Philipp Deppenwiese has submitted this change and it was merged. ( https://review.coreboot.org/28024 )
Change subject: mainboard/opencellular/elgon: Add mainboard support ......................................................................
mainboard/opencellular/elgon: Add mainboard support
Tested on Elgon EVT board and boots into GNU/Linux.
TODO: * Add hard reset function for VBOOT. * Add EC code * Add SPI flash write protection
Change-Id: I9b809306cc48facbade5dc63846c4532b397e0b5 Signed-off-by: Philipp Deppenwiese zaolin@das-labor.org Reviewed-on: https://review.coreboot.org/28024 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Philipp Deppenwiese zaolin.daisuki@gmail.com --- M Documentation/mainboard/index.md A Documentation/mainboard/opencellular/elgon.md A Documentation/mainboard/opencellular/elgon1.png A Documentation/mainboard/opencellular/elgon2.png A src/mainboard/opencellular/elgon/Kconfig A src/mainboard/opencellular/elgon/Kconfig.name A src/mainboard/opencellular/elgon/Makefile.inc A src/mainboard/opencellular/elgon/bdk_devicetree.c A src/mainboard/opencellular/elgon/board.fmd A src/mainboard/opencellular/elgon/board_info.txt A src/mainboard/opencellular/elgon/bootblock.c A src/mainboard/opencellular/elgon/death.c A src/mainboard/opencellular/elgon/devicetree.cb A src/mainboard/opencellular/elgon/gbcv2.dts A src/mainboard/opencellular/elgon/mainboard.c A src/mainboard/opencellular/elgon/mainboard.h A src/mainboard/opencellular/elgon/memlayout.ld A src/mainboard/opencellular/elgon/romstage.c A src/mainboard/opencellular/elgon/vboot.fmd 19 files changed, 1,346 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Philipp Deppenwiese: Looks good to me, approved
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md index 6c75ea2..45eb217 100644 --- a/Documentation/mainboard/index.md +++ b/Documentation/mainboard/index.md @@ -18,6 +18,10 @@
- [GA-H61M-S2PV](gigabyte/ga-h61m-s2pv.md)
+## Open Cellular + +- [Elgon](opencellular/elgon.md) + ## HP
- [Compaq 8200 Elite SFF](hp/compaq_8200_sff.md) diff --git a/Documentation/mainboard/opencellular/elgon.md b/Documentation/mainboard/opencellular/elgon.md new file mode 100644 index 0000000..37d05e6 --- /dev/null +++ b/Documentation/mainboard/opencellular/elgon.md @@ -0,0 +1,72 @@ +# Elgon + +This page describes how to run coreboot on the [Elgon] compute board +from [OpenCellular]. + +## TODO + +* Add hard reset control + +## Flashing coreboot + +```eval_rst ++---------------------+------------+ +| Type | Value | ++=====================+============+ +| Socketed flash | no | ++---------------------+------------+ +| Model | W25Q128 | ++---------------------+------------+ +| Size | 16 MiB | ++---------------------+------------+ +| In circuit flashing | yes | ++---------------------+------------+ +| Package | SOIC-8 | ++---------------------+------------+ +| Write protection | No | ++---------------------+------------+ +| Dual BIOS feature | No | ++---------------------+------------+ +| Internal flashing | yes | ++---------------------+------------+ +``` + +### Internal programming + +The SPI flash can be accessed using [flashrom]. + +### External programming + +The EVT board does have a pinheader to flash the SOIC-8 in circuit. +Directly connecting a Pomona test-clip on the flash is also possible. + +TODO: pinout + +**Total board view of EVT** + +![][elgon1] + +[elgon1]: elgon1.png + +**Closeup view of SOIC-8 flash IC, programming pin header and +USB serial connector of EVT** + +![][elgon2] + +[elgon2]: elgon2.png + +## Technology + +```eval_rst ++---------------+----------------------------------------+ +| SoC | :doc:`../../soc/cavium/cn81xx/index` | ++---------------+----------------------------------------+ +| CPU | Cavium ARMv8-Quadcore `CN81XX`_ | ++---------------+----------------------------------------+ + +.. _CN81XX: https://www.cavium.com/product-octeon-tx-cn80xx-81xx.html +``` + +[Elgon]: https://github.com/Telecominfraproject/OpenCellular +[OpenCellular]: https://code.fb.com/connectivity/introducing-opencellular-an-open-source-wir... +[flashrom]: https://flashrom.org/Flashrom diff --git a/Documentation/mainboard/opencellular/elgon1.png b/Documentation/mainboard/opencellular/elgon1.png new file mode 100644 index 0000000..c1eb544 --- /dev/null +++ b/Documentation/mainboard/opencellular/elgon1.png Binary files differ diff --git a/Documentation/mainboard/opencellular/elgon2.png b/Documentation/mainboard/opencellular/elgon2.png