: THROT_LV1 +{ + Store ("EC: THROT_LV1", Debug) +} + +Method (_Q32, 0, NotSerialized) // Event: THROT_LV2 +{ + Store ("EC: THROT_LV2", Debug) +} + +Method (_Q33, 0, NotSerialized) // Event: THROT_LV3 +{ + Store ("EC: THROT_LV3", Debug) +} + +Method (_Q34, 0, NotSerialized) // Event: THROT_LV4 +{ + Store ("EC: THROT_LV4", Debug) +} + +Method (_Q35, 0, NotSerialized) // Event: THROT_LV5 +{ + Store ("EC: THROT_LV5", Debug) +} + +Method (_Q36, 0, NotSerialized) // Event: THROT_LV6 +{ + Store ("EC: THROT_LV6", Debug) +} + +Method (_Q37, 0, NotSerialized) // Event: THROT_LV7 +{ + Store ("EC: THROT_LV7", Debug) +} + +Method (_Q38, 0, NotSerialized) // Event: CPU_DN_SPEED +{ + Store ("EC: CPU_DN_SPEED", Debug) +} + +Method (_Q3C, 0, NotSerialized) // Event: CPU_UP_SPEED +{ + Store ("EC: CPU_UP_SPEED", Debug) +} + +Method (_Q3D, 0, NotSerialized) // Event: CPU_TURBO_OFF +{ + Store ("EC: CPU_TURBO_OFF", Debug) +} + +Method (_Q3E, 0, NotSerialized) // Event: CPU_TURBO_ON +{ + Store ("EC: CPU_TURBO_ON", Debug) +} + +Method (_Q3F, 0, NotSerialized) // Event: SHUTDOWN +{ + Store ("EC: SHUTDOWN", Debug) +} + +Method (_Q01, 0, NotSerialized) // Event: F1 Hot Key +{ + Store ("EC: F1", Debug) +} + +Method (_Q02, 0, NotSerialized) // Event: F2 Hot Key +{ + Store ("EC: F2", Debug) +} + +Method (_Q03, 0, NotSerialized) // Event: F3 Hot Key +{ + Store ("EC: F3", Debug) +} + +Method (_Q04, 0, NotSerialized) // Event: F4 Hot Key +{ + Store ("EC: F4", Debug) +} + +Method (_Q05, 0, NotSerialized) // Event: F5 Hot Key +{ + Store ("EC: F5", Debug) +} + +Method (_Q09, 0, NotSerialized) // Event: F9 Hot Key +{ + Store ("EC: F9", Debug) +} + +Method (_Q10, 0, NotSerialized) // Event: F10 Hot Key +{ + Store ("EC: F10", Debug) +} + +Method (_Q11, 0, NotSerialized) // Event: F11 Hot Key +{ + Store ("EC: F11", Debug) +} + +Method (_Q12, 0, NotSerialized) // Event: F12 Hot Key +{ + Store ("EC: F6", Debug) +} diff --git a/src/ec/starlabs/merlin/variants/merlin/ecdefs.h b/src/ec/starlabs/merlin/variants/merlin/ecdefs.h new file mode 100644 index 0000000..6d7b0ea --- /dev/null +++ b/src/ec/starlabs/merlin/variants/merlin/ecdefs.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * EC communication interface for ITE Embedded Controller. + */ + +#ifndef _EC_STARLABS_ITE_CFG_H +#define _EC_STARLABS_ITE_CFG_H + +/* IT5570 chip ID byte values. */ +#define ITE_CHIPID1_VAL 0x55 +#define ITE_CHIPID2_VAL 0x70 + +/* EC RAM offsets. */ +#define ECRAM_FN_CTRL_REVERSE 0x30 +#define ECRAM_FN_LOCK_STATE 0x31 +#define ECRAM_TRACKPAD_STATE 0x32 +#define ECRAM_KBL_BRIGHTNESS 0x33 +#define ECRAM_KBL_STATE 0x34 +#define ECRAM_KBL_TIMEOUT 0x35 +#define ECRAM_FAN_MODE 0x50 +#define ECRAM_MAX_CHARGE 0x51 + +#endif diff --git a/src/ec/starlabs/merlin/variants/merlin/emem.asl b/src/ec/starlabs/merlin/variants/merlin/emem.asl new file mode 100644 index 0000000..513da6a --- /dev/null +++ b/src/ec/starlabs/merlin/variants/merlin/emem.asl @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +OperationRegion (ECF2, EmbeddedControl, 0x00, 0xFF) +Field (ECF2, ByteAcc, Lock, Preserve) +{ + Offset(0x00), // Versions: + SKUI, 8, // SKU ID + BDID, 8, // Board ID + ECMV, 8, // Major Version Number + ECSV, 8, // Minor Version Number + KBVS, 8, // Keyboard Controller Version + ECTV, 8, // Test Version Number + OSFG, 8, // OS Flag + + Offset(0x10), // Build Time: + ECT0, 8, // EC Build Time 0 + ECT1, 8, // EC Build Time 1 + ECT2, 8, // EC Build Time 2 + ECT3, 8, // EC Build Time 3 + ECT4, 8, // EC Build Time 4 + ECT5, 8, // EC Build Time 5 + ECT6, 8, // EC Build Time 6 + ECT7, 8, // EC Build Time 7 + ECT8, 8, // EC Build Time 8 + ECT9, 8, // EC Build Time 9 + + Offset(0x20), // Build Date: + ECD0, 8, // EC Build Date 0 + ECD1, 8, // EC Build Date 1 + ECD2, 8, // EC Build Date 2 + ECD3, 8, // EC Build Date 3 + ECD4, 8, // EC Build Date 4 + ECD5, 8, // EC Build Date 5 + ECD6, 8, // EC Build Date 6 + ECD7, 8, // EC Build Date 7 + ECD8, 8, // EC Build Date 8 + ECD9, 8, // EC Build Date 9 + + Offset(0x30), // Keyboard: + FCLA, 8, // Fn Ctrl Reverse + FLKA, 8, // Function Lock State + TPLA, 8, // Trackpad State + KLBE, 8, // Keyboard Backlight Brightness + KLSE, 8, // Keyboard Backlight State + KLTE, 8, // Keyboard Backlight Timeout + + Offset(0x40), // Flags: + SHIP, 8, // Shipping Mode Flag + CSFG, 8, // Modern Standby Flag + KBCD, 8, // Rotate Flag + WIFI, 8, // WiFi Enable + AUDI, 8, // Control Audio + + Offset(0x50), // Devices: + FANM, 8, // Fan Mode + BFCP, 8, // Battery Full Charge Percentage + + Offset(0x60), // Recovery: + BSRC, 8, // BIOS Recover + + Offset(0x70), // Temperatures: + TSE1, 8, // Sensor 1 Temperature + TSE2, 8, // Sensor 2 Temperature + TSE3, 8, // Sensor 3 Temperature + SENF, 8, // Sensor F + TSHT, 8, // Thermal Sensor High Trip Point + TSLT, 8, // Thermal Sensor Low Trip Point + THER, 8, // Thermal Source + SURF, 8, // Chassis Surface Temperature + CHAR, 8, // Charger Temperature + CPUT, 8, // PECI CPU Temperature + PMXT, 8, // PLMX Temperature + + Offset(0x7f), // Lid: + LSTE, 1, // Lid Status + , 7, // Reserved + + Offset(0x80), // Battery: + ECPS, 8, // AC & Battery status + B1MN, 8, // Battery Model Number Code + B1SN, 16, // Battery Serial Number + B1DC, 16, // Battery Design Capacity + B1DV, 16, // Battery Design Voltage + B1FC, 16, // Battery Last Full Charge Capacity + B1TP, 16, // Battery Trip Point + B1ST, 8, // Battery State + B1PR, 16, // Battery Present Rate + B1RC, 16, // Battery Remaining Capacity + B1PV, 16, // Battery Present Voltage + BPRP, 8, // Battery Remaining percentage + BATT, 16, // Battery Temperature + BATC, 8, // Battery Temperature Ces + + // Unicorn - doesn't actually exist + Offset(0x9d), // OPM: + OPWE, 8, // OPM write to EC flag for UCSI + // Unicorn - doesn't actually exist + + Offset(0xb0), // MGO; + MGO0, 8, // UCSI DS MGO 0 + MGO1, 8, // UCSI DS MGO 1 + MGO2, 8, // UCSI DS MGO 2 + MGO3, 8, // UCSI DS MGO 3 + MGO4, 8, // UCSI DS MGO 4 + MGO5, 8, // UCSI DS MGO 5 + MGO6, 8, // UCSI DS MGO 6 + MGO7, 8, // UCSI DS MGO 7 + MGO8, 8, // UCSI DS MGO 8 + MGO9, 8, // UCSI DS MGO 9 + MGOA, 8, // UCSI DS MGO A + MGOB, 8, // UCSI DS MGO B + MGOC, 8, // UCSI DS MGO C + MGOD, 8, // UCSI DS MGO D + MGOE, 8, // UCSI DS MGO E + MGOF, 8, // UCSI DS MGO F + + Offset(0xc0), // CCI: + UCSV, 16, // UCSI DS Version + UCSD, 16, // UCSI DS Reserved + CCI0, 8, // UCSI DS CCI 0 + CCI1, 8, // UCSI DS CCI 1 + CCI2, 8, // UCSI DS CCI 2 + CCI3, 8, // UCSI DS CCI 3 + CTL0, 8, // UCSI DS Control 0 + CTL1, 8, // UCSI DS Control 0 + CTL2, 8, // UCSI DS Control 0 + CTL3, 8, // UCSI DS Control 0 + CTL4, 8, // UCSI DS Control 0 + CTL5, 8, // UCSI DS Control 0 + CTL6, 8, // UCSI DS Control 0 + CTL7, 8, // UCSI DS Control 0 + + Offset(0xd0), // MGI: + MGI0, 8, // UCSI DS MGI 0 + MGI1, 8, // UCSI DS MGI 1 + MGI2, 8, // UCSI DS MGI 2 + MGI3, 8, // UCSI DS MGI 3 + MGI4, 8, // UCSI DS MGI 4 + MGI5, 8, // UCSI DS MGI 5 + MGI6, 8, // UCSI DS MGI 6 + MGI7, 8, // UCSI DS MGI 7 + MGI8, 8, // UCSI DS MGI 8 + MGI9, 8, // UCSI DS MGI 9 + MGIA, 8, // UCSI DS MGI A + MGIB, 8, // UCSI DS MGI B + MGIC, 8, // UCSI DS MGI C + MGID, 8, // UCSI DS MGI D + MGIE, 8, // UCSI DS MGI E + MGIF, 8, // UCSI DS MGI F + + Offset(0xe6), // Delays: + ECWD, 16, // EC Wakeup Delay + ECWE, 8, // EC Wakeup Enable + + Offset(0xf7), // Thunderbolt: + TBTC, 8, // Thunderbolt Command + TBTP, 8, // Thunderbolt Data Port + TBTD, 8, // Thunderbolt Data + TBTA, 8, // Thunderbolt Acknowledge + TBTG, 16, // THunderbolt DBG Data +} diff --git a/src/ec/starlabs/merlin/variants/merlin/events.asl b/src/ec/starlabs/merlin/variants/merlin/events.asl new file mode 100644 index 0000000..bd1516e --- /dev/null +++ b/src/ec/starlabs/merlin/variants/merlin/events.asl @@ -0,0 +1,280 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method (_Q0D) // Event: Lid Opened +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0C) // Event: Lid Closed +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0A) // Event: AC Power Connected +{ + Notify (BAT0, 0x81) + Notify (ADP1, 0x80) +} + +Method (_Q0B, 0, NotSerialized) // Event: AC Power Disconnected +{ + Notify (BAT0, 0x81) + Notify (BAT0, 0x80) +} + +Method (_Q05) // Event: Backlight Brightness Down +{ + ^^^^HIDD.HPEM (20) +} + +Method (_Q06) // Event: Backlight Brightness Up +{ + ^^^^HIDD.HPEM (19) +} + +Method (_Q87) // Event: Function Lock +{ + FLKS = FLKA +} + +Method (_Q88) // Event: Trackpad Lock +{ + TPLS = TPLA +} +Method (_Q11) // Event: Keyboard Backlight Brightness +{ + KLBC = KLBE + KLSC = KLSE +} + +Method (_Q99) // Event: Airplane Mode +{ + ^^^^HIDD.HPEM (8) +} + +Method (_QD5) // Event: 10 Second Power Button Pressed +{ + Store ("EC: 10 Second Power Button Pressed", Debug) +} + +Method (_QD6) // Event: 10 Second