Change in coreboot[master]: mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration

[Mario Scheithauer (Code Review)]

Attention is currently required from: Mario Scheithauer, Werner Zeh.
Hello build bot (Jenkins), Paul Menzel, Michael Niewöhner, Werner Zeh,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/54911

to look at the new patch set (#4).

Change subject: mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration
......................................................................

mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration

With commit 405f229689 (soc/intel/*: drop UART pad configuration from
common code) the UART pad configuration was dropped from common SoC
code. Through a second commit 5ff17ed393 (mb/siemens/mc_apl1: do UART
pad configuration at board-level) the UART pad configuration was made
for mc_apl1 baseboard. This change is also needed for all other mc_apl
boards.

Change-Id: If78726d9b141e4e7580cca3267f49c1a5b95d7fa
Signed-off-by: Mario Scheithauer 
---
M src/mainboard/siemens/mc_apl1/variants/mc_apl2/gpio.c
M src/mainboard/siemens/mc_apl1/variants/mc_apl3/gpio.c
M src/mainboard/siemens/mc_apl1/variants/mc_apl4/gpio.c
M src/mainboard/siemens/mc_apl1/variants/mc_apl5/gpio.c
M src/mainboard/siemens/mc_apl1/variants/mc_apl6/gpio.c
5 files changed, 16 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/54911/4