New patch to review for coreboot: 549f69b superio/ite/it8721f: Rewrite sio from hardcoded base addr
Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5560
-gerrit
commit 549f69b223440660415cbbda931762e2bb2da399 Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Mon Apr 21 17:10:00 2014 +1000
superio/ite/it8721f: Rewrite sio from hardcoded base addr
I'll wait for Pauls insight
Change-Id: I52211cfb833af53efd8e00fd2a634808c0a92915 Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/asus/m5a88-v/romstage.c | 2 +- src/superio/ite/it8721f/Makefile.inc | 2 +- src/superio/ite/it8721f/early_serial.c | 53 ++++++++++------------------------ src/superio/ite/it8721f/it8721f.h | 11 +++---- 4 files changed, 21 insertions(+), 47 deletions(-)
diff --git a/src/mainboard/asus/m5a88-v/romstage.c b/src/mainboard/asus/m5a88-v/romstage.c index db8b7b5..94a1e4e 100644 --- a/src/mainboard/asus/m5a88-v/romstage.c +++ b/src/mainboard/asus/m5a88-v/romstage.c @@ -41,7 +41,7 @@ #include "northbridge/amd/amdfam10/reset_test.c" #include <console/loglevel.h> #include "cpu/x86/bist.h" -#include "superio/ite/it8721f/early_serial.c" +#include <superio/ite/it8721f/it8721f.h> #include <cpu/amd/mtrr.h> #include "northbridge/amd/amdfam10/setup_resource_map.c" #include "southbridge/amd/rs780/early_setup.c" diff --git a/src/superio/ite/it8721f/Makefile.inc b/src/superio/ite/it8721f/Makefile.inc index 712d020..ef616f4 100644 --- a/src/superio/ite/it8721f/Makefile.inc +++ b/src/superio/ite/it8721f/Makefile.inc @@ -18,5 +18,5 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
+romstage-$(CONFIG_SUPERIO_ITE_IT8721F) += early_serial.c ramstage-$(CONFIG_SUPERIO_ITE_IT8721F) += superio.c - diff --git a/src/superio/ite/it8721f/early_serial.c b/src/superio/ite/it8721f/early_serial.c index 20e19b6..a820e79 100644 --- a/src/superio/ite/it8721f/early_serial.c +++ b/src/superio/ite/it8721f/early_serial.c @@ -20,30 +20,24 @@ */
#include <arch/io.h> +#include <device/pnp.h> #include "it8721f.h"
-/* The base address is 0x2e or 0x4e, depending on config bytes. */ -#define SIO_BASE 0x2e -#define SIO_INDEX SIO_BASE -#define SIO_DATA (SIO_BASE + 1) - /* Global configuration registers. */ #define IT8721F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ #define IT8721F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ #define IT8721F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ #define IT8721F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */
-static void it8721f_sio_write(u8 ldn, u8 index, u8 value) +static void it8721f_sio_write(device_t dev, u8 index, u8 value) { - outb(IT8721F_CONFIG_REG_LDN, SIO_BASE); - outb(ldn, SIO_DATA); - outb(index, SIO_BASE); - outb(value, SIO_DATA); + pnp_set_logical_device(dev); + pnp_write_config(dev, index, value); }
-static void it8721f_enter_conf(void) +static void it8721f_enter_conf(device_t dev) { - u16 port = 0x2e; /* TODO: Don't hardcode! */ + u16 port = dev >> 8;
outb(0x87, port); outb(0x01, port); @@ -54,40 +48,23 @@ static void it8721f_enter_conf(void) static void it8721f_exit_conf(void) { it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CC, 0x02); + it8721f_sio_write(dev, IT8728F_CONFIG_REG_CC, 0x02); }
/* Select 24MHz CLKIN (48MHz default). */ -void it8721f_24mhz_clkin(void) +void it8721f_24mhz_clkin(device_t dev) { - it8721f_enter_conf(); - it8721f_sio_write(0x00, IT8721F_CONFIG_REG_CLOCKSEL, 0x1); - it8721f_exit_conf(); + it8721f_reg_write(dev, IT8728F_CONFIG_REG_CLOCKSEL, 0x1); }
/* Enable the serial port(s). */ void it8721f_enable_serial(device_t dev, u16 iobase) { - /* (1) Enter the configuration state (MB PnP mode). */ - it8721f_enter_conf(); - - /* (2) Modify the data of configuration registers. */ - - /* - * Select the chip to configure (if there's more than one). - * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0. - * If this register is not written, both chips are configured. - */ - - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_CONFIGSEL, 0x00); */ - - /* Enable serial port(s). */ - it8721f_sio_write(IT8721F_SP1, 0x30, 0x1); /* Serial port 1 */ - it8721f_sio_write(IT8721F_SP2, 0x30, 0x1); /* Serial port 2 */ - - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ - /* it8718f_sio_write(0x00, IT8718F_CONFIG_REG_SWSUSP, 0x00); */ - - /* (3) Exit the configuration state (MB PnP mode). */ - it8721f_exit_conf(); + it8721f_enter_conf(dev); + pnp_set_logical_device(dev); + pnp_set_enable(dev, 0); + pnp_set_iobase(dev, PNP_IDX_IO0, iobase); + pnp_set_enable(dev, 1); + it8721f_exit_conf(dev); } diff --git a/src/superio/ite/it8721f/it8721f.h b/src/superio/ite/it8721f/it8721f.h index 25300e6..1706449 100644 --- a/src/superio/ite/it8721f/it8721f.h +++ b/src/superio/ite/it8721f/it8721f.h @@ -19,8 +19,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
-#ifndef SUPERIO_ITE_IT8721F_IT8721F_H -#define SUPERIO_ITE_IT8721F_IT8721F_H +#ifndef SUPERIO_ITE_IT8721F_H +#define SUPERIO_ITE_IT8721F_H
#define IT8721F_FDC 0x00 /* Floppy */ #define IT8721F_SP1 0x01 /* Com1 */ @@ -32,10 +32,7 @@ #define IT8721F_GPIO 0x07 /* GPIO */ #define IT8721F_IR 0x0a /* Consumer IR */
-#if defined(__PRE_RAM__) -void it8721f_24mhz_clkin(void); -void it8721f_disable_reboot(void); +void it8721f_24mhz_clkin(device_t dev); void it8721f_enable_serial(device_t dev, u16 iobase); -#endif
-#endif +#endif /* SUPERIO_ITE_IT8721F_H */
-
Edward O'Callaghan