new file mode 100644 index 0000000..f12a734 --- /dev/null +++ b/Documentation/mainboard/opencellular/elgon2.png Binary files differ diff --git a/src/mainboard/opencellular/elgon/Kconfig b/src/mainboard/opencellular/elgon/Kconfig new file mode 100644 index 0000000..37a020a --- /dev/null +++ b/src/mainboard/opencellular/elgon/Kconfig @@ -0,0 +1,94 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2018 Facebook, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +if BOARD_OPENCELLULAR_ELGON + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select COMMON_CBFS_SPI_WRAPPER + select RTC + select SOC_CAVIUM_CN81XX + select SPI_FLASH + select SPI_FLASH_WINBOND + select MAINBOARD_HAS_I2C_TPM_GENERIC + select MAINBOARD_HAS_TPM1 + +config VBOOT + select VBOOT_NO_BOARD_SUPPORT + select GBB_FLAG_DISABLE_LID_SHUTDOWN + select GBB_FLAG_DISABLE_PD_SOFTWARE_SYNC + select GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC + select GBB_FLAG_DISABLE_FWMP + +config GBB_HWID + string + depends on VBOOT + default "ELGON" + +config MAINBOARD_DIR + string + default "opencellular/elgon" + +config DRIVER_TPM_I2C_BUS + hex + default 0x1 + +config DRIVER_TPM_I2C_ADDR + hex + default 0x20 + +config DRAM_SIZE_MB + int + default 4096 + +config BOOT_DEVICE_SPI_FLASH_BUS + int + default 0 + +config CONSOLE_SERIAL_UART_ADDRESS + hex + depends on DRIVERS_UART + default 0x87E028000000 + +config UART_FOR_CONSOLE + int + depends on DRIVERS_UART + default 0 + +config FMDFILE + string + default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/board.fmd" + default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/vboot.fmd" if VBOOT + +config MAX_CPUS + default 4 + +########################################################## +#### Update below when adding a new derivative board. #### +########################################################## +config DEVICETREE + string + default "devicetree.cb" + +config MAINBOARD_PART_NUMBER + string + default "Elgon" + +config MAINBOARD_FIT_DTS + string + default "gbcv2.dts" + +endif diff --git a/src/mainboard/opencellular/elgon/Kconfig.name b/src/mainboard/opencellular/elgon/Kconfig.name new file mode 100644 index 0000000..7d02111 --- /dev/null +++ b/src/mainboard/opencellular/elgon/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_OPENCELLULAR_ELGON + bool "Elgon (GBCv2)" diff --git a/src/mainboard/opencellular/elgon/Makefile.inc b/src/mainboard/opencellular/elgon/Makefile.inc new file mode 100644 index 0000000..343a52e --- /dev/null +++ b/src/mainboard/opencellular/elgon/Makefile.inc @@ -0,0 +1,31 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2017-present Facebook, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +bootblock-y += bootblock.c +bootblock-y += memlayout.ld +bootblock-y += death.c + +romstage-y += memlayout.ld +romstage-y += romstage.c +romstage-y += bdk_devicetree.c +romstage-y += death.c + +ramstage-y += mainboard.c +ramstage-y += memlayout.ld +ramstage-y += bdk_devicetree.c +ramstage-y += death.c + +verstage-y += memlayout.ld +verstage-y += death.c diff --git a/src/mainboard/opencellular/elgon/bdk_devicetree.c b/src/mainboard/opencellular/elgon/bdk_devicetree.c new file mode 100644 index 0000000..9f8c64e --- /dev/null +++ b/src/mainboard/opencellular/elgon/bdk_devicetree.c @@ -0,0 +1,106 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017-present Facebook, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +// This file is automatically generated. +// DO NOT EDIT BY HAND. + +#include <bdk-devicetree.h> + +const struct bdk_devicetree_key_value devtree[] = { +{"DDR-CONFIG-DQX-CTL", "0x4"}, +{"DDR-CONFIG-WODT-MASK.RANKS2.DIMMS2", "0xc0c0303"}, +{"DDR-CONFIG-WODT-MASK.RANKS4.DIMMS1", "0x1030203"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS1.RANK0", "0x4"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS2.RANK0", "0x4"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS2.RANK2", "0x4"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS1.RANK0", "0x2"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS1.RANK1", "0x2"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS2", "0x2"}, +{"DDR-CONFIG-MODE1-RTT-WR.RANKS4", "0x1"}, +{"DDR-CONFIG-MODE1-DIC.RANKS4.DIMMS1", "0x1"}, +{"DDR-CONFIG-MODE1-RTT-NOM.RANKS2.DIMMS2", "0x2"}, +{"DDR-CONFIG-MODE1-RTT-NOM.RANKS4.DIMMS1.RANK0", "0x4"}, +{"DDR-CONFIG-MODE1-RTT-NOM.RANKS4.DIMMS1.RANK2", "0x4"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS1.RANK0", "0x1"