Change in coreboot[master]: mb/google/kahlee: Enable wlan card so it can be detected

[Martin Roth (Code Review)]

Martin Roth has uploaded this change for review. ( https://review.coreboot.org/23552

Change subject: mb/google/kahlee: Enable wlan card so it can be detected
......................................................................

mb/google/kahlee: Enable wlan card so it can be detected

The wifi card was not being powered, and was being held in reset during
PCI enumeration, so it was not being brought up.

BUG=b:72738963
TEST=Verify wlan card shows up in lspci

Change-Id: I5a1e83298af35aa80c67c75cd6ec0a2c3213891e
Signed-off-by: Martin Roth 
---
M src/mainboard/google/kahlee/variants/baseboard/gpio.c
1 file changed, 6 insertions(+), 6 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/52/23552/1

diff --git a/src/mainboard/google/kahlee/variants/baseboard/gpio.c b/src/mainboard/google/kahlee/variants/baseboard/gpio.c
index 6954f63..a6bcea5 100644
--- a/src/mainboard/google/kahlee/variants/baseboard/gpio.c
+++ b/src/mainboard/google/kahlee/variants/baseboard/gpio.c
@@ -38,6 +38,9 @@
    /* GPIO_3 - MEM_VOLT_SEL */
    { GPIO_3, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },

+	/* GPIO_4 - EN_PP3300_WLAN */
+	{ GPIO_4, Function0, OUTPUT_H },
+
    /* GPIO_5 - PCH_TRACKPAD_INT_3V3_ODL, SCI */
    { GPIO_5, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },

@@ -90,6 +93,9 @@
    /* GPIO_42 - S5_MUX_CTRL */
    { GPIO_42, Function0, OUTPUT_H },

+	/* GPIO_70 - WLAN_PE_RST_L */
+	{ GPIO_70, Function0, OUTPUT_H },
+
    /* GPIO_74 - LPC_CLK0_EC_R */
    { GPIO_74, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT },

@@ -197,9 +203,6 @@
    /* GPIO_2 - WLAN_PCIE_WAKE_3V3_ODL */
    { GPIO_2, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },

-	/* GPIO_4 - EN_PP3300_WLAN */
-	{ GPIO_4, Function0, OUTPUT_H },
-
    /* GPIO_10 - SLP_S0_L (currently not used) */
    { GPIO_10, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },

@@ -221,9 +224,6 @@
    /* GPIO_67 - PEN_RESET */
    { GPIO_67, Function0, OUTPUT_L },

-	/* GPIO_70 - WLAN_PE_RST_L */
-	{ GPIO_70, Function0, OUTPUT_H },
-
    /* GPIO_75 - Unused (strap) (R139/R130) */
    { GPIO_75, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },