Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10063
-gerrit
commit c69f6406904fb60e1942d1a0242f584486fbdb9b Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Sun May 3 06:27:11 2015 +0300
usbdebug: Add FTDI FT232H support
Tested with gizmosphere/gizmo1 Explorer add-on board, which exposes the following device:
0x0403 Future Technology Devices International, Ltd 0x6014 FT232H Single HS USB-UART/FIFO IC
For now UART is hard-coded to 115200, 8n1, no flow-control.
Change-Id: I4081f84f7700751ccbf079e7fcbb1467aa71d872 Signed-off-by: Nico Huber nico.h@gmx.de Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/drivers/usb/Kconfig | 6 ++++ src/drivers/usb/gadget.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 91 insertions(+), 2 deletions(-)
diff --git a/src/drivers/usb/Kconfig b/src/drivers/usb/Kconfig index b0baa42..c5c1ec7 100644 --- a/src/drivers/usb/Kconfig +++ b/src/drivers/usb/Kconfig @@ -89,6 +89,12 @@ config USBDEBUG_DONGLE_BEAGLEBONE_BLACK help Use this with BeagleBone Black.
+config USBDEBUG_DONGLE_FTDI_FT232H + bool "FTDI FT232H UART" + help + Use this with FT232H usb-to-uart. Configuration is hard-coded + to use 115200, 8n1, no flow control. + endchoice
config USBDEBUG_OPTIONAL_HUB_PORT diff --git a/src/drivers/usb/gadget.c b/src/drivers/usb/gadget.c index 5dd7993..7f88149 100644 --- a/src/drivers/usb/gadget.c +++ b/src/drivers/usb/gadget.c @@ -224,6 +224,85 @@ small_write: return 0; }
+/* FTDI FT232H UART programming. */ +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST 0x02 +#define FTDI_SIO_SET_BAUDRATE_REQUEST 0x03 +#define FTDI_SIO_SET_DATA_REQUEST 0x04 +#define FTDI_SIO_SET_BITMODE_REQUEST 0x0b + +static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe) +{ + int ret; + u8 devnum = 0; + u8 uart_if = 1; /* FTDI_INTERFACE_A 1 */ + + /* Move the device to 127 if it isn't already there */ + ret = dbgp_control_msg(ehci_debug, devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); + if (ret < 0) { + dprintk(BIOS_INFO, "Could not move attached device to %d.\n", + USB_DEBUG_DEVNUM); + return -2; + } + devnum = USB_DEBUG_DEVNUM; + dprintk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum); + + /* Send Set Configure request to device. */ + ret = dbgp_control_msg(ehci_debug, devnum, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0); + if (ret < 0) { + dprintk(BIOS_INFO, "FTDI set configuration failed.\n"); + return -2; + } + + ret = dbgp_control_msg(ehci_debug, devnum, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + FTDI_SIO_SET_BITMODE_REQUEST, 0, uart_if, NULL, 0); + if (ret < 0) { + dprintk(BIOS_INFO, "FTDI SET_BITMODE failed.\n"); + return -3; + } + ret = dbgp_control_msg(ehci_debug, devnum, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + FTDI_SIO_SET_BAUDRATE_REQUEST, + 0xc068, 0x0200 | uart_if, NULL, 0); + if (ret < 0) { + dprintk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n"); + return -3; + } + ret = dbgp_control_msg(ehci_debug, devnum, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + FTDI_SIO_SET_DATA_REQUEST, + 0x0008, uart_if, NULL, 0); + if (ret < 0) { + dprintk(BIOS_INFO, "FTDI SET_DATA failed.\n"); + return -3; + } + ret = dbgp_control_msg(ehci_debug, devnum, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + 0x0000, uart_if, NULL, 0); + if (ret < 0) { + dprintk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n"); + return -3; + } + + pipe[DBGP_CONSOLE_EPOUT].endpoint = 0x02; + pipe[DBGP_CONSOLE_EPIN].endpoint = 0x81; + + ack_set_configuration(pipe, devnum, 1000); + + /* Perform a small write. */ + ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n", 5); + if (ret < 0) { + dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret); + return -4; + } + dprintk(BIOS_INFO, "Test write done\n"); + return 0; +}
int dbgp_probe_gadget(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe) { @@ -238,9 +317,13 @@ int dbgp_probe_gadget(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe) } }
- ret = probe_for_debug_descriptor(ehci_debug, pipe); + if (IS_ENABLED(CONFIG_USBDEBUG_DONGLE_FTDI_FT232H)) { + ret = probe_for_ftdi(ehci_debug, pipe); + } else { + ret = probe_for_debug_descriptor(ehci_debug, pipe); + } if (ret < 0) { - dprintk(BIOS_INFO, "Could not enable gadget using Debug Descriptor.\n"); + dprintk(BIOS_INFO, "Could not enable debug dongle.\n"); return ret; }
-
Kyösti Mälkki