New subject: Change in coreboot[master]: TEST-ONLY: Add anx7625 driver

26 Sep 2019

jitao shi has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/35623 )
Change subject: TEST-ONLY: add support anx7625 driver
......................................................................
TEST-ONLY: add support anx7625 driver
Change-Id: I02ef29798b0257632e0750f09a4390b3d0226367
Signed-off-by: Jitao Shi jitao.shi@mediatek.com
---
A src/drivers/analogix/anx7625/Kconfig
A src/drivers/analogix/anx7625/Makefile.inc
A src/drivers/analogix/anx7625/anx7625.c
A src/drivers/analogix/anx7625/anx7625.h
M src/mainboard/google/kukui/Kconfig
M src/mainboard/google/kukui/Makefile.inc
A src/mainboard/google/kukui/panel_anx7625.c
7 files changed, 1,423 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/23/35623/1

diff --git a/src/drivers/analogix/anx7625/Kconfig b/src/drivers/analogix/anx7625/Kconfig
new file mode 100644
index 0000000..afe0338
--- /dev/null
+++ b/src/drivers/analogix/anx7625/Kconfig
@@ -0,0 +1,20 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2019 Analogix Semiconductor.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+
+config DRIVER_ANALOGIX_ANX7625
+	bool
+	default n
+	help
+	  Analogix anx7625 MIPI DSI to eDP Converter
diff --git a/src/drivers/analogix/anx7625/Makefile.inc b/src/drivers/analogix/anx7625/Makefile.inc
new file mode 100644
index 0000000..9a46338
--- /dev/null
+++ b/src/drivers/analogix/anx7625/Makefile.inc
@@ -0,0 +1,16 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2019 Analogix Semiconductor.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+
+ramstage-$(CONFIG_DRIVER_ANALOGIX_ANX7625) += anx7625.c
diff --git a/src/drivers/analogix/anx7625/anx7625.c b/src/drivers/analogix/anx7625/anx7625.c
new file mode 100644
index 0000000..676872b
--- /dev/null
+++ b/src/drivers/analogix/anx7625/anx7625.c
@@ -0,0 +1,948 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Analogix Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <delay.h>
+#include <device/i2c_simple.h>
+#include <edid.h>
+#include <console/console.h>
+#include <timer.h>
+#include <string.h>
+
+#include "anx7625.h"
+
+/*
+ * there is a sync issue while access I2C register between AP(CPU) and
+ * internal firmware(OCM), to avoid the race condition, AP should access
+ * the reserved slave address before slave address occurs changes.
+ */
+static int i2c_access_workaround(uint8_t bus, uint8_t saddr)
+{
+	uint8_t offset;
+	static uint8_t saddr_backup = 0;
+	int ret = 0;
+
+	if (saddr != saddr_backup) {
+		saddr_backup = saddr;
+
+		if (saddr == TCPC_INTERFACE_ADDR)
+			offset = RSVD_00_ADDR;
+		else if (saddr == TX_P0_ADDR)
+			offset = RSVD_D1_ADDR;
+		else if (saddr == TX_P1_ADDR)
+			offset = RSVD_60_ADDR;
+		else if (saddr == RX_P0_ADDR)
+			offset = RSVD_39_ADDR;
+		else if (saddr == RX_P1_ADDR)
+			offset = RSVD_7F_ADDR;
+		else
+			offset = RSVD_00_ADDR;
+
+		ret = i2c_writeb(bus, saddr, offset, 0x00);
+		if (ret < 0)
+			printk(BIOS_INFO, "failed to access i2c %x\n:%x",
+					saddr, offset);
+	}
+
+	return ret;
+}
+
+static int anx7625_reg_read(uint8_t bus, uint8_t saddr,
+		uint8_t offset, uint8_t *val)
+{
+	int ret;
+
+	i2c_access_workaround(bus, saddr);
+
+	ret = i2c_readb(bus, saddr, offset, val);
+	if (ret < 0) {
+		printk(BIOS_INFO, "read i2c failed id=%x:%x\n",
+			saddr, offset);
+		return ret;
+	}
+
+	return *val;
+}
+
+static int anx7625_reg_block_read(uint8_t bus, uint8_t saddr,
+		uint8_t reg_addr, uint8_t len, uint8_t *buf)
+{
+	int ret;
+
+	i2c_access_workaround(bus, saddr);
+
+	ret = i2c_read_bytes(bus, saddr, reg_addr, buf, len);
+	if (ret < 0)
+		printk(BIOS_INFO, "read i2c block failed id=%x:%x\n",
+				saddr, reg_addr);
+
+	return ret;
+}
+
+static int anx7625_reg_write(uint8_t bus, uint8_t saddr,
+		uint8_t reg_addr, uint8_t reg_val)
+{
+	int ret;
+
+	i2c_access_workaround(bus, saddr);
+
+	ret = i2c_writeb(bus, saddr, reg_addr, reg_val);
+
+	if (ret < 0)
+		printk(BIOS_INFO, "failed to write i2c id=%x\n:%x",
+				saddr, reg_addr);
+
+	return ret;
+}
+
+static int anx7625_write_or(uint8_t bus, uint8_t saddr,
+		uint8_t offset, uint8_t mask)
+{
+	uint8_t val;
+	int ret;
+
+	ret = anx7625_reg_read(bus, saddr, offset, &val);
+
+	return (ret < 0) ? ret : anx7625_reg_write(bus, saddr,
+			offset, (val | (mask)));
+}
+
+static int anx7625_write_and(uint8_t bus, uint8_t saddr,
+		uint8_t offset, uint8_t mask)
+{
+	int ret;
+	uint8_t val;
+
+	ret = anx7625_reg_read(bus, saddr, offset, &val);
+
+	return (ret < 0) ? ret : anx7625_reg_write(bus, saddr,
+			offset, (val & (mask)));
+}
+
+static int wait_aux_op_finish(uint8_t bus)
+{
+	uint8_t val;
+	int ret;
+	int loop;
+
+	ret = -1;
+	for (loop = 0; loop < 150; loop++) {
+		mdelay(2);
+		anx7625_reg_read(bus, RX_P0_ADDR, AP_AUX_CTRL_STATUS, &val);
+		if (!(val & AP_AUX_CTRL_OP_EN)) {
+			ret = 0;
+			break;
+		}
+	}
+
+	if (ret != 0) {
+		printk(BIOS_INFO, "wait aux operation failed.\n");
+	} else {
+		ret = anx7625_reg_read(bus, RX_P0_ADDR,
+				AP_AUX_CTRL_STATUS, &val);
+		if ((ret < 0) || (val & 0x0F)) {
+			printk(BIOS_INFO, "aux status %02x\n", val);
+			ret = -1;
+		}
+	}
+
+	return ret;
+}
+
+static unsigned long gcd(unsigned long a, unsigned long b)
+{
+	unsigned long  iterations = 0L;
+
+	if (a == 0)
+		return  b;
+
+	while (b != 0) {
+		if (a > b)
+			a = a - b;
+		else
+			b = b - a;
+		iterations++;
+	}
+
+	return a;
+}
+
+/* reduction of fraction a/b */
+static void anx7625_reduction_of_a_fraction(unsigned long *a, unsigned long *b)
+{
+	unsigned long gcd_num;
+	unsigned long tmp_a, tmp_b;
+	u32 i = 1;
+
+	gcd_num = gcd(*a, *b);
+	*a /= gcd_num;
+	*b /= gcd_num;
+
+	tmp_a = *a;
+	tmp_b = *b;
+
+	while ((*a > MAX_UNSIGNED_24BIT) || (*b > MAX_UNSIGNED_24BIT)) {
+		i++;
+		*a = tmp_a / i;
+		*b = tmp_b / i;
+	}
+
+	/*
+	 * in the end, make a, b larger to have higher ODFC PLL
+	 * output frequency accuracy
+	 */
+	while ((*a < MAX_UNSIGNED_24BIT) && (*b < MAX_UNSIGNED_24BIT)) {
+		*a <<= 1;
+		*b <<= 1;
+	}
+
+	*a >>= 1;
+	*b >>= 1;
+}
+
+static int anx7625_calculate_m_n(u32 pixelclock,
+		unsigned long *m, unsigned long *n, uint8_t *post_divider)
+{
+	if (pixelclock > PLL_OUT_FREQ_ABS_MAX / POST_DIVIDER_MIN) {
+		/* pixel clock frequency is too high */
+		printk(BIOS_INFO, "pixelclock too high, act(%d), maximum(%lu)\n",
+				pixelclock,
+				PLL_OUT_FREQ_ABS_MAX / POST_DIVIDER_MIN);
+		return 1;
+	}
+
+	if (pixelclock < PLL_OUT_FREQ_ABS_MIN / POST_DIVIDER_MAX) {
+		/* pixel clock frequency is too low */
+		printk(BIOS_INFO, "pixelclock too low, act(%d), maximum(%lu)\n",
+				pixelclock,
+				PLL_OUT_FREQ_ABS_MIN / POST_DIVIDER_MAX);
+		return 1;
+	}
+
+	*post_divider = 1;
+
+	for (*post_divider = 1;
+		pixelclock < (PLL_OUT_FREQ_MIN / (*post_divider));)
+		*post_divider += 1;
+
+	if (*post_divider > POST_DIVIDER_MAX) {
+		for (*post_divider = 1;
+			(pixelclock <
+			 (PLL_OUT_FREQ_ABS_MIN / (*post_divider)));)
+			*post_divider += 1;
+
+		if (*post_divider > POST_DIVIDER_MAX) {
+			printk(BIOS_INFO, "cannot find property post_divider(%d)\n",
+					*post_divider);
+			return 1;
+		}
+	}
+
+	/* patch to improve the accuracy */
+	if (*post_divider == 7) {
+		/* 27,000,000 is not divisible by 7 */
+		*post_divider = 8;
+	} else if (*post_divider == 11) {
+		/* 27,000,000 is not divisible by 11 */
+		*post_divider = 12;
+	} else if ((*post_divider == 13) || (*post_divider == 14)) {
+		/*27,000,000 is not divisible by 13 or 14*/
+		*post_divider = 15;
+	}
+
+	if (pixelclock * (*post_divider) > PLL_OUT_FREQ_ABS_MAX) {
+		printk(BIOS_INFO, "act clock(%u) large than maximum(%lu)\n",
+				pixelclock * (*post_divider),
+				PLL_OUT_FREQ_ABS_MAX);
+		return 1;
+	}
+
+
+	*m = pixelclock * 599 / 600;
+	*n = XTAL_FRQ / (*post_divider);
+
+	anx7625_reduction_of_a_fraction(m, n);
+
+	return 0;
+}
+
+static int anx7625_odfc_config(uint8_t bus, uint8_t post_divider)
+{
+	int ret;
+
+	/* config input reference clock frequency 27MHz/19.2MHz */
+	ret = anx7625_write_and(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_16,
+			~(REF_CLK_27000kHz << MIPI_FREF_D_IND));
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_16,
+			(REF_CLK_27000kHz << MIPI_FREF_D_IND));
+	/* post divider */
+	ret |= anx7625_write_and(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_8, 0x0f);
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_8,
+			post_divider << 4);
+
+	/* add patch for MIS2-125 (5pcs ANX7625 fail ATE MBIST test) */
+	ret |= anx7625_write_and(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_7,
+			~MIPI_PLL_VCO_TUNE_REG_VAL);
+
+	/* reset ODFC PLL */
+	ret |= anx7625_write_and(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_7,
+			~MIPI_PLL_RESET_N);
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_7,
+			MIPI_PLL_RESET_N);
+
+	if (ret < 0)
+		printk(BIOS_INFO, "IO error.\n");
+
+	return ret;
+}
+
+static int anx7625_dsi_video_config(uint8_t bus, struct display_timing *dt)
+{
+	unsigned long m, n;
+	u16 htotal;
+	int ret;
+	uint8_t post_divider = 0;
+
+	ret = anx7625_calculate_m_n(dt->pixelclock * 1000,
+			&m, &n, &post_divider);
+
+	if (ret != 0) {
+		printk(BIOS_INFO, "cannot get property m n value.\n");
+		return -1;
+	}
+
+	printk(BIOS_INFO, "compute M(%lu), N(%lu), divider(%d).\n",
+			m, n, post_divider);
+
+	/* configure pixel clock */
+	ret = anx7625_reg_write(bus, RX_P0_ADDR, PIXEL_CLOCK_L,
+		(dt->pixelclock / 1000) & 0xFF);
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR, PIXEL_CLOCK_H,
+		(dt->pixelclock / 1000) >> 8);
+	/* lane count */
+	ret |= anx7625_write_and(bus, RX_P1_ADDR,
+			MIPI_LANE_CTRL_0, 0xfc);
+
+	ret |= anx7625_write_or(bus, RX_P1_ADDR,
+			MIPI_LANE_CTRL_0, 3);
+
+	/* Htotal */
+	htotal = dt->hactive + dt->hfront_porch +
+		dt->hback_porch + dt->hsync_len;
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_TOTAL_PIXELS_L, htotal & 0xFF);
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_TOTAL_PIXELS_H, htotal >> 8);
+	/* Hactive */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_ACTIVE_PIXELS_L, dt->hactive & 0xFF);
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_ACTIVE_PIXELS_H, dt->hactive >> 8);
+	/* HFP */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_FRONT_PORCH_L, dt->hfront_porch);
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_FRONT_PORCH_H,
+			dt->hfront_porch >> 8);
+	/* HWS */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_SYNC_WIDTH_L, dt->hsync_len);
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_SYNC_WIDTH_H, dt->hsync_len >> 8);
+	/* HBP */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_BACK_PORCH_L, dt->hback_porch);
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			HORIZONTAL_BACK_PORCH_H, dt->hback_porch >> 8);
+	/* Vactive */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR, ACTIVE_LINES_L,
+			dt->vactive);
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR, ACTIVE_LINES_H,
+			dt->vactive >> 8);
+	/* VFP */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			VERTICAL_FRONT_PORCH, dt->vfront_porch);
+	/* VWS */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			VERTICAL_SYNC_WIDTH, dt->vsync_len);
+	/* VBP */
+	ret |= anx7625_reg_write(bus, RX_P2_ADDR,
+			VERTICAL_BACK_PORCH, dt->vback_porch);
+	/* M value */
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_PLL_M_NUM_23_16, (m >> 16) & 0xff);
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_PLL_M_NUM_15_8, (m >> 8) & 0xff);
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_PLL_M_NUM_7_0, (m & 0xff));
+	/* N value */
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_PLL_N_NUM_23_16, (n >> 16) & 0xff);
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff);
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR, MIPI_PLL_N_NUM_7_0,
+			(n & 0xff));
+	/* diff */
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_DIGITAL_ADJ_1, 0x37);
+
+	ret |= anx7625_odfc_config(bus, post_divider - 1);
+
+	if (ret < 0)
+		printk(BIOS_INFO, "mipi dsi setup IO error.\n");
+
+	return ret;
+}
+
+static int anx7625_swap_dsi_lane3(uint8_t bus)
+{
+	int ret;
+	uint8_t val;
+
+	/* swap MIPI-DSI data lane 3 P and N */
+	ret = anx7625_reg_read(bus, RX_P1_ADDR, MIPI_SWAP, &val);
+	if (ret < 0) {
+		printk(BIOS_INFO, "IO error : access MIPI_SWAP.\n");
+		return -1;
+	}
+
+	val |= (1 << MIPI_SWAP_CH3);
+	return anx7625_reg_write(bus, RX_P1_ADDR, MIPI_SWAP, val);
+}
+
+static int anx7625_api_dsi_config(uint8_t bus, struct display_timing *dt)
+
+{
+	int val, ret;
+
+	/* swap MIPI-DSI data lane 3 P and N */
+	ret = anx7625_swap_dsi_lane3(bus);
+	if (ret < 0) {
+		printk(BIOS_INFO, "IO error : swap dsi lane 3 failed.\n");
+		return ret;
+	}
+
+	/* DSI clock settings */
+	val = (0 << MIPI_HS_PWD_CLK)		|
+		(0 << MIPI_HS_RT_CLK)		|
+		(0 << MIPI_PD_CLK)		|
+		(1 << MIPI_CLK_RT_MANUAL_PD_EN)	|
+		(1 << MIPI_CLK_HS_MANUAL_PD_EN)	|
+		(0 << MIPI_CLK_DET_DET_BYPASS)	|
+		(0 << MIPI_CLK_MISS_CTRL)	|
+		(0 << MIPI_PD_LPTX_CH_MANUAL_PD_EN);
+	ret = anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_PHY_CONTROL_3, val);
+
+	/*
+	 * Decreased HS prepare tg delay from 160ns to 80ns work with
+	 *     a) Dragon board 810 series (Qualcomm AP)
+	 *     b) Moving Pixel DSI source (PG3A pattern generator +
+	 *	P332 D-PHY Probe) default D-PHY tg
+	 *	5ns/step
+	 */
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_TIME_HS_PRPR, 0x10);
+
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_18,
+		SELECT_DSI<<MIPI_DPI_SELECT); /* enable DSI mode*/
+
+	ret |= anx7625_dsi_video_config(bus, dt);
+	if (ret < 0) {
+		printk(BIOS_INFO, "dsi video tg config failed\n");
+		return ret;
+	}
+
+	/* toggle m, n ready */
+	ret = anx7625_write_and(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_6,
+			~(MIPI_M_NUM_READY | MIPI_N_NUM_READY));
+	mdelay(1);
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, MIPI_DIGITAL_PLL_6,
+			MIPI_M_NUM_READY | MIPI_N_NUM_READY);
+
+	/* configure integer stable register */
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_VIDEO_STABLE_CNT, 0x02);
+	/* power on MIPI RX */
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_LANE_CTRL_10, 0x00);
+	ret |= anx7625_reg_write(bus, RX_P1_ADDR,
+			MIPI_LANE_CTRL_10, 0x80);
+
+	if (ret < 0)
+		printk(BIOS_INFO, "IO error : mipi dsi enable init failed.\n");
+
+	return ret;
+}
+
+static int anx7625_dsi_config(uint8_t bus, struct display_timing *dt)
+{
+	int ret;
+
+	printk(BIOS_INFO, "config dsi.\n");
+
+	/* DSC disable */
+	ret = anx7625_write_and(bus, RX_P0_ADDR,
+			R_DSC_CTRL_0, ~DSC_EN);
+
+	ret |= anx7625_api_dsi_config(bus, dt);
+
+	if (ret < 0) {
+		printk(BIOS_INFO, "IO error : api dsi config error.\n");
+	} else {
+		/* set MIPI RX EN */
+		ret = anx7625_write_or(bus, RX_P0_ADDR,
+				AP_AV_STATUS, AP_MIPI_RX_EN);
+		/* clear mute flag */
+		ret |= anx7625_write_and(bus, RX_P0_ADDR,
+				AP_AV_STATUS, ~AP_MIPI_MUTE);
+		if (ret < 0)
+			printk(BIOS_INFO, "IO error : enable mipi rx failed.\n");
+		else
+			printk(BIOS_INFO, "success to config DSI\n");
+	}
+
+	return ret;
+}
+
+static int sp_tx_rst_aux(uint8_t bus)
+{
+	int ret;
+
+	ret = anx7625_write_or(bus, TX_P2_ADDR, RST_CTRL2,
+			AUX_RST);
+	ret |= anx7625_write_and(bus, TX_P2_ADDR, RST_CTRL2,
+			~AUX_RST);
+	return ret;
+}
+
+static int sp_tx_aux_wr(uint8_t bus, uint8_t offset)
+{
+	int ret;
+
+	ret = anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_BUFF_START, offset);
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_COMMAND, 0x04);
+	ret |= anx7625_write_or(bus, RX_P0_ADDR,
+			AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+	return (ret | wait_aux_op_finish(bus));
+}
+
+static int sp_tx_aux_rd(uint8_t bus, uint8_t len_cmd)
+{
+	int ret;
+
+	ret = anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_COMMAND, len_cmd);
+	ret |= anx7625_write_or(bus, RX_P0_ADDR,
+			AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+	return (ret | wait_aux_op_finish(bus));
+}
+
+static int sp_tx_get_edid_block(uint8_t bus)
+{
+	int ret = 0;
+	uint8_t val = 0;
+
+	sp_tx_aux_wr(bus, 0x7e);
+	sp_tx_aux_rd(bus, 0x01);
+	ret = anx7625_reg_read(bus, RX_P0_ADDR, AP_AUX_BUFF_START, &val);
+	if (ret < 0) {
+		printk(BIOS_INFO, "IO error : access AUX BUFF.\n");
+		return -1;
+	}
+
+	printk(BIOS_INFO, " EDID Block = %d\n", val + 1);
+
+	if (val > 3)
+		val = 1;
+
+	return val;
+}
+
+static int edid_read(uint8_t bus,
+		uint8_t offset, uint8_t *pblock_buf)
+{
+	uint8_t c, cnt = 0;
+
+	c = 0;
+	for (cnt = 0; cnt < 3; cnt++) {
+		sp_tx_aux_wr(bus, offset);
+		/* set I2C read com 0x01 mot = 0 and read 16 bytes */
+		c = sp_tx_aux_rd(bus, 0xf1);
+
+		if (c == 1) {
+			sp_tx_rst_aux(bus);
