Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5329
-gerrit
commit 89d34b881b3da13ccd2657f2681c9e1928da6834 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Fri Feb 28 15:15:12 2014 +0200
OxPCIe uart: Move under drivers/uart
This driver is only a thin shell for uart8250mem and we could extend it with further compatible PCI IDs from other vendors/brands.
Change-Id: Ic115b1baa0be0dbaa81e4a17a2e466019d3f4a67 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/drivers/Kconfig | 1 - src/drivers/Makefile.inc | 1 - src/drivers/oxford/Kconfig | 1 - src/drivers/oxford/Makefile.inc | 1 - src/drivers/oxford/oxpcie/Kconfig | 10 --- src/drivers/oxford/oxpcie/Makefile.inc | 4 -- src/drivers/oxford/oxpcie/oxpcie.c | 73 -------------------- src/drivers/oxford/oxpcie/oxpcie_early.c | 111 ------------------------------- src/drivers/uart/Kconfig | 11 +++ src/drivers/uart/Makefile.inc | 5 ++ src/drivers/uart/oxpcie.c | 73 ++++++++++++++++++++ src/drivers/uart/oxpcie_early.c | 111 +++++++++++++++++++++++++++++++ 12 files changed, 200 insertions(+), 202 deletions(-)
diff --git a/src/drivers/Kconfig b/src/drivers/Kconfig index 5267ff8..1a5f8ff 100644 --- a/src/drivers/Kconfig +++ b/src/drivers/Kconfig @@ -27,7 +27,6 @@ source src/drivers/ics/Kconfig source src/drivers/intel/Kconfig source src/drivers/ipmi/Kconfig source src/drivers/maxim/Kconfig -source src/drivers/oxford/Kconfig source src/drivers/parade/Kconfig if PC80_SYSTEM source src/drivers/pc80/Kconfig diff --git a/src/drivers/Makefile.inc b/src/drivers/Makefile.inc index 148e257..f11e4b8 100644 --- a/src/drivers/Makefile.inc +++ b/src/drivers/Makefile.inc @@ -25,7 +25,6 @@ subdirs-y += i2c subdirs-y += intel subdirs-y += maxim subdirs-y += net -subdirs-y += oxford subdirs-y += parade subdirs-y += realtek subdirs-y += sil diff --git a/src/drivers/oxford/Kconfig b/src/drivers/oxford/Kconfig deleted file mode 100644 index cd7c27c..0000000 --- a/src/drivers/oxford/Kconfig +++ /dev/null @@ -1 +0,0 @@ -source src/drivers/oxford/oxpcie/Kconfig diff --git a/src/drivers/oxford/Makefile.inc b/src/drivers/oxford/Makefile.inc deleted file mode 100644 index 732face..0000000 --- a/src/drivers/oxford/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -subdirs-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie diff --git a/src/drivers/oxford/oxpcie/Kconfig b/src/drivers/oxford/oxpcie/Kconfig deleted file mode 100644 index c2ea7b6..0000000 --- a/src/drivers/oxford/oxpcie/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config DRIVERS_OXFORD_OXPCIE - bool "Oxford OXPCIe952" - default n - depends on PCI - select DRIVERS_UART_8250MEM - select EARLY_PCI_BRIDGE - help - Support for Oxford OXPCIe952 serial port PCIe cards. - Currently only devices with the vendor ID 0x1415 and device ID - 0xc158 or 0xc11b will work. diff --git a/src/drivers/oxford/oxpcie/Makefile.inc b/src/drivers/oxford/oxpcie/Makefile.inc deleted file mode 100644 index 5e3e6e5..0000000 --- a/src/drivers/oxford/oxpcie/Makefile.inc +++ /dev/null @@ -1,4 +0,0 @@ -ifeq ($(CONFIG_CONSOLE_SERIAL),y) -ramstage-y += oxpcie_early.c oxpcie.c -romstage-y += oxpcie_early.c -endif diff --git a/src/drivers/oxford/oxpcie/oxpcie.c b/src/drivers/oxford/oxpcie/oxpcie.c deleted file mode 100644 index 76119d2..0000000 --- a/src/drivers/oxford/oxpcie/oxpcie.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <device/device.h> -#include <device/pci_def.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <console/console.h> -#include <console/uart.h> -#include <arch/io.h> - -static void oxford_oxpcie_enable(device_t dev) -{ - printk(BIOS_DEBUG, "Initializing Oxford OXPCIe952\n"); - - struct resource *res = find_resource(dev, 0x10); - if (!res) { - printk(BIOS_WARNING, "OXPCIe952: No UART resource found.\n"); - return; - } - - printk(BIOS_DEBUG, "OXPCIe952: Class=%x Revision ID=%x\n", - (read32(res->base) >> 8), (read32(res->base) & 0xff)); - printk(BIOS_DEBUG, "OXPCIe952: %d UARTs detected.\n", - (read32(res->base + 4) & 3)); - printk(BIOS_DEBUG, "OXPCIe952: UART BAR: 0x%x\n", (u32)res->base); -} - - -static void oxford_oxpcie_set_resources(struct device *dev) -{ - pci_dev_set_resources(dev); - - /* Re-initialize OXPCIe base address after set_resources */ - u32 mmio_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - oxford_remap(mmio_base & ~0xf); -} - -static struct device_operations oxford_oxpcie_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = oxford_oxpcie_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = oxford_oxpcie_enable, - .scan_bus = 0, -}; - -static const struct pci_driver oxford_oxpcie_driver __pci_driver = { - .ops = &oxford_oxpcie_ops, - .vendor = 0x1415, - .device = 0xc158, -}; - -static const struct pci_driver oxford_oxpcie_driver_2 __pci_driver = { - .ops = &oxford_oxpcie_ops, - .vendor = 0x1415, - .device = 0xc11b, -}; diff --git a/src/drivers/oxford/oxpcie/oxpcie_early.c b/src/drivers/oxford/oxpcie/oxpcie_early.c deleted file mode 100644 index b81fa89..0000000 --- a/src/drivers/oxford/oxpcie/oxpcie_early.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#define __SIMPLE_DEVICE__ - -#include <stdint.h> -#include <stddef.h> -#include <arch/io.h> -#include <arch/early_variables.h> -#include <boot/coreboot_tables.h> -#include <console/uart.h> -#include <device/pci.h> -#include <device/pci_def.h> - -static unsigned int oxpcie_present CAR_GLOBAL; -static ROMSTAGE_CONST u32 uart0_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x1000; -static ROMSTAGE_CONST u32 uart1_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x2000; - -int pci_early_device_probe(u8 bus, u8 dev, u32 mmio_base) -{ - pci_devfn_t device = PCI_DEV(bus, dev, 0); - - u32 id = pci_read_config32(device, PCI_VENDOR_ID); - switch (id) { - case 0xc1181415: /* e.g. Startech PEX1S1PMINI function 0 */ - /* On this device function 0 is the parallel port, and - * function 3 is the serial port. So let's go look for - * the UART. - */ - device = PCI_DEV(bus, dev, 3); - id = pci_read_config32(device, PCI_VENDOR_ID); - if (id != 0xc11b1415) - return -1; - break; - case 0xc11b1415: /* e.g. Startech PEX1S1PMINI function 3 */ - case 0xc1581415: /* e.g. Startech MPEX2S952 */ - break; - default: - /* No UART here. */ - return -1; - } - - /* Sanity-check, we assume fixed location. */ - if (mmio_base != CONFIG_EARLY_PCI_MMIO_BASE) - return -1; - - /* Setup base address on device */ - pci_write_config32(device, PCI_BASE_ADDRESS_0, mmio_base); - - /* Enable memory on device */ - u16 reg16 = pci_read_config16(device, PCI_COMMAND); - reg16 |= PCI_COMMAND_MEMORY; - pci_write_config16(device, PCI_COMMAND, reg16); - - car_set_var(oxpcie_present, 1); - return 0; -} - -static int oxpcie_uart_active(void) -{ - return (car_get_var(oxpcie_present)); -} - -unsigned int uart_platform_base(int idx) -{ - if (idx == 0 && oxpcie_uart_active()) - return uart0_base; - if (idx == 1 && oxpcie_uart_active()) - return uart1_base; - return 0; -} - -#ifndef __PRE_RAM__ -void oxford_remap(u32 new_base) -{ - uart0_base = new_base + 0x1000; - uart1_base = new_base + 0x2000; -} - -void uart_fill_lb(void *data) -{ - struct lb_serial serial; - serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; - serial.baseaddr = uart_platform_base(0); - serial.baud = default_baudrate(); - lb_add_serial(&serial, data); - - lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); -} -#endif - -unsigned int uart_platform_refclk(void) -{ - return 62500000; -} diff --git a/src/drivers/uart/Kconfig b/src/drivers/uart/Kconfig index 889c69a..a979437 100644 --- a/src/drivers/uart/Kconfig +++ b/src/drivers/uart/Kconfig @@ -21,6 +21,17 @@ config HAVE_UART_SPECIAL bool default n
+config DRIVERS_UART_OXPCIE + bool "Oxford OXPCIe952" + default n + depends on PCI + select DRIVERS_UART_8250MEM + select EARLY_PCI_BRIDGE + help + Support for Oxford OXPCIe952 serial port PCIe cards. + Currently only devices with the vendor ID 0x1415 and device ID + 0xc158 or 0xc11b will work. + config DRIVERS_UART_PL011 bool default n diff --git a/src/drivers/uart/Makefile.inc b/src/drivers/uart/Makefile.inc index 286bff2..5164282 100644 --- a/src/drivers/uart/Makefile.inc +++ b/src/drivers/uart/Makefile.inc @@ -18,6 +18,11 @@ ramstage-y += uart8250mem.c smm-$(CONFIG_DEBUG_SMI) += uart8250mem.c endif