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2.RANK0", "0x5"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2.RANK2", "0x5"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1.RANK0", "0x2"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1.RANK1", "0x2"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS2", "0x1"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS4.DIMMS1.RANK0", "0x6"}, +{"DDR-CONFIG-MODE2-RTT-PARK.RANKS4.DIMMS1.RANK1", "0x6"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS1.RANK0", "0x22"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2.RANK0", "0x1f"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2.RANK2", "0x1f"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1.RANK0", "0x19"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1.RANK1", "0x19"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS2", "0x19"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS4.DIMMS1.RANK0", "0x1f"}, +{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS4.DIMMS1.RANK1", "0x1f"}, +{"DDR-CONFIG-RODT-CTL.RANKS1.DIMMS1", "0x7"}, +{"DDR-CONFIG-RODT-CTL.RANKS1.DIMMS2", "0x3"}, +{"DDR-CONFIG-RODT-CTL.RANKS2.DIMMS1", "0x3"}, +{"DDR-CONFIG-RODT-CTL.RANKS2.DIMMS2", "0x7"}, +{"DDR-CONFIG-RODT-CTL.RANKS4.DIMMS1", "0x7"}, +{"DDR-CONFIG-RODT-MASK.RANKS2.DIMMS2", "0x4080102"}, +{"DDR-CONFIG-RODT-MASK.RANKS4.DIMMS1", "0x1010202"}, +{"DDR-CONFIG-CUSTOM-MIN-RTT-NOM-IDX", "0x1"}, +{"DDR-CONFIG-CUSTOM-MAX-RTT-NOM-IDX", "0x7"}, +{"DDR-CONFIG-CUSTOM-MIN-RODT-CTL", "0x1"}, +{"DDR-CONFIG-CUSTOM-MAX-RODT-CTL", "0x7"}, +{"DDR-CONFIG-CUSTOM-OFFSET-EN", "0x1"}, +{"DDR-CONFIG-CUSTOM-OFFSET", "0x2"}, +{"DDR-CONFIG-CUSTOM-DDR2T", "0x1"}, +{"DDR-CONFIG-CUSTOM-MAXIMUM-ADJACENT-RLEVEL-DELAY-INCREMENT", "0x2"}, +{"DDR-CONFIG-CUSTOM-FPRCH2", "0x2"}, +{"PHY-ADDRESS.N0.BGX0.P0", "0x00001000"}, +{"PHY-ADDRESS.N0.BGX2.P0", "0x00001000"}, +{"BGX-ENABLE.N0.BGX0.P0", "1"}, +{"BGX-ENABLE.N0.BGX0.P1", "0"}, +{"BGX-ENABLE.N0.BGX0.P2", "0"}, +{"BGX-ENABLE.N0.BGX0.P3", "0"}, +{"BGX-ENABLE.N0.BGX1.P0", "0"}, +{"BGX-ENABLE.N0.BGX1.P1", "0"}, +{"BGX-ENABLE.N0.BGX2.P0", "1"}, +{"BDK-NUM-PACKET-BUFFERS", "0x1000"}, +{"BDK-PACKET-BUFFER-SIZE", "0x400"}, +{"BDK-SHOW-LINK-STATUS", "1"}, +{"BDK-COREMASK", "0"}, +{"BDK-BOOT-MENU-TIMEOUT", "0x05"}, +{"BDK-BOOT-PATH-OPTION", "0"}, +{"BDK-CONFIG-TRACE", "1"}, +{"MULTI-NODE", "0"}, +{"QLM-AUTO-CONFIG", "0"}, +{"QLM-DIP-AUTO-CONFIG", "0"}, +{"QLM-MODE.N0.QLM0", "PCIE_1X1"}, +{"QLM-MODE.N0.QLM1", "SGMII_2X1"}, +{"QLM-MODE.N0.QLM2", "PCIE_1X2"}, +{"QLM-MODE.N0.QLM3", "SATA_2X1"}, +{"QLM-FREQ.N0.QLM0", "6000"}, +{"QLM-FREQ.N0.QLM1", "1250"}, +{"QLM-FREQ.N0.QLM2", "6000"}, +{"QLM-FREQ.N0.QLM3", "6000"}, +{"QLM-CLK.N0.QLM0", "2"}, +{"QLM-CLK.N0.QLM1", "2"}, +{"QLM-CLK.N0.QLM2", "2"}, +{"QLM-CLK.N0.QLM3", "2"}, +{"DDR-SPEED.N0", "1600"}, +{"DDR-CONFIG-SPD-ADDR.DIMM0.LMC0", "0x1050"}, +{"USB-REFCLK-SRC.N0.PORT0", "0"}, +{"GPIO-PIN-SELECT-GPIO45", "0x2"}, +{"GPIO-PIN-SELECT-GPIO46", "0x250"}, +{0, 0}, +}; diff --git a/src/mainboard/opencellular/elgon/board.fmd b/src/mainboard/opencellular/elgon/board.fmd new file mode 100644 index 0000000..784f3b0 --- /dev/null +++ b/src/mainboard/opencellular/elgon/board.fmd @@ -0,0 +1,15 @@ +FLASH@0x0 16M { + WP_RO@0x0 0x1000000 { + RO_SECTION@0x0 0xffc000 { + # 0 - 0x10000 is free for firmware usage. + # bootblock starts at 0x20000 + FMAP@0x0 0x1000 + # bootblock includes trusted/non-trusted CLIB, CSIB, + # and BL1FWs packaged in + # src/soc/cavium/common/Makefile.inc. + BOOTBLOCK@0x10000 0x70000 + COREBOOT(CBFS)@0x80000 0xf7c000 + } + RO_VPD@0xffc000 0x4000 + } +} diff --git a/src/mainboard/opencellular/elgon/board_info.txt b/src/mainboard/opencellular/elgon/board_info.txt new file mode 100644 index 0000000..06dcd35 --- /dev/null +++ b/src/mainboard/opencellular/elgon/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Open Cellular +Board name: Elgon +Category: sbc +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/opencellular/elgon/bootblock.c b/src/mainboard/opencellular/elgon/bootblock.c new file mode 100644 index 0000000..e6109f1 --- /dev/null +++ b/src/mainboard/opencellular/elgon/bootblock.c @@ -0,0 +1,56 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Facebook, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <bootblock_common.h> +#include <soc/soc.h> +#include <soc/spi.h> +#include <soc/uart.h> +#include <soc/gpio.h> +#include "mainboard.h" + +void bootblock_mainboard_early_init(void) +{ + /* Route UART0 to CON1 */ + gpio_output(ELGON_GPIO_UART_SEL, 0); + + /* Turn off error LED */ + gpio_output(ELGON_GPIO_ERROR_LED, 0); + + if (IS_ENABLED(CONFIG_BOOTBLOCK_CONSOLE)) { + if (!uart_is_enabled(CONFIG_UART_FOR_CONSOLE)) + uart_setup(CONFIG_UART_FOR_CONSOLE, CONFIG_TTYS0_BAUD); + } +} + +static void configure_spi_flash(void) +{ + /* The maximum SPI frequency for error free transmission is at 30 Mhz */ + spi_init_custom(0, // bus + 28000000, // speed Hz + 0, // idle low disabled + 0, // zero idle cycles between transfers + 0, // MSB first + 0, // Chip select 0 + 1); // assert is high + + /* Route SPI to SoC */ + gpio_output(ELGON_GPIO_SPI_MUX, 1); +} + +void bootblock_mainboard_init(void) +{ + configure_spi_flash(); + // FIXME: Check SPI flash WP bits +} diff --git a/src/mainboard/opencellular/elgon/death.c b/src/mainboard/opencellular/elgon/death.c new file mode 100644 index 0000000..ac58e84 --- /dev/null +++ b/src/mainboard/opencellular/elgon/death.c @@ -0,0 +1,32 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017-present Facebook, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <soc/gpio.h> +#include <console/console.h> +#include <delay.h> +#include "mainboard.h" + +void die_notify(void) +{ + const u32 rate = 1000 / 10; // blink at 5 Hz + + do { + gpio_output(ELGON_GPIO_ERROR_LED, 0); + mdelay(rate); + gpio_output(ELGON_GPIO_ERROR_LED, 1); + mdelay(rate); + } while (1); +} diff --git a/src/mainboard/opencellular/elgon/devicetree.cb b/src/mainboard/opencellular/elgon/devicetree.cb new file mode 100644 index 0000000..07d508a --- /dev/null +++ b/src/mainboard/opencellular/elgon/devicetree.cb @@ -0,0 +1,210 @@ +## +## This file is part of the coreboot project. +## +## Copyright 2017-present Facebook, Inc. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## + +chip soc/cavium/cn81xx + device cpu_cluster 0 on end + + device domain 0 on + chip soc/cavium/common/pci + register "secure" = "0" + device pci 01.0 on # PCI bridge + chip soc/cavium/common/pci + register "secure" = "0" + device pci 00.0 on end # MRML + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 00.1 on end # RESET + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 00.2 on end # DAP + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 00.3 on end # MDIO + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 00.4 on end # FUSE + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 01.2 on end # SGPIO + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 01.3 on end # SMI + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 01.4 on end # MMC + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 01.5 on end # KEY + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 01.6 on end # BOOT BUS + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 01.7 on end # PBUS + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 02.0 on end # XCV + end + device pci 04.0 on end + + chip soc/cavium/common/pci + register "secure" = "0" + device pci 06.0 on end # L2C-TAD + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 07.0 on end # L2C-CBC + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 07.4 on end # L2C-MCI + end + + chip soc/cavium/common/pci + register "secure" = "1" + device pci 08.0 on end # UUA0 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 08.1 on end # UUA1 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 08.2 off end # UUA2 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 08.3 off end # UUA3 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 08.4 on end # VRM + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 09.0 on end # I2C0 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 09.1 on end # I2C1 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 0a.0 on end # PCC Bridge + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 0b.0 on end # IOBN + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 0c.0 on end # OCLA0 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 0c.1 on end # OCLA1 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 0d.0 on end + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 0e.0 on end # PCIe0 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 0e.1 on end # PCIe1 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 0e.2 on end # PCIe2 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 10.0 on end # bgx0 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 10.1 off end # bgx1 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 11.0 on end # rgx0 + end + chip soc/cavium/common/pci + register "secure" = "0" + device pci 12.0 on end # MAC + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 1c.0 on end # GSER0 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 1c.1 on end # GSER1 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 1c.2 on end # GSER2 + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 1c.3 on end # GSER3 + end + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 02.0 on end #SMMU + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 03.0 on end #GIC + end + chip soc/cavium/common/pci + register "secure" = "1" + device pci 04.0 on end #GTI + end + + device pci 05.0 on end # NIC + device pci 06.0 on end # GPIO + device pci 07.0 on end # SPI + device pci 08.0 on end # MIO + device pci 09.0 on end # PCI bridge + device pci 0a.0 on end # PCI bridge + device pci 0b.0 on end # NFC + device pci 0c.0 on end # PCI bridge + device pci 0d.0 on end # PCM + device pci 0e.0 on end # VRM + device pci 0f.0 on end # PCI bridge + + device pci 10.0 on end # USB0 + device pci 11.0 on end # USB1 + device pci 16.0 on end # SATA0 + device pci 17.0 on end # SATA1 + end + end +end diff --git a/src/mainboard/opencellular/elgon/gbcv2.dts b/src/mainboard/opencellular/elgon/gbcv2.dts new file mode 100644 index 0000000..2997947 --- /dev/null +++ b/src/mainboard/opencellular/elgon/gbcv2.dts @@ -0,0 +1,490 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2018 Facebook, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +/ { + model = "Cavium ThunderX CN81XX board"; + compatible = "cavium,thunder-81xx"; + interrupt-parent = <0x1>; + #address-cells = <0x2>; + #size-cells = <0x2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu-map { + + cluster0 { + + core0 { + cpu = <0x2>; + }; + + core1 { + cpu = <0x3>; + }; + + core2 { + cpu = <0x4>; + }; + + core3 { + cpu = <0x5>; + }; + }; + }; + + cpu@0 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + numa-node-id = <0x0>; + next-level-cache = <0x6>; + linux,phandle = <0x2>; + phandle = <0x2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + numa-node-id = <0x0>; + next-level-cache = <0x6>; + linux,phandle = <0x3>; + phandle = <0x3>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + numa-node-id = <0x0>; + next-level-cache = <0x6>; + linux,phandle = <0x4>; + phandle = <0x4>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + numa-node-id = <0x0>; + next-level-cache = <0x6>; + linux,phandle = <0x5>; + phandle = <0x5>; + }; + }; + + l2-cache0 { + compatible = "cache"; + numa-node-id = <0x0>; + linux,phandle = <0x6>; + phandle = <0x6>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <0x1 0xd 0x4 0x1 0xe 0x4 0x1 0xb 0x4 0x1 0xa 0x4>; + }; + + pmu { + compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3"; + interrupts = <0x1 0x7 0x4>; + }; + + mmc_supply_3v3 { + compatible = "regulator-fixed"; + regulator-name = "mmc_supply_3v3"; + regulator-min-microvolt = <0x325aa0>; + regulator-max-microvolt = <0x325aa0>; + gpio = <0x7 0x8 0x0>; + enable-active-high; + linux,phandle = <0xf>; + phandle = <0xf>; + }; + + interrupt-controller@801000000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <0x3>; + #address-cells = <0x2>; + #size-cells = <0x2>; + #redistributor-regions = <0x1>; + ranges; + interrupt-controller; + reg = <0x8010 0x0 0x0 0x10000 0x8010 0x80000000 0x0 0x600000>; + interrupts = <0x1 0x9 0x4>; + linux,phandle = <0x1>; + phandle = <0x1>; + + gic-its@801000020000 { + compatible = "arm,gic-v3-its"; + reg = <0x8010 0x20000 0x0 0x200000>; + msi-controller; + numa-node-id = <0x0>; + linux,phandle = <0xd>; + phandle = <0xd>; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <0x2>; + #size-cells = <0x2>; + ranges; + numa-node-id = <0x0>; + + refclkuaa { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <0x6f3c900>; + clock-output-names = "refclkuaa"; + linux,phandle = <0x8>; + phandle = <0x8>; + }; + + sclk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <0x2faf0800>; + clock-output-names = "sclk"; + linux,phandle = <0xe>; + phandle = <0xe>; + }; + + serial@87e028000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x28000000 0x0 0x1000>; + interrupts = <0x0 0x5 0x4>; + clocks = <0x8>; + clock-names = "apb_pclk"; + skip-init; + }; + + serial@87e029000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x29000000 0x0 0x1000>; + interrupts = <0x0 0x6 0x4>; + clocks = <0x8>; + clock-names = "apb_pclk"; + skip-init; + }; + + serial@87e02a000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x2a000000 