+			printk(BIOS_INFO, "edid read failed, reset!\n");
+			cnt++;
+		} else {
+			anx7625_reg_block_read(bus, RX_P0_ADDR,
+					AP_AUX_BUFF_START,
+					MAX_DPCD_BUFFER_SIZE, pblock_buf);
+			return 0;
+		}
+	}
+
+	return 1;
+
+}
+
+static int segments_edid_read(uint8_t bus,
+		uint8_t segment, uint8_t *buf, uint8_t offset)
+{
+	uint8_t c, cnt = 0;
+	int ret;
+
+	/* write address only */
+	ret = anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_ADDR_7_0, 0x30);
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_COMMAND, 0x04);
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_CTRL_STATUS,
+			AP_AUX_CTRL_ADDRONLY | AP_AUX_CTRL_OP_EN);
+
+	ret |= wait_aux_op_finish(bus);
+	/* write segment address */
+	ret |= sp_tx_aux_wr(bus, segment);
+	/* data read */
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_ADDR_7_0, 0x50);
+	if (ret < 0) {
+		printk(BIOS_INFO, "IO error : aux initial failed.\n");
+		return ret;
+	}
+
+	for (cnt = 0; cnt < 3; cnt++) {
+		sp_tx_aux_wr(bus, offset);
+		/* set I2C read com 0x01 mot = 0 and read 16 bytes */
+		c = sp_tx_aux_rd(bus, 0xf1);
+
+		if (c == 1) {
+			ret = sp_tx_rst_aux(bus);
+			printk(BIOS_INFO, "segment read failed, reset!\n");
+			cnt++;
+		} else {
+			ret = anx7625_reg_block_read(bus, RX_P0_ADDR,
+					AP_AUX_BUFF_START,
+					MAX_DPCD_BUFFER_SIZE, buf);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int sp_tx_edid_read(uint8_t bus, uint8_t *pedid_blocks_buf)
+{
+	uint8_t offset, edid_pos;
+	int count, blocks_num;
+	uint8_t pblock_buf[MAX_DPCD_BUFFER_SIZE];
+	uint8_t i, j;
+	uint8_t g_edid_break = 0;
+	int ret;
+
+	/* address initial */
+	ret = anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_ADDR_7_0, 0x50);
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AUX_ADDR_15_8, 0);
+	ret |= anx7625_write_and(bus, RX_P0_ADDR,
+			AP_AUX_ADDR_19_16, 0xf0);
+	if (ret < 0) {
+		printk(BIOS_INFO, "access aux channel IO error.\n");
+		return -1;
+	}
+
+	blocks_num = sp_tx_get_edid_block(bus);
+	if (blocks_num < 0)
+		return blocks_num;
+
+	count = 0;
+
+	do {
+		switch (count) {
+		case 0:
+		case 1:
+			for (i = 0; i < 8; i++) {
+				offset = (i + count * 8) * MAX_DPCD_BUFFER_SIZE;
+				g_edid_break = edid_read(bus, offset,
+						pblock_buf);
+
+				if (g_edid_break == 1)
+					break;
+
+				memcpy(&pedid_blocks_buf[offset],
+						pblock_buf,
+						MAX_DPCD_BUFFER_SIZE);
+			}
+
+			break;
+		case 2:
+			offset = 0x00;
+
+			for (j = 0; j < 8; j++) {
+				edid_pos = (j + count * 8) *
+					MAX_DPCD_BUFFER_SIZE;
+
+				if (g_edid_break == 1)
+					break;
+
+				segments_edid_read(bus, count / 2,
+						pblock_buf, offset);
+				memcpy(&pedid_blocks_buf[edid_pos],
+						pblock_buf,
+						MAX_DPCD_BUFFER_SIZE);
+				offset = offset + 0x10;
+			}
+
+			break;
+		case 3:
+			offset = 0x80;
+
+			for (j = 0; j < 8; j++) {
+				edid_pos = (j + count * 8) *
+					MAX_DPCD_BUFFER_SIZE;
+				if (g_edid_break == 1)
+					break;
+
+				segments_edid_read(bus, count / 2,
+						pblock_buf, offset);
+				memcpy(&pedid_blocks_buf[edid_pos],
+						pblock_buf,
+						MAX_DPCD_BUFFER_SIZE);
+				offset = offset + 0x10;
+			}
+
+			break;
+		default:
+			break;
+		}
+
+		count++;
+
+	} while (blocks_num >= count);
+
+	/* reset aux channel */
+	sp_tx_rst_aux(bus);
+
+	return blocks_num;
+}
+
+static void anx7625_power_on(void)
+{
+#ifdef ANXGPIO
+	/* power on pin enable */
+	gpio_set_value(gpio_p_on, 1);
+	mdelay(10);
+	/* power reset pin enable */
+	gpio_set_value(gpio_reset, 1);
+	mdelay(10);
+#endif
+	printk(BIOS_INFO, "Anx7625 power on !\n");
+}
+
+static void anx7625_power_standby(void)
+{
+#ifdef ANXGPIO
+	gpio_set_value(gpio_reset, 0);
+	mdelay(1);
+	gpio_set_value(gpio_p_on, 0);
+	mdelay(1);
+#endif
+	printk(BIOS_INFO, "anx7625 power down\n");
+}
+
+static void anx7625_disable_pd_protocol(uint8_t bus)
+{
+	int ret;
+
+	/* reset main ocm */
+	ret = anx7625_reg_write(bus, RX_P0_ADDR, 0x88, 0x40);
+	/* Disable PD */
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR,
+			AP_AV_STATUS, AP_DISABLE_PD);
+	/* release main ocm */
+	ret |= anx7625_reg_write(bus, RX_P0_ADDR, 0x88, 0x00);
+
+	if (ret < 0)
+		printk(BIOS_INFO, "disable PD feature failed.\n");
+	else
+		printk(BIOS_INFO, "disable PD feature succeeded.\n");
+}
+
+#define FLASH_LOAD_STA 0x05
+#define FLASH_LOAD_STA_CHK	(1<<7)
+static void anx7625_power_on_init(uint8_t bus)
+{
+	int retry_count, i;
+	int ret = 0;
+	uint8_t val;
+
+	for (retry_count = 0; retry_count < 3; retry_count++) {
+		anx7625_power_on();
+
+		anx7625_reg_write(bus, RX_P0_ADDR, XTAL_FRQ_SEL, XTAL_FRQ_27M);
+
+		for (i = 0; i < OCM_LOADING_TIME; i++) {
+			/* check interface workable */
+			ret = anx7625_reg_read(bus, RX_P0_ADDR,
+					FLASH_LOAD_STA, &val);
+			if (ret < 0) {
+				printk(BIOS_INFO, "IO error : access flash load.\n");
+				return;
+			}
+			if ((val & FLASH_LOAD_STA_CHK) == FLASH_LOAD_STA_CHK) {
+				printk(BIOS_INFO, "interface initialization\n");
+				anx7625_disable_pd_protocol(bus);
+
+				anx7625_reg_read(bus, RX_P0_ADDR,
+						OCM_FW_VERSION, &val);
+
+				printk(BIOS_INFO, "Firmware ver %02x:", val);
+				anx7625_reg_read(bus, RX_P0_ADDR,
+						OCM_FW_REVERSION, &val);
+				printk(BIOS_INFO, "%02x\n", val);
+				return;
+			}
+			mdelay(1);
+		}
+		anx7625_power_standby();
+	}
+}
+
+static void anx7625_start_dp_work(uint8_t bus)
+{
+	int ret;
+	uint8_t val;
+
+	/* not support HDCP */
+	ret = anx7625_write_and(bus, RX_P1_ADDR, 0xee, 0x9f);
+
+	/* try auth flag */
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, 0xec, 0x10);
+	/* interrupt for DRM */
+	ret |= anx7625_write_or(bus, RX_P1_ADDR, 0xff, 0x01);
+	if (ret < 0)
+		return;
+
+	ret = anx7625_reg_read(bus, RX_P1_ADDR, 0x86, &val);
+	if (ret < 0)
+		return;
+
+	printk(BIOS_INFO, "Secure OCM version=%02x\n", val);
+}
+
+static int anx7625_hpd_change_detect(uint8_t bus)
+{
+	int ret;
+	uint8_t status;
+
+	ret = anx7625_reg_read(bus, RX_P0_ADDR,
+			SYSTEM_STSTUS, &status);
+	if (ret < 0) {
+		printk(BIOS_INFO, "IO error : clear interrupt status.\n");
+		return ret;
+	}
+
+	if (status & HPD_STATUS) {
+		anx7625_start_dp_work(bus);
+		printk(BIOS_INFO, "hpd received 0x7e:0x45=%x\n", status);
+		return 1;
+	}
+	return 0;
+}
+
+static void anx7625_parse_edid(struct edid *edid, struct display_timing *dt)
+{
+	dt->pixelclock = edid->mode.pixel_clock;
+
+	dt->hactive = edid->mode.ha;
+	dt->hsync_len = edid->mode.hspw;
+	dt->hback_porch = edid->mode.hbl - edid->mode.hso -
+		edid->mode.hborder - edid->mode.hspw;
+	dt->hfront_porch = edid->mode.hso - edid->mode.hborder;
+
+	dt->vactive = edid->mode.va;
+	dt->vsync_len = edid->mode.vspw;
+	dt->vfront_porch = edid->mode.vso - edid->mode.vborder;
+	dt->vback_porch = edid->mode.vbl - edid->mode.vso -
+		edid->mode.vspw - edid->mode.vborder;
+
+	printk(BIOS_INFO, "pixelclock(%d).\n", dt->pixelclock);
+	printk(BIOS_INFO, "hactive(%d), hsync(%d), hfp(%d), hbp(%d)\n",
+			dt->hactive,
+			dt->hsync_len,
+			dt->hfront_porch,
+			dt->hback_porch);
+	printk(BIOS_INFO, "vactive(%d), vsync(%d), vfp(%d), vbp(%d)\n",
+			dt->vactive,
+			dt->vsync_len,
+			dt->vfront_porch,
+			dt->vback_porch);
+}
+
+int anx7625_dp_start(uint8_t bus, struct edid *edid)
+{
+	int ret;
+	struct display_timing dt;
+
+	anx7625_parse_edid(edid, &dt);
+
+	ret = anx7625_dsi_config(bus, &dt);
+	if (ret < 0)
+		printk(BIOS_INFO, "MIPI phy setup error.\n");
+	else
+		printk(BIOS_INFO, "MIPI phy setup OK.\n");
+
+	return ret;
+}
+
+int anx7625_dp_get_edid(uint8_t bus, struct edid *out)
+{
+	int block_num;
+	int ret;
+	u8 edid[ONE_BLOCK_SIZE * 4];
+
+	block_num = sp_tx_edid_read(bus, edid);
+	if (block_num < 0) {
+		printk(BIOS_INFO, "Failed to get eDP EDID.\n");
+		return -1;
+	}
+
+	ret = decode_edid(edid, (block_num + 1) * ONE_BLOCK_SIZE, out);
+	if (ret != EDID_CONFORMANT) {
+		printk(BIOS_INFO, "Failed to decode EDID.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int anx7625_init(uint8_t bus)
+{
+	int cnt;
+
+	anx7625_power_on_init(bus);
+
+	for (cnt = 0; cnt < 50; cnt++) {
+		mdelay(10);
+		if (anx7625_hpd_change_detect(bus))
+			return 0;
+	}
+
+	return -1;
+}
+
diff --git a/src/drivers/analogix/anx7625/anx7625.h b/src/drivers/analogix/anx7625/anx7625.h
new file mode 100644
index 0000000..d2391a6
--- /dev/null
+++ b/src/drivers/analogix/anx7625/anx7625.h
@@ -0,0 +1,363 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ *
+ */
+
+
+#include <edid.h>
+#include <types.h>
+
+#ifndef __ANX7625_H__
+#define __ANX7625_H__
+
+#ifndef LOG_TAG
+#define LOG_TAG "anx7625dp"
+#endif
+
+#define ANX7625_DRV_VERSION "0.1.04"
+
+/* Loading OCM re-trying times */
+#define OCM_LOADING_TIME 10
+
+/*********  ANX7625 Register  **********/
+#define ANXI2CSIM
+#ifdef ANXI2CSIM
+#define TX_P0_ADDR				0x38
+#define TX_P1_ADDR				0x3D
+#define TX_P2_ADDR				0x39
+#define RX_P0_ADDR				0x3F
+#define RX_P1_ADDR				0x42
+#define RX_P2_ADDR				0x2A
+#define TCPC_INTERFACE_ADDR			0x2C
+#else
+#define TX_P0_ADDR				0x70
+#define TX_P1_ADDR				0x7A
+#define TX_P2_ADDR				0x72
+#define RX_P0_ADDR				0x7e
+#define RX_P1_ADDR				0x84
+#define RX_P2_ADDR				0x54
+#define TCPC_INTERFACE_ADDR			0x58
+#endif
+
+#define RSVD_00_ADDR				0x00
+#define RSVD_D1_ADDR				0xD1
+#define RSVD_60_ADDR				0x60
+#define RSVD_39_ADDR				0x39
+#define RSVD_7F_ADDR				0x7F
+
+/* anx7625 clock frequency in Hz */
+#define XTAL_FRQ        (27*1000000)
+
+#define  POST_DIVIDER_MIN	1
+#define  POST_DIVIDER_MAX	16
+#define  PLL_OUT_FREQ_MIN	520000000UL
+#define  PLL_OUT_FREQ_MAX	730000000UL
+#define  PLL_OUT_FREQ_ABS_MIN	300000000UL
+#define  PLL_OUT_FREQ_ABS_MAX	800000000UL
+#define  MAX_UNSIGNED_24BIT	16777215UL
+
+/***************************************************************/
+/* Register definition of device address 0x58 */
+
+#define PRODUCT_ID_L 0x02
+#define PRODUCT_ID_H 0x03
+
+#define INTR_ALERT_1  0xCC
+#define INTR_SOFTWARE_INT (1<<3)
+#define INTR_RECEIVED_MSG (1<<5)
+
+#define SYSTEM_STSTUS 0x45
+#define INTERFACE_CHANGE_INT 0x44
+#define HPD_STATUS_CHANGE 0x80
+#define HPD_STATUS 0x80
+
+/******** END of I2C Address 0x58 ********/
+
+/***************************************************************/
+/* Register definition of device address 0x70 */
+#define  I2C_ADDR_70_DPTX              0x70
+
+#define SP_TX_LINK_BW_SET_REG 0xA0
+#define SP_TX_LANE_COUNT_SET_REG 0xA1
+
+#define M_VID_0 0xC0
+#define M_VID_1 0xC1
+#define M_VID_2 0xC2
+#define N_VID_0 0xC3
+#define N_VID_1 0xC4
+#define N_VID_2 0xC5
+
+/***************************************************************/
+/* Register definition of device address 0x72 */
+#define AUX_RST	0x04
+#define RST_CTRL2 0x07
+
+#define SP_TX_TOTAL_LINE_STA_L 0x24
+#define SP_TX_TOTAL_LINE_STA_H 0x25
+#define SP_TX_ACT_LINE_STA_L 0x26
+#define SP_TX_ACT_LINE_STA_H 0x27
+#define SP_TX_V_F_PORCH_STA 0x28
+#define SP_TX_V_SYNC_STA 0x29
+#define SP_TX_V_B_PORCH_STA 0x2A
+#define SP_TX_TOTAL_PIXEL_STA_L 0x2B
+#define SP_TX_TOTAL_PIXEL_STA_H 0x2C
+#define SP_TX_ACT_PIXEL_STA_L 0x2D
+#define SP_TX_ACT_PIXEL_STA_H 0x2E
+#define SP_TX_H_F_PORCH_STA_L 0x2F
+#define SP_TX_H_F_PORCH_STA_H 0x30
+#define SP_TX_H_SYNC_STA_L 0x31
+#define SP_TX_H_SYNC_STA_H 0x32
+#define SP_TX_H_B_PORCH_STA_L 0x33
+#define SP_TX_H_B_PORCH_STA_H 0x34
+
+#define SP_TX_VID_CTRL 0x84
+#define SP_TX_BPC_MASK 0xE0
+#define SP_TX_BPC_6    0x00
+#define SP_TX_BPC_8    0x20
+#define SP_TX_BPC_10   0x40
+#define SP_TX_BPC_12   0x60
+
+#define VIDEO_BIT_MATRIX_12 0x4c
+
+#define AUDIO_CHANNEL_STATUS_1 0xd0
+#define AUDIO_CHANNEL_STATUS_2 0xd1
+#define AUDIO_CHANNEL_STATUS_3 0xd2
+#define AUDIO_CHANNEL_STATUS_4 0xd3
+#define AUDIO_CHANNEL_STATUS_5 0xd4
+#define AUDIO_CHANNEL_STATUS_6 0xd5
+#define TDM_SLAVE_MODE 0x10
+#define I2S_SLAVE_MODE 0x08
+
+#define AUDIO_CONTROL_REGISTER 0xe6
+#define TDM_TIMING_MODE 0x08
+
+#define  I2C_ADDR_72_DPTX              0x72
+
+#define  VIDEO_CONTROL_0  0x08
+
+#define  ACTIVE_LINES_L         0x14
+#define  ACTIVE_LINES_H         0x15  /* note: bit[7:6] are reserved */
+#define  VERTICAL_FRONT_PORCH   0x16
+#define  VERTICAL_SYNC_WIDTH    0x17
+#define  VERTICAL_BACK_PORCH    0x18
+
+#define  HORIZONTAL_TOTAL_PIXELS_L    0x19
+#define  HORIZONTAL_TOTAL_PIXELS_H    0x1A  /* note: bit[7:6] are reserved */
+#define  HORIZONTAL_ACTIVE_PIXELS_L   0x1B
+#define  HORIZONTAL_ACTIVE_PIXELS_H   0x1C  /* note: bit[7:6] are reserved */
+#define  HORIZONTAL_FRONT_PORCH_L     0x1D
+#define  HORIZONTAL_FRONT_PORCH_H     0x1E  /* note: bit[7:4] are reserved */
+#define  HORIZONTAL_SYNC_WIDTH_L      0x1F
