Change in coreboot[master]: mb/google/zork: update USB 3 controller phy Parameter for dirinboz

[Martin Roth (Code Review)]

Martin Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/50282 )

Change subject: mb/google/zork: update USB 3 controller phy Parameter for dirinboz
......................................................................

mb/google/zork: update USB 3 controller phy Parameter for dirinboz

Recommendation from SOC to config IQ=8 for U3 port0,
vboost for all U3 ports for passing ESD pin test.

BUG=b:175192931
BRANCH=zork
TEST=1. emerge-zork coreboot
     2. run U3 SI/ESD pin test => pass

Change-Id: I42a94e03fb6f8230d4356d16b8e0d2164bc61e3f
Signed-off-by: Kevin Chiu 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50282
Tested-by: build bot (Jenkins) 
Reviewed-by: Kangheui Won 
---
M src/mainboard/google/zork/variants/dirinboz/overridetree.cb
1 file changed, 21 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Kangheui Won: Looks good to me, approved

diff --git a/src/mainboard/google/zork/variants/dirinboz/overridetree.cb b/src/mainboard/google/zork/variants/dirinboz/overridetree.cb
index fc9c5fd..1bfea1d 100644
--- a/src/mainboard/google/zork/variants/dirinboz/overridetree.cb
+++ b/src/mainboard/google/zork/variants/dirinboz/overridetree.cb
@@ -60,6 +60,27 @@
    	.tx_res_tune = 0x01,
    }"

+	# USB3 phy parameter
+	register "usb3_phy_override" = "1"
+
+	# USB3 Port0 Default
+	register "usb3_phy_tune_params[0]" = "{
+		.rx_eq_delta_iq_ovrd_val = 0x8,
+		.rx_eq_delta_iq_ovrd_en = 0x1,
+	}"
+
+	# SUP_DIG_LVL_OVRD_IN Default
+	register "usb3_rx_vref_ctrl" = "0x10"
+	register "usb3_rx_vref_ctrl_en" = "0x00"
+	register "usb_3_tx_vboost_lvl" = "0x07"
+	register "usb_3_tx_vboost_lvl_en" = "0x01"
+
+	# SUPX_DIG_LVL_OVRD_IN Default
+	register "usb_3_rx_vref_ctrl_x" = "0x10"
+	register "usb_3_rx_vref_ctrl_en_x" = "0x00"
+	register "usb_3_tx_vboost_lvl_x" = "0x07"
+	register "usb_3_tx_vboost_lvl_en_x" = "0x01"
+
    # I2C2 for touchscreen and trackpad
    register "i2c[2]" = "{
    	.speed = I2C_SPEED_FAST,