Power Button Released +{ + Store ("EC: 10 Second Power Button Release", Debug) +} + +Method (_Q22, 0, NotSerialized) // Event: CHARGER_T +{ + Store ("EC: CHARGER_T", Debug) +} + +Method (_Q40) // Event: AC_DC +{ + SMB2 = 0xC6 +} + +Method (_Q41) // Event: DC_20_0 +{ + SMB2 = 0xC7 +} + +Method (_Q42) // Event: DC_60_20 +{ + SMB2 = 0xC9 +} + +Method (_Q43) // Event: DC_100_60 +{ + SMB2 = 0xC9 +} + +Method (_Q44) // Event: AC_ONLY +{ + SMB2 = 0xCA +} + +Method (_Q80, 0, NotSerialized) // Event: VOLUME_UP +{ + Store ("EC: VOLUME_UP", Debug) +} + +Method (_Q81, 0, NotSerialized) // Event: VOLUME_DOWN +{ + Store ("EC: VOLUME_DOWN", Debug) +} + +Method (_Q54, 0, NotSerialized) // Event: PWRBTN +{ + Store ("EC: PWRBTN", Debug) +} + +Method (_QF0) // Event: Temperature Report +{ + Store ("EC: Temperature Report", Debug) +} + +Method (_QF1) // Event: Temperature Trigger +{ + // Notify (SEN3, 0x90) +} + +/* + * The below events are unique to this platform. + */ + +Method (_Q79, 0, NotSerialized) // Event: USB Type-C +{ + Store ("EC: USB Type-C", Debug) + UCEV() +} + +Method (_Q85, 0, NotSerialized) // Event: HOME +{ + Store ("EC: HOME", Debug) +} + +Method (_Q01) // Event: F1 Hot Key +{ + Store ("EC: F1", Debug) +} + +Method (_Q02) // Event: F2 Hot Key +{ + Store ("EC: F2", Debug) +} + +Method (_Q03) // Event: F3 Hot Key +{ + Store ("EC: F3", Debug) +} + +Method (_Q04) // Event: F4 Hot Key +{ + Store ("EC: F4", Debug) +} + +Method (_Q08) // Event: F5 Hot Key +{ + Store ("EC: F5", Debug) +} + +Method (_Q09) // Event: F6 Hot Key +{ + Store ("EC: F6", Debug) +} + +Method (_Q07) // Event: F7 Hot Key +{ + Store ("EC: F7", Debug) +} + +Method (_Q10) // Event: F10 Hot Key +{ + Store ("EC: F10", Debug) +} + +Method (_Q12) // Event: F12 Hot Key +{ + Store ("EC: F6", Debug) +} + +Method (_Q0E, 0, NotSerialized) // Event: SLEEP +{ + Store ("EC: SLEEP", Debug) +} + +Method (_Q13, 0, NotSerialized) // Event: BRIGHTNESS +{ + Store ("EC: BRIGHTNESS", Debug) +} + +Method (_Q20, 0, NotSerialized) // Event: CPU_T +{ + Store ("EC: CPU_T", Debug) +} + +Method (_Q21, 0, NotSerialized) // Event: SKIN_T +{ + Store ("EC: SKIN_T", Debug) +} + +Method (_Q30, 0, NotSerialized) // Event: THROT_OFF +{ + Store ("EC: THROT_OFF", Debug) +} + +Method (_Q31, 0, NotSerialized) // Event: THROT_LV1 +{ + Store ("EC: THROT_LV1", Debug) +} + +Method (_Q32, 0, NotSerialized) // Event: THROT_LV2 +{ + Store ("EC: THROT_LV2", Debug) +} + +Method (_Q33, 0, NotSerialized) // Event: THROT_LV3 +{ + Store ("EC: THROT_LV3", Debug) +} + +Method (_Q34, 0, NotSerialized) // Event: THROT_LV4 +{ + Store ("EC: THROT_LV4", Debug) +} + +Method (_Q35, 0, NotSerialized) // Event: THROT_LV5 +{ + Store ("EC: THROT_LV5", Debug) +} + +Method (_Q36, 0, NotSerialized) // Event: THROT_LV6 +{ + Store ("EC: THROT_LV6", Debug) +} + +Method (_Q37, 0, NotSerialized) // Event: THROT_LV7 +{ + Store ("EC: THROT_LV7", Debug) +} + +Method (_Q38, 