Change in coreboot[master]: amd/stoneyridge: Use BIOS_DEBUG to log PM1 and PMxC0 status

[Edward Hill (Code Review)]

Edward Hill has uploaded this change for review. ( https://review.coreboot.org/28885

Change subject: amd/stoneyridge: Use BIOS_DEBUG to log PM1 and PMxC0 status
......................................................................

amd/stoneyridge: Use BIOS_DEBUG to log PM1 and PMxC0 status

Use BIOS_DEBUG consistently to log PM1 and PMxC0 status registers
on boot. print_num_status_bits() was already using BIOS_DEBUG.

TEST=Inspect console for Grunt
BUG=b:110788201

Change-Id: If7da8c7c86e90a661338903ad05cc41e11f507d2
Signed-off-by: Edward Hill 
---
M src/soc/amd/stoneyridge/southbridge.c
1 file changed, 6 insertions(+), 7 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/85/28885/1

diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c
index b122f83..763ddd7 100644
--- a/src/soc/amd/stoneyridge/southbridge.c
+++ b/src/soc/amd/stoneyridge/southbridge.c
@@ -667,7 +667,7 @@
    /* PMxC0 S5/Reset Status shows the source of previous reset. */
    uint32_t pmxc0_status = pm_read32(PM_RST_STATUS);

-	static const char *const pmxc0_status_bits[] = {
+	static const char *const pmxc0_status_bits[32] = {
    	[0] = "ThermalTrip",
    	[1] = "FourSecondPwrBtn",
    	[2] = "Shutdown",
@@ -688,13 +688,12 @@
    	[27] = "SyncFlood",
    	[28] = "HangReset",
    	[29] = "EcWatchdogRst",
-		[31] = "BIT31",
    };

-	printk(BIOS_SPEW, "PMxC0 STATUS: 0x%x ", pmxc0_status);
+	printk(BIOS_DEBUG, "PMxC0 STATUS: 0x%x ", pmxc0_status);
    print_num_status_bits(ARRAY_SIZE(pmxc0_status_bits), pmxc0_status,
    		      pmxc0_status_bits);
-	printk(BIOS_SPEW, "\n");
+	printk(BIOS_DEBUG, "\n");
 }

/* After console init */
@@ -763,7 +762,7 @@

static uint16_t print_pm1_status(uint16_t pm1_sts)
 {
-	static const char *const pm1_sts_bits[] = {
+	static const char *const pm1_sts_bits[16] = {
    	[0] = "TMROF",
    	[4] = "BMSTATUS",
    	[5] = "GBL",
@@ -776,9 +775,9 @@
    if (!pm1_sts)
    	return 0;

-	printk(BIOS_SPEW, "PM1_STS: ");
+	printk(BIOS_DEBUG, "PM1_STS: ");
    print_num_status_bits(ARRAY_SIZE(pm1_sts_bits), pm1_sts, pm1_sts_bits);
-	printk(BIOS_SPEW, "\n");
+	printk(BIOS_DEBUG, "\n");

return pm1_sts;
 }