0x0 0x1000>; + interrupts = <0x0 0x7 0x4>; + clocks = <0x8>; + clock-names = "apb_pclk"; + skip-init; + }; + + serial@87e02b000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x2b000000 0x0 0x1000>; + interrupts = <0x0 0x8 0x4>; + clocks = <0x8>; + clock-names = "apb_pclk"; + skip-init; + }; + + watch-dog@8440000a0000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x8440 0xa0000 0x0 0x1000 0x8440 0xb0000 0x0 0x1000>; + interrupts = <0x0 0x9 0x4>; + }; + + smmu0@830000000000 { + compatible = "cavium,smmu-v2"; + reg = <0x8300 0x0 0x0 0x2000000>; + #global-interrupts = <0x1>; + interrupts = <0x0 0x44 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4 0x0 0x45 0x4>; + mmu-masters = <0x9 0x100 0xa 0x200 0xb 0x300 0xc 0x400>; + }; + + pci@848000000000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + msi-parent = <0xd>; + msi-map = <0x0 0xd 0x0 0x10000>; + bus-range = <0x0 0x1f>; + #size-cells = <0x2>; + #address-cells = <0x3>; + #stream-id-cells = <0x1>; + dma-coherent; + reg = <0x8480 0x0 0x0 0x2000000>; + ranges = <0x3000000 0x8010 0x0 0x8010 0x0 0x80 0x0 0x3000000 0x8100 0x0 0x8100 0x0 0x80 0x0 0x3000000 0x8680 0x0 0x8680 0x0 0x160 0x28000000 0x3000000 0x87e0 0x2c000000 0x87e0 0x2c000000 0x0 0x94000000 0x3000000 0x8400 0x0 0x8400 0x0 0x10 0x0 0x3000000 0x8430 0x0 0x8430 0x0 0x2 0x0 0x3000000 0x87e0 0xc6000000 0x87e0 0xc6000000 0x1f 0x3a000000>; + linux,phandle = <0x9>; + phandle = <0x9>; + + mrml-bridge0@1,0 { + compatible = "pci-bridge", "cavium,thunder-8890-mrml-bridge"; + #size-cells = <0x2>; + #address-cells = <0x3>; + ranges = <0x3000000 0x87e0 0x0 0x3000000 0x87e0 0x0 0x10 0x0>; + reg = <0x800 0x0 0x0 0x0 0x0>; + device_type = "pci"; + + mdio-nexus@1,3 { + compatible = "cavium,thunder-8890-mdio-nexus"; + #address-cells = <0x2>; + #size-cells = <0x2>; + reg = <0xb00 0x0 0x0 0x0 0x0>; + assigned-addresses = <0x3000000 0x87e0 0x5000000 0x0 0x800000>; + ranges = <0x87e0 0x5000000 0x3000000 0x87e0 0x5000000 0x0 0x800000>; + + mdio0@87e005003800 { + compatible = "cavium,thunder-8890-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0x87e0 0x5003800 0x0 0x30>; + }; + + mdio1@87e005003880 { + compatible = "cavium,thunder-8890-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0x87e0 0x5003880 0x0 0x30>; + }; + }; + + mmc@1,4 { + compatible = "cavium,thunder-8890-mmc"; + reg = <0xc00 0x0 0x0 0x0 0x0>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <0xe>; + + mmc-slot@0 { + compatible = "mmc-slot"; + reg = <0x0>; + vmmc-supply = <0xf>; + max-frequency = <0x18cba80>; + no-1-8-v; + bus-width = <0x4>; + disable-wp; + broken-cd; + sd-uhs-sdr25; + sd-uhs-ddr50; + sd-uhs-sdr50; + cap-sd-highspeed; + no-sdio; + no-mmc; + }; + }; + + i2c@9,0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,thunder-8890-twsi"; + reg = <0x4800 0x0 0x0 0x0 0x0>; + clock-frequency = <0x186a0>; + clocks = <0xe>; + + idt-ptp@0x52 { + compatible = "idt,82p33914-1"; + reg = <0x52>; + }; + }; + + i2c@9,1 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,thunder-8890-twsi"; + reg = <0x4900 0x0 0x0 0x0 0x0>; + clock-frequency = <0x186a0>; + clocks = <0xe>; + + rom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + pagesize = <0x40>; + }; + + rtc@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + }; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; + + rgx0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,thunder-8890-bgx"; + reg = <0x9000 0x0 0x0 0x0 0x0>; + + rgmii00 { + reg = <0x0>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + + bgx0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,thunder-8890-bgx"; + reg = <0x8000 0x0 0x0 0x0 0x0>; + + sgmii00 { + reg = <0x0>; + qlm-mode = "0x000,sgmii"; + local-mac-address = [00 00 00 00 00 00]; + cavium,disable-autonegotiation; + }; + }; + + bgx1 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,thunder-8890-bgx"; + reg = <0x8100 0x0 0x0 0x0 0x0>; + }; + }; + + spi@7,0 { + compatible = "cavium,thunder-8190-spi"; + reg = <0x3800 0x0 0x0 0x0 0x0>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <0xe>; + + flash@0 { + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <104000000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + }; + }; + + gpio0@6,0 { + #gpio-cells = <0x2>; + compatible = "cavium,thunder-8890-gpio"; + gpio-controller; + reg = <0x3000 0x0 0x0 0x0 0x0>; + linux,phandle = <0x7>; + phandle = <0x7>; + }; + + nand@b,0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,cn8130-nand"; + reg = <0x5800 0x0 0x0 0x0 0x0>; + clocks = <0xe>; + }; + }; + + pci@87e0c0000000 { + compatible = "cavium,pci-host-thunder-pem"; + device_type = "pci"; + msi-parent = <0xd>; + msi-map = <0x0 0xd 0x0 0x10000>; + bus-range = <0x1f 0x57>; + #size-cells = <0x2>; + #address-cells = <0x3>; + #stream-id-cells = <0x1>; + dma-coherent; + reg = <0x8800 0x1f000000 0x0 0x39000000 0x87e0 0xc0000000 0x0 0x1000000>; + ranges = <0x1000000 0x0 0x0 0x8830 0x0 0x0 0x10000 0x3000000 0x0 0x10000000 0x8810 0x10000000 0xf 0xf0000000 0x43000000 0x10 0x0 0x8820 0x0 0x10 0x0 0x3000000 0x87e0 0xc0000000 0x87e0 0xc0000000 0x0 0x1000000>; + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x10 0x4 0x0 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x11 0x4 0x0 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x12 0x4 0x0 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x13 0x4>; + linux,phandle = <0xa>; + phandle = <0xa>; + }; + + pci@87e0c1000000 { + compatible = "cavium,pci-host-thunder-pem"; + device_type = "pci"; + msi-parent = <0xd>; + msi-map = <0x0 0xd 0x0 0x10000>; + bus-range = <0x57 0x8f>; + #size-cells = <0x2>; + #address-cells = <0x3>; + #stream-id-cells = <0x1>; + dma-coherent; + reg = <0x8840 0x57000000 0x0 0x39000000 0x87e0 0xc1000000 0x0 0x1000000>; + ranges = <0x1000000 0x0 0x10000 0x8870 0x10000 0x0 0x10000 0x3000000 0x0 0x10000000 0x8850 0x10000000 0xf 0xf0000000 0x43000000 0x10 0x0 0x8860 0x0 0x10 0x0 0x3000000 0x87e0 0xc1000000 0x87e0 0xc1000000 0x0 0x1000000>; + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x14 0x4 0x0 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x15 0x4 0x0 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x16 0x4 0x0 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x17 0x4>; + linux,phandle = <0xb>; + phandle = <0xb>; + }; + + pci@87e0c2000000 { + compatible = "cavium,pci-host-thunder-pem"; + device_type = "pci"; + msi-parent = <0xd>; + msi-map = <0x0 0xd 0x0 0x10000>; + bus-range = <0x8f 0xc7>; + #size-cells = <0x2>; + #address-cells = <0x3>; + #stream-id-cells = <0x1>; + dma-coherent; + reg = <0x8880 0x8f000000 0x0 0x39000000 0x87e0 0xc2000000 0x0 0x1000000>; + ranges = <0x1000000 0x0 0x20000 0x88b0 0x20000 0x0 0x10000 0x3000000 0x0 0x10000000 0x8890 0x10000000 0xf 0xf0000000 0x43000000 0x10 0x0 0x88a0 0x0 0x10 0x0 0x3000000 0x87e0 0xc2000000 0x87e0 0xc2000000 0x0 0x1000000>; + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x0 0x0 0x0 0x18 0x4 0x0 0x0 0x0 0x2 0x1 0x0 0x0 0x0 0x19 0x4 0x0 0x0 0x0 0x3 0x1 0x0 0x0 0x0 0x1a 0x4 0x0 0x0 0x0 0x4 0x1 0x0 0x0 0x0 0x1b 0x4>; + linux,phandle = <0xc>; + phandle = <0xc>; + }; + + tdm@d,0 { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "cavium,thunder-8190-tdm"; + reg = <0x6800 0x0 0x0 0x0>; + clocks = <0xe>; + }; + }; + + aliases { + serial0 = "/soc@0/serial@87e028000000"; + serial1 = "/soc@0/serial@87e029000000"; + serial2 = "/soc@0/serial@87e02a000000"; + serial3 = "/soc@0/serial@87e02b000000"; + i2c0 = "/soc@0/pci@848000000000/mrml-bridge0@1,0/i2c@9,0"; + i2c1 = "/soc@0/pci@848000000000/mrml-bridge0@1,0/i2c@9,1"; + spi0 = "/soc@0/pci@848000000000/spi@7,0"; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1400000 0x0 0x7ec00000>; + numa-node-id = <0x0>; + }; +}; diff --git a/src/mainboard/opencellular/elgon/mainboard.c b/src/mainboard/opencellular/elgon/mainboard.c new file mode 100644 index 0000000..dc06bdc --- /dev/null +++ b/src/mainboard/opencellular/elgon/mainboard.c @@ -0,0 +1,130 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017-2018 Facebook, Inc. + * Copyright 2003-2017 Cavium Inc. (support@cavium.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0. + */ + +#include <device/device.h> +#include <libbdk-hal/bdk-config.h> +#include <libbdk-hal/bdk-twsi.h> +#include <soc/gpio.h> +#include <delay.h> +#include <soc/uart.h> +#include <console/console.h> +#include <soc/clock.h> +#include <soc/gpio.h> +#include <soc/timer.h> +#include <soc/cpu.h> +#include <soc/sdram.h> +#include <soc/spi.h> +#include <spi_flash.h> +#include <fmap.h> +#include <libbdk-hal/bdk-config.h> + +static void mainboard_print_info(void) +{ + struct region region; + + if (fmap_locate_area("WP_RO", ®ion) < 0) { + printk(BIOS_ERR, "MB: Could not find region '%s'\n", "WP_RO"); + } else { + const struct spi_flash *flash = boot_device_spi_flash(); + const bool prot = (flash != NULL) && + (spi_flash_is_write_protected(flash, ®ion) == 1); + printk(BIOS_INFO, "MB: WP_RO is %swrite