0, NotSerialized) // Event: CPU_DN_SPEED +{ + Store ("EC: CPU_DN_SPEED", Debug) +} + +Method (_Q3C, 0, NotSerialized) // Event: CPU_UP_SPEED +{ + Store ("EC: CPU_UP_SPEED", Debug) +} + +Method (_Q3D, 0, NotSerialized) // Event: CPU_TURBO_OFF +{ + Store ("EC: CPU_TURBO_OFF", Debug) +} + +Method (_Q3E, 0, NotSerialized) // Event: CPU_TURBO_ON +{ + Store ("EC: CPU_TURBO_ON", Debug) +} + +Method (_Q3F, 0, NotSerialized) // Event: SHUTDOWN +{ + Store ("EC: SHUTDOWN", Debug) +} + +Method (_Q45) // Event: SENSOR_T76 +{ + SMB2 = 0xCB +} + +Method (_Q48, 0, NotSerialized) // Event: Fan Turbo On +{ + Store ("EC: Fan Turbo On", Debug) +} + +Method (_Q49, 0, NotSerialized) // Event: Fan Turbo Off +{ + Store ("EC: Fan Turbo Off", Debug) +} diff --git a/src/ec/starlabs/merlin/variants/tgl/ecdefs.h b/src/ec/starlabs/merlin/variants/tgl/ecdefs.h new file mode 100644 index 0000000..8325b78 --- /dev/null +++ b/src/ec/starlabs/merlin/variants/tgl/ecdefs.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * EC communication interface for ITE ITE Embedded Controller. + */ + +#ifndef _EC_STARLABS_ITE_CFG_H +#define _EC_STARLABS_ITE_CFG_H + +/* IT5570 chip ID byte values. */ +#define ITE_CHIPID1_VAL 0x55 +#define ITE_CHIPID2_VAL 0x70 + +/* EC RAM offsets. */ +#define ECRAM_KBL_BRIGHTNESS 0x09 +#define ECRAM_KBL_TIMEOUT 0x10 +#define ECRAM_KBL_STATE 0x0a +#define ECRAM_TRACKPAD_STATE 0x0c +#define ECRAM_FN_LOCK_STATE 0x0f +#define ECRAM_FN_CTRL_REVERSE 0x17 +#define ECRAM_MAX_CHARGE 0x1a +#define ECRAM_FAN_MODE 0x1b + +#endif diff --git a/src/ec/starlabs/merlin/variants/tgl/emem.asl b/src/ec/starlabs/merlin/variants/tgl/emem.asl new file mode 100644 index 0000000..bfce014 --- /dev/null +++ b/src/ec/starlabs/merlin/variants/tgl/emem.asl @@ -0,0 +1,168 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +OperationRegion (ECF2, EmbeddedControl, 0x00, 0xFF) +Field (ECF2, ByteAcc, Lock, Preserve) +{ + Offset(0x00), + ECMV, 8, // Major Version Number + ECSV, 8, // Minor Version Number + KBVS, 8, // Keyboard Controller Version + ECTV, 8, // Test Version Number + OSFG, 8, // OS Flag + FRMF, 8, // Froce Mirror Flag + + Offset(0x07), + SKUI, 8, // SKU ID + CSFG, 8, // Modern Standby Flag + KLBE, 8, // Keyboard Backlight Brightness + KLSE, 8, // Keyboard Backlight State + BDID, 8, // Board ID + TPLA, 8, // Trackpad State + KBCD, 8, // Rotate Flag + WIFI, 8, // WiFi Enable + FLKA, 8, // Function Lock State + KLTE, 8, // Keyboard Backlight Timeout + + Offset(0x13), + AUDI, 8, // Control Audio + + Offset(0x15), + SURF, 8, // Chassis Surface Temperature + CHAR, 8, // Charger Temperature + FCLA, 8, // Fn Ctrl Reverse + + Offset(0x1a), + BFCP, 8, // Battery Full Charge Percentage + FANM, 8, // Fan Mode + + Offset(0x1d), + BSRC, 8, // BIOS Recover + + Offset(0x40), + SHIP, 8, // Shipping Mode Flag + ECT0, 8, // EC Build Time 0 + ECT1, 8, // EC Build Time 1 + ECT2, 8, // EC Build Time 2 + ECT3, 