Change in coreboot[master]: drivers/ipmi: Increase BMC waiting message level from DEBUG to INFO

[Paul Menzel (Code Review)]

Paul Menzel has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/41998 )

Change subject: drivers/ipmi: Increase BMC waiting message level from DEBUG to INFO
......................................................................

drivers/ipmi: Increase BMC waiting message level from DEBUG to INFO

As the booting the system can be delayed for a noticeable amount of
time, often 60 seconds is the default, this is not a debug message.
Chose log level BIOS_INFO.

Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f
Signed-off-by: Paul Menzel 
---
M src/drivers/ipmi/ipmi_kcs_ops.c
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/41998/1

diff --git a/src/drivers/ipmi/ipmi_kcs_ops.c b/src/drivers/ipmi/ipmi_kcs_ops.c
index a5a963e..edc8c18 100644
--- a/src/drivers/ipmi/ipmi_kcs_ops.c
+++ b/src/drivers/ipmi/ipmi_kcs_ops.c
@@ -88,7 +88,7 @@
    if (conf && conf->wait_for_bmc && conf->bmc_boot_timeout) {
    	struct stopwatch sw;
    	stopwatch_init_msecs_expire(&sw, conf->bmc_boot_timeout * 1000);
-		printk(BIOS_DEBUG, "IPMI: Waiting for BMC...\n");
+		printk(BIOS_INFO, "IPMI: Waiting for BMC...\n");

while (!stopwatch_expired(&sw)) {
    		if (inb(dev->path.pnp.port) != 0xff)

[Michael Niewöhner (Code Review)]

Michael Niewöhner has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/41998 )

Change subject: drivers/ipmi: Increase BMC waiting message level from DEBUG to INFO
......................................................................

Patch Set 1: Code-Review+2

[Patrick Georgi (Code Review)]

Patrick Georgi has submitted this change. ( https://review.coreboot.org/c/coreboot/+/41998 )

Change subject: drivers/ipmi: Increase BMC waiting message level from DEBUG to INFO
......................................................................

drivers/ipmi: Increase BMC waiting message level from DEBUG to INFO

As the booting the system can be delayed for a noticeable amount of
time, often 60 seconds is the default, this is not a debug message.
Chose log level BIOS_INFO.

Change-Id: I941792148820c0e1d3fbc80197125fee8cedf09f
Signed-off-by: Paul Menzel 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41998
Tested-by: build bot (Jenkins) 
Reviewed-by: Michael Niewöhner
---
M src/drivers/ipmi/ipmi_kcs_ops.c
1 file changed, 1 insertion(+), 1 deletion(-)

Approvals:
  build bot (Jenkins): Verified
  Michael Niewöhner: Looks good to me, approved

diff --git a/src/drivers/ipmi/ipmi_kcs_ops.c b/src/drivers/ipmi/ipmi_kcs_ops.c
index 0b90fb2..7fa28e3 100644
--- a/src/drivers/ipmi/ipmi_kcs_ops.c
+++ b/src/drivers/ipmi/ipmi_kcs_ops.c
@@ -88,7 +88,7 @@
    if (conf && conf->wait_for_bmc && conf->bmc_boot_timeout) {
    	struct stopwatch sw;
    	stopwatch_init_msecs_expire(&sw, conf->bmc_boot_timeout * 1000);
-		printk(BIOS_DEBUG, "IPMI: Waiting for BMC...\n");
+		printk(BIOS_INFO, "IPMI: Waiting for BMC...\n");

while (!stopwatch_expired(&sw)) {
    		if (inb(dev->path.pnp.port) != 0xff)