+ifeq ($(CONFIG_DRIVERS_UART_OXPCIE),y) +ramstage-y += oxpcie_early.c oxpcie.c +romstage-y += oxpcie_early.c +endif + ifeq ($(CONFIG_DRIVERS_UART_PL011),y) bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += pl011.c romstage-$(CONFIG_EARLY_CONSOLE) += pl011.c diff --git a/src/drivers/uart/oxpcie.c b/src/drivers/uart/oxpcie.c new file mode 100644 index 0000000..76119d2 --- /dev/null +++ b/src/drivers/uart/oxpcie.c @@ -0,0 +1,73 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include <device/pci_def.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <console/console.h> +#include <console/uart.h> +#include <arch/io.h> + +static void oxford_oxpcie_enable(device_t dev) +{ + printk(BIOS_DEBUG, "Initializing Oxford OXPCIe952\n"); + + struct resource *res = find_resource(dev, 0x10); + if (!res) { + printk(BIOS_WARNING, "OXPCIe952: No UART resource found.\n"); + return; + } + + printk(BIOS_DEBUG, "OXPCIe952: Class=%x Revision ID=%x\n", + (read32(res->base) >> 8), (read32(res->base) & 0xff)); + printk(BIOS_DEBUG, "OXPCIe952: %d UARTs detected.\n", + (read32(res->base + 4) & 3)); + printk(BIOS_DEBUG, "OXPCIe952: UART BAR: 0x%x\n", (u32)res->base); +} + + +static void oxford_oxpcie_set_resources(struct device *dev) +{ + pci_dev_set_resources(dev); + + /* Re-initialize OXPCIe base address after set_resources */ + u32 mmio_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + oxford_remap(mmio_base & ~0xf); +} + +static struct device_operations oxford_oxpcie_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = oxford_oxpcie_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = oxford_oxpcie_enable, + .scan_bus = 0, +}; + +static const struct pci_driver oxford_oxpcie_driver __pci_driver = { + .ops = &oxford_oxpcie_ops, + .vendor = 0x1415, + .device = 0xc158, +}; + +static const struct pci_driver oxford_oxpcie_driver_2 __pci_driver = { + .ops = &oxford_oxpcie_ops, + .vendor = 0x1415, + .device = 0xc11b, +}; diff --git a/src/drivers/uart/oxpcie_early.c b/src/drivers/uart/oxpcie_early.c new file mode 100644 index 0000000..b81fa89 --- /dev/null +++ b/src/drivers/uart/oxpcie_early.c @@ -0,0 +1,111 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2011 Google Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define __SIMPLE_DEVICE__ + +#include <stdint.h> +#include <stddef.h> +#include <arch/io.h> +#include <arch/early_variables.h> +#include <boot/coreboot_tables.h> +#include <console/uart.h> +#include <device/pci.h> +#include <device/pci_def.h> + +static unsigned int oxpcie_present CAR_GLOBAL; +static ROMSTAGE_CONST u32 uart0_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x1000; +static ROMSTAGE_CONST u32 uart1_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x2000; + +int pci_early_device_probe(u8 bus, u8 dev, u32 mmio_base) +{ + pci_devfn_t device = PCI_DEV(bus, dev, 0); + + u32 id = pci_read_config32(device, PCI_VENDOR_ID); + switch (id) { + case 0xc1181415: /* e.g. Startech PEX1S1PMINI function 0 */ + /* On this device function 0 is the parallel port, and + * function 3 is the serial port. So let's go look for + * the UART. + */ + device = PCI_DEV(bus, dev, 3); + id = pci_read_config32(device, PCI_VENDOR_ID); + if (id != 0xc11b1415) + return -1; + break; + case 0xc11b1415: /* e.g. Startech PEX1S1PMINI function 3 */ + case 0xc1581415: /* e.g. Startech MPEX2S952 */ + break; + default: + /* No UART here. */ + return -1; + } + + /* Sanity-check, we assume fixed location. */ + if (mmio_base != CONFIG_EARLY_PCI_MMIO_BASE) + return -1; + + /* Setup base address on device */ + pci_write_config32(device, PCI_BASE_ADDRESS_0, mmio_base); + + /* Enable memory on device */ + u16 reg16 = pci_read_config16(device, PCI_COMMAND); + reg16 |= PCI_COMMAND_MEMORY; + pci_write_config16(device, PCI_COMMAND, reg16); + + car_set_var(oxpcie_present, 1); + return 0; +} + +static int oxpcie_uart_active(void) +{ + return (car_get_var(oxpcie_present)); +} + +unsigned int uart_platform_base(int idx) +{ + if (idx == 0 && oxpcie_uart_active()) + return uart0_base; + if (idx == 1 && oxpcie_uart_active()) + return uart1_base; + return 0; +} + +#ifndef __PRE_RAM__ +void oxford_remap(u32 new_base) +{ + uart0_base = new_base + 0x1000; + uart1_base = new_base + 0x2000; +} + +void uart_fill_lb(void *data) +{ + struct lb_serial serial; + serial.type = LB_SERIAL_TYPE_MEMORY_MAPPED; + serial.baseaddr = uart_platform_base(0); + serial.baud = default_baudrate(); + lb_add_serial(&serial, data); + + lb_add_console(LB_TAG_CONSOLE_SERIAL8250MEM, data); +} +#endif + +unsigned int uart_platform_refclk(void) +{ + return 62500000; +}
-
Kyösti Mälkki