8, // EC Build Time 3 + ECT4, 8, // EC Build Time 4 + ECT5, 8, // EC Build Time 5 + ECT6, 8, // EC Build Time 6 + ECT7, 8, // EC Build Time 7 + ECT8, 8, // EC Build Time 8 + ECT9, 8, // EC Build Time 9 + + Offset(0x4B), + ECD0, 8, // EC Build Date 0 + ECD1, 8, // EC Build Date 1 + ECD2, 8, // EC Build Date 2 + ECD3, 8, // EC Build Date 3 + ECD4, 8, // EC Build Date 4 + ECD5, 8, // EC Build Date 5 + ECD6, 8, // EC Build Date 6 + ECD7, 8, // EC Build Date 7 + ECD8, 8, // EC Build Date 8 + ECD9, 8, // EC Build Date 9 + + Offset(0x62), + TSE2, 8, // Sensor 2 Temperature + SENF, 8, // Sensor F + TSHT, 8, // Thermal Sensor High Trip Point + TSLT, 8, // Thermal Sensor Low Trip Point + THER, 8, // Thermal Source + + Offset(0x68), + BATT, 16, // Battery Temperature + BATC, 8, // Battery Temperature Ces + + Offset(0x70), + CPUT, 8, // PECI CPU Temperature + PMXT, 8, // PLMX Temperature + TSE1, 8, // Sensor 1 Temperature + TSE3, 8, // Sensor 3 Temperature + + Offset(0x7f), + LSTE, 1, // Lid Status + , 7, // Reserved + + Offset(0x80), + ECPS, 8, // AC & Battery status + B1MN, 8, // Battery Model Number Code + B1SN, 16, // Battery Serial Number + B1DC, 16, // Battery Design Capacity + B1DV, 16, // Battery Design Voltage + B1FC, 16, // Battery Last Full Charge Capacity + B1TP, 16, // Battery Trip Point + B1ST, 8, // Battery State + B1PR, 16, // Battery Present Rate + B1RC, 16, // Battery Remaining Capacity + B1PV, 16, // Battery Present Voltage + BPRP, 8, // Battery Remaining percentage + + // Unicorn - doesn't actually exist + Offset(0x9d), + OPWE, 8, // OPM write to EC flag for UCSI + // Unicorn - doesn't actually exist + + Offset(0xb0), + MGO0, 8, // UCSI DS MGO 0 + MGO1, 8, // UCSI DS MGO 1 + MGO2, 8, // UCSI DS MGO 2 + MGO3, 8, // UCSI DS MGO 3 + MGO4, 8, // UCSI DS MGO 4 + MGO5, 8, // UCSI DS MGO 5 + MGO6, 8, // UCSI DS MGO 6 + MGO7, 8, // UCSI DS MGO 7 + MGO8, 8, // UCSI DS MGO 8 + MGO9, 8, // UCSI DS MGO 9 + MGOA, 8, // UCSI DS MGO A + MGOB, 8, // UCSI DS MGO B + MGOC, 8, // UCSI DS MGO C + MGOD, 8, // UCSI DS MGO D + MGOE, 8, // UCSI DS MGO E + MGOF, 8, // UCSI DS MGO F + + Offset(0xc0), + UCSV, 16, // UCSI DS Version + UCSD, 16, // UCSI DS Reserved + CCI0, 8, // UCSI DS CCI 0 + CCI1, 8, // UCSI DS CCI 1 + CCI2, 8, // UCSI DS CCI 2 + CCI3, 8, // UCSI DS CCI 3 + CTL0, 8, // UCSI DS Control 0 + CTL1, 8, // UCSI DS Control 0 + CTL2, 8, // UCSI DS Control 0 + CTL3, 8, // UCSI DS Control 0 + CTL4, 8, // UCSI DS Control 0 + CTL5, 8, // UCSI DS Control 0 + CTL6, 8, // UCSI DS Control 0 + CTL7, 8, // UCSI DS Control 0 + + Offset(0xd0), + MGI0, 8, // UCSI DS MGI 0 + MGI1, 8, // UCSI DS MGI 1 + MGI2, 8, // UCSI DS MGI 2 + MGI3, 8, // UCSI DS MGI 3 + MGI4, 8, // UCSI DS MGI 4 + MGI5, 8, // UCSI DS MGI 5 + MGI6, 8, // UCSI DS MGI 6 + MGI7, 8, // UCSI DS MGI 7 + MGI8, 8, // UCSI DS MGI 8 + MGI9, 8, // UCSI DS MGI 9 + MGIA, 8, // UCSI DS MGI A + MGIB, 8, // UCSI DS MGI B + MGIC, 8, // UCSI DS MGI C + MGID, 8, // UCSI DS MGI D + MGIE, 8, // UCSI DS MGI E + MGIF, 8, // UCSI DS MGI F + + Offset(0xe6), + ECWD, 16, // EC Wakeup Delay + ECWE, 8, // EC Wakeup Enable + + Offset(0xf7), + TBTC, 8, // Thunderbolt Command + TBTP, 8, // Thunderbolt Data Port + TBTD, 8, // Thunderbolt Data + TBTA, 8, // Thunderbolt Acknowledge + TBTG, 16, // THunderbolt DBG Data +} diff --git a/src/ec/starlabs/merlin/variants/tgl/events.asl b/src/ec/starlabs/merlin/variants/tgl/events.asl new file mode 100644 index 0000000..ba09c8a --- /dev/null +++ b/src/ec/starlabs/merlin/variants/tgl/events.asl @@ -0,0 +1,279 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method (_Q0D, 0, NotSerialized) // Event: Lid Opened +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0C, 0, NotSerialized) // Event: Lid Closed +{ + \LIDS = LSTE + Notify (LID0, 0x80) +} + +Method (_Q0A, 0, NotSerialized) // Event: AC Power Connected +{ + Notify (BAT0, 0x81) + Notify (ADP1, 0x80) +} + +Method (_Q0B, 0, NotSerialized) // Event: AC Power Disconnected +{ + Notify (BAT0, 0x81) + Notify (BAT0, 0x80) +} + +Method (_Q05, 0, NotSerialized) // Event: Backlight Brightness Down +{ + ^^^^HIDD.HPEM (20) +} + +Method (_Q06, 0, NotSerialized) // Event: Backlight Brightness Up +{ + ^^^^HIDD.HPEM (19) +} + +Method (_Q87, 0, NotSerialized) // Event: Function Lock +{ + FLKS = FLKA +} + +Method (_Q88, 0, NotSerialized) // Event: Trackpad Lock +{ + TPLS = TPLA +} +Method (_Q11) // Event: Keyboard Backlight Brightness +{ + KLBC = KLBE +} + +Method (_Q99, 0, NotSerialized) // Event: Airplane Mode +{ + ^^^^HIDD.HPEM (8) +} + +Method (_QD5, 0, NotSerialized) // Event: 10 Second Power Button Pressed +{ + Notify (HIDD, 0xCE) +} + +Method (_QD6, 0, NotSerialized) // Event: 10 Second Power Button Released +{ + Notify (HIDD, 0xCF) +} + +Method (_Q22, 0, NotSerialized) // Event: CHARGER_T +{ + Store ("EC: CHARGER_T", Debug) +} + +Method (_Q40, 0, NotSerialized) // Event: AC and DC Power +{ + SMB2 = 0xC6 +} + +Method (_Q41, 0, NotSerialized) // Event: Battery Charge between 0% and 20% +{ + SMB2 = 0xC7 +} + +Method (_Q42, 0, NotSerialized) // Event: Battery Charge between 20% and 60% +{ + SMB2 = 0xC8 +} + +Method (_Q43, 0, NotSerialized) // Event: Battery Charge between 60% and 100% +{ + SMB2 = 0xC9 +} + +Method (_Q44, 0, NotSerialized) // Event: AC Power Only +{ + SMB2 = 0xCA +} + +Method (_Q80, 0, NotSerialized) // Event: Volume Up +{ + Store ("EC: VOLUME_UP", Debug) +} + +Method (_Q81, 0, NotSerialized) // Event: Volume Down +{ + Store ("EC: VOLUME_DOWN", Debug) +} + +Method (_Q54, 0, NotSerialized) // Event: Power Button Press +{ + Store ("EC: PWRBTN", Debug) +} + +Method (_QF0, 0, NotSerialized) // Event: Temperature Report +{ + Store ("EC: Temperature Report", Debug) +} + +Method (_QF1, 0, NotSerialized) // Event: Temperature Trigger +{ + // Notify (SEN3, 0x90) +} + +/* + * The below events are unique to