Change in coreboot[master]: mb/google/brya/var/kano: disable autonomous GPIO power management

[David Wu (Code Review)]

Attention is currently required from: David Wu, Nick Vaccaro.
Hello build bot (Jenkins), Tim Wawrzynczak, Nick Vaccaro,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/60388

to look at the new patch set (#2).

Change subject: mb/google/brya/var/kano: disable autonomous GPIO power management
......................................................................

mb/google/brya/var/kano: disable autonomous GPIO power management

When using cr50 FW 0.0.22/0.3.22 or earlier, its interrupt pulses
are too short to be detected when autonomous GPIO power management is enabled, therefore disable autonomous GPIO PM.

BUG=b:201266532
TEST=FW_NAME=kano emerge-brya coreboot and verify it builds
without error.

Signed-off-by: David Wu 
Change-Id: I9607af42a00c1b5f38c6e4e0effdeeaba18af5ff
---
M src/mainboard/google/brya/variants/kano/overridetree.cb
1 file changed, 11 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/88/60388/2