protected\n", + prot ? "" : "not "); + } + + printk(BIOS_INFO, "MB: trusted boot : %s\n", + gpio_strap_value(10) ? "yes" : "no"); + + const size_t boot_method = gpio_strap_value(0) | + (gpio_strap_value(1) << 1) | + (gpio_strap_value(2) << 2) | + (gpio_strap_value(3) << 3); + + printk(BIOS_INFO, "MB: boot method : "); + switch (boot_method) { + case 0x2: + case 0x3: + printk(BIOS_INFO, "EMMC\n"); + break; + case 0x5: + case 0x6: + printk(BIOS_INFO, "SPI\n"); + break; + case 0x8: + printk(BIOS_INFO, "REMOTE\n"); + break; + case 0xc: + case 0xd: + printk(BIOS_INFO, "PCIe\n"); + break; + default: + printk(BIOS_INFO, "unknown\n"); + } + + printk(BIOS_INFO, "MB: REFclk : %llu MHz\n", + thunderx_get_ref_clock() / 1000000ULL); + + printk(BIOS_INFO, "MB: IOclk : %llu MHz\n", + thunderx_get_io_clock() / 1000000ULL); + + printk(BIOS_INFO, "MB: COREclk : %llu MHz\n", + thunderx_get_core_clock() / 1000000ULL); + + printk(BIOS_INFO, "MB: #CPU cores : %zu\n", + cpu_get_num_available_cores()); + + printk(BIOS_INFO, "MB: RAM : %zu MiB\n", + sdram_size_mb()); + + printk(BIOS_INFO, "MB: SPIclk : %llu kHz\n", + spi_get_clock(0) >> 10); +} + +extern const struct bdk_devicetree_key_value devtree[]; + +static void mainboard_init(struct device *dev) +{ + size_t i; + + /* Init UARTs */ + for (i = 0; i < 4; i++) { + if (!uart_is_enabled(i)) + uart_setup(i, 0); + } + + /* Init timer */ + soc_timer_init(); + + /* Init CPUs */ + for (i = 1; i < CONFIG_MAX_CPUS; i++) + start_cpu(i, NULL); +} + +static void mainboard_enable(struct device *dev) +{ + dev->ops->init = &mainboard_init; + + bdk_config_set_fdt(devtree); + + mainboard_print_info(); +} + +struct chip_operations mainboard_ops = { + .name = CONFIG_MAINBOARD_PART_NUMBER, + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/opencellular/elgon/mainboard.h b/src/mainboard/opencellular/elgon/mainboard.h new file mode 100644 index 0000000..f268649 --- /dev/null +++ b/src/mainboard/opencellular/elgon/mainboard.h @@ -0,0 +1,19 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017-present Facebook, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#define ELGON_GPIO_ERROR_LED 11 +#define ELGON_GPIO_SPI_MUX 24 +#define ELGON_GPIO_UART_SEL 26 diff --git a/src/mainboard/opencellular/elgon/memlayout.ld b/src/mainboard/opencellular/elgon/memlayout.ld new file mode 100644 index 0000000..9349362 --- /dev/null +++ b/src/mainboard/opencellular/elgon/memlayout.ld @@ -0,0 +1 @@ + #include <soc/memlayout.ld> diff --git a/src/mainboard/opencellular/elgon/romstage.c b/src/mainboard/opencellular/elgon/romstage.c new file mode 100644 index 0000000..1b64765 --- /dev/null +++ b/src/mainboard/opencellular/elgon/romstage.c @@ -0,0 +1,48 @@ +/* + * This file is part of the coreboot project. + * + * Copyright 2017-present Facebook, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <arch/exception.h> +#include <cbmem.h> +#include <romstage_handoff.h> +#include <soc/sdram.h> +#include <soc/timer.h> +#include <soc/mmu.h> +#include <stdlib.h> +#include <console/console.h> +#include <program_loading.h> +#include <libbdk-hal/bdk-config.h> +#include <string.h> +#include <arch/stages.h> + +extern const struct bdk_devicetree_key_value devtree[]; + +void platform_romstage_main(void) +{ + watchdog_poke(0); + + console_init(); + exception_init(); + + bdk_config_set_fdt(devtree); + + sdram_init(); + soc_mmu_init(); + + watchdog_poke(0); + + cbmem_initialize_empty(); + run_ramstage(); +} diff --git a/src/mainboard/opencellular/elgon/vboot.fmd b/src/mainboard/opencellular/elgon/vboot.fmd new file mode 100644 index 0000000..b9a1edf --- /dev/null +++ b/src/mainboard/opencellular/elgon/vboot.fmd @@ -0,0 +1,30 @@ +FLASH@0x0 16M { + # must use a power of two in MiB for WP_RO + WP_RO@0x0 0x400000 { + RO_SECTION@0x0 0x3fc000 { + # 0 - 0x10000 is free for firmware usage. + # bootblock starts at 0x20000 + FMAP@0x0 0x1000 + RO_FRID@0x1000 0x100 + # bootblock includes trusted/non-trusted CLIB, CSIB, + # and BL1FWs packaged in + # src/soc/cavium/common/Makefile.inc. + BOOTBLOCK@0x10000 0x70000 + COREBOOT(CBFS)@0x80000 0x2fc000 + GBB@0x37c000 0x80000 + } + RO_VPD@0x3fc000 0x4000 + } + RW_SECTION_A@0x400000 0x5fa000 { + VBLOCK_A@0x0 0x2000 + FW_MAIN_A(CBFS)@0x2000 0x5f7f00 + RW_FWID_A@0x5f9f00 0x100 + } + RW_SECTION_B@0x9fa000 0x5fa000 { + VBLOCK_B@0x0 0x2000 + FW_MAIN_B(CBFS)@0x2000 0x5f7f00 + RW_FWID_B@0x5f9f00 0x100 + } + RW_ELOG@0xff4000 0x4000 + RW_VPD@0xff8000 0x8000 +}
-
Philipp Deppenwiese (Code Review)