this platform. + */ + +Method (_Q79, 0, NotSerialized) // Event: USB Type-C +{ + Store ("EC: USB Type-C", Debug) + UCEV() +} + +Method (_Q85, 0, NotSerialized) // Event: HOME +{ + Store ("EC: HOME", Debug) +} + +Method (_Q01, 0, NotSerialized) // Event: F1 Hot Key +{ + Store ("EC: F1", Debug) +} + +Method (_Q02, 0, NotSerialized) // Event: F2 Hot Key +{ + Store ("EC: F2", Debug) +} + +Method (_Q03, 0, NotSerialized) // Event: F3 Hot Key +{ + Store ("EC: F3", Debug) +} + +Method (_Q04, 0, NotSerialized) // Event: F4 Hot Key +{ + Store ("EC: F4", Debug) +} + +Method (_Q08, 0, NotSerialized) // Event: F5 Hot Key +{ + Store ("EC: F5", Debug) +} + +Method (_Q09, 0, NotSerialized) // Event: F6 Hot Key +{ + Store ("EC: F6", Debug) +} + +Method (_Q07, 0, NotSerialized) // Event: F7 Hot Key +{ + Store ("EC: F7", Debug) +} + +Method (_Q10, 0, NotSerialized) // Event: F10 Hot Key +{ + Store ("EC: F10", Debug) +} + +Method (_Q12, 0, NotSerialized) // Event: F12 Hot Key +{ + Store ("EC: F6", Debug) +} + +Method (_Q0E, 0, NotSerialized) // Event: SLEEP +{ + Store ("EC: SLEEP", Debug) +} + +Method (_Q13, 0, NotSerialized) // Event: BRIGHTNESS +{ + Store ("EC: BRIGHTNESS", Debug) +} + +Method (_Q20, 0, NotSerialized) // Event: CPU_T +{ + Store ("EC: CPU_T", Debug) +} + +Method (_Q21, 0, NotSerialized) // Event: SKIN_T +{ + Store ("EC: SKIN_T", Debug) +} + +Method (_Q30, 0, NotSerialized) // Event: THROT_OFF +{ + Store ("EC: THROT_OFF", Debug) +} + +Method (_Q31, 0, NotSerialized) // Event: THROT_LV1 +{ + Store ("EC: THROT_LV1", Debug) +} + +Method (_Q32, 0, NotSerialized) // Event: THROT_LV2 +{ + Store ("EC: THROT_LV2", Debug) +} + +Method (_Q33, 0, NotSerialized) // Event: THROT_LV3 +{ + Store ("EC: THROT_LV3", Debug) +} + +Method (_Q34, 0, NotSerialized) // Event: THROT_LV4 +{ + Store ("EC: THROT_LV4", Debug) +} + +Method (_Q35, 0, NotSerialized) // Event: THROT_LV5 +{ + Store ("EC: THROT_LV5", Debug) +} + +Method (_Q36, 0, NotSerialized) // Event: THROT_LV6 +{ + Store ("EC: THROT_LV6", Debug) +} + +Method (_Q37, 0, NotSerialized) // Event: THROT_LV7 +{ + Store ("EC: THROT_LV7", Debug) +} + +Method (_Q38, 0, NotSerialized) // Event: CPU_DN_SPEED +{ + Store ("EC: CPU_DN_SPEED", Debug) +} + +Method (_Q3C, 0, NotSerialized) // Event: CPU_UP_SPEED +{ + Store ("EC: CPU_UP_SPEED", Debug) +} + +Method (_Q3D, 0, NotSerialized) // Event: CPU_TURBO_OFF +{ + Store ("EC: CPU_TURBO_OFF", Debug) +} + +Method (_Q3E, 0, NotSerialized) // Event: CPU_TURBO_ON +{ + Store ("EC: CPU_TURBO_ON", Debug) +} + +Method (_Q3F, 0, NotSerialized) // Event: SHUTDOWN +{ + Store ("EC: SHUTDOWN", Debug) +} + +Method (_Q45, 0, NotSerialized) // Event: SENSOR_T76 +{ + SMB2 = 0xCB +} + +Method (_Q48, 0, NotSerialized) // Event: Fan Turbo On +{ + Store ("EC: Fan Turbo On", Debug) +} + +Method (_Q49, 0, NotSerialized) // Event: Fan Turbo Off +{ + Store ("EC: Fan Turbo Off", Debug) +}
-
Sean Rhodes (Code Review)