+#define  HORIZONTAL_SYNC_WIDTH_H      0x20  /* note: bit[7:4] are reserved */
+#define  HORIZONTAL_BACK_PORCH_L      0x21
+#define  HORIZONTAL_BACK_PORCH_H      0x22  /* note: bit[7:4] are reserved */
+
+/******** END of I2C Address 0x72 *********/
+/***************************************************************/
+/* Register definition of device address 0x7e */
+
+#define  I2C_ADDR_7E_FLASH_CONTROLLER  0x7E
+
+#define  XTAL_FRQ_SEL    0x3F
+/* bit field positions */
+#define  XTAL_FRQ_SEL_POS    5
+/* bit field values */
+#define  XTAL_FRQ_19M2   (0 << XTAL_FRQ_SEL_POS)
+#define  XTAL_FRQ_27M    (4 << XTAL_FRQ_SEL_POS)
+
+#define  R_DSC_CTRL_0    0x40
+#define  READ_STATUS_EN  7
+#define  CLK_1MEG_RB     6  /* 1MHz clock reset; 0=reset, 0=reset release */
+#define  DSC_BIST_DONE   1  /* bit[5:1]: 1=DSC MBIST pass */
+#define  DSC_EN          0x01  /* 1=DSC enabled, 0=DSC disabled */
+
+#define OCM_FW_VERSION   0x31
+#define OCM_FW_REVERSION 0x32
+
+#define AP_AUX_ADDR_7_0   0x11
+#define AP_AUX_ADDR_15_8  0x12
+#define AP_AUX_ADDR_19_16 0x13
+
+/* note: bit[0:3] AUX status, bit 4 op_en, bit 5 address only */
+#define AP_AUX_CTRL_STATUS 0x14
+#define AP_AUX_CTRL_OP_EN 0x10
+#define AP_AUX_CTRL_ADDRONLY 0x20
+
+#define AP_AUX_BUFF_START 0x15
+#define PIXEL_CLOCK_L 0x25
+#define PIXEL_CLOCK_H 0x26
+
+#define AP_AUX_COMMAND 0x27  /* com+len */
+/* bit 0&1: 3D video structure */
+/* 0x01: frame packing,  0x02:Line alternative, 0x03:Side-by-side(full) */
+#define AP_AV_STATUS 0x28
+#define AP_VIDEO_CHG (1<<2)
+#define AP_AUDIO_CHG (1<<3)
+#define AP_MIPI_MUTE (1<<4) /* 1:MIPI input mute, 0: ummute */
+#define AP_MIPI_RX_EN (1<<5) /* 1: MIPI RX input in  0: no RX in */
+#define AP_DISABLE_PD (1<<6)
+#define AP_DISABLE_DISPLAY (1<<7)
+/***************************************************************/
+/* Register definition of device address 0x84 */
+#define  MIPI_PHY_CONTROL_3            0x03
+#define  MIPI_HS_PWD_CLK               7
+#define  MIPI_HS_RT_CLK                6
+#define  MIPI_PD_CLK                   5
+#define  MIPI_CLK_RT_MANUAL_PD_EN      4
+#define  MIPI_CLK_HS_MANUAL_PD_EN      3
+#define  MIPI_CLK_DET_DET_BYPASS       2
+#define  MIPI_CLK_MISS_CTRL            1
+#define  MIPI_PD_LPTX_CH_MANUAL_PD_EN  0
+
+#define  MIPI_LANE_CTRL_0		0x05
+#define  MIPI_TIME_HS_PRPR		0x08
+
+/* After MIPI RX protocol layer received this many video frames, */
+/* protocol layer starts to reconstruct video stream from PHY */
+#define  MIPI_VIDEO_STABLE_CNT           0x0A
+
+#define  MIPI_LANE_CTRL_10               0x0F
+#define  MIPI_DIGITAL_ADJ_1   0x1B
+
+#define  MIPI_PLL_M_NUM_23_16   0x1E
+#define  MIPI_PLL_M_NUM_15_8    0x1F
+#define  MIPI_PLL_M_NUM_7_0     0x20
+#define  MIPI_PLL_N_NUM_23_16   0x21
+#define  MIPI_PLL_N_NUM_15_8    0x22
+#define  MIPI_PLL_N_NUM_7_0     0x23
+
+#define  MIPI_DIGITAL_PLL_6     0x2A
+/* bit[7:6]: VCO band control, only effective */
+/* when MIPI_PLL_FORCE_BAND_EN (0x84:0x2B[6]) is 1 */
+#define  MIPI_M_NUM_READY        0x10
+#define  MIPI_N_NUM_READY        0x08
+#define  STABLE_INTEGER_CNT_EN   0x04
+#define  MIPI_PLL_TEST_BIT       0
+/* bit[1:0]: test point output select - */
+/* 00: VCO power, 01: dvdd_pdt, 10: dvdd, 11: vcox */
+
+#define  MIPI_DIGITAL_PLL_7      0x2B
+#define  MIPI_PLL_FORCE_N_EN     7
+#define  MIPI_PLL_FORCE_BAND_EN  6
+
+#define  MIPI_PLL_VCO_TUNE_REG   4
+/* bit[5:4]: VCO metal capacitance - */
+/* 00: +20% fast, 01: +10% fast (default), 10: typical, 11: -10% slow */
+#define  MIPI_PLL_VCO_TUNE_REG_VAL   0x30
+
+#define  MIPI_PLL_PLL_LDO_BIT    2
+/* bit[3:2]: vco_v2i power - */
+/* 00: 1.40V, 01: 1.45V (default), 10: 1.50V, 11: 1.55V */
+#define  MIPI_PLL_RESET_N        0x02
+#define  MIPI_FRQ_FORCE_NDET     0
+
+#define  MIPI_ALERT_CLR_0        0x2D
+#define  HS_link_error_clear     7
+/* This bit itself is S/C, and it clears 0x84:0x31[7] */
+
+#define  MIPI_ALERT_OUT_0        0x31
+#define  check_sum_err_hs_sync   7
+/* This bit is cleared by 0x84:0x2D[7] */
+
+#define  MIPI_DIGITAL_PLL_8    0x33
+#define  MIPI_POST_DIV_VAL     4
+/* n means divided by (n+1), n = 0~15 */
+#define  MIPI_EN_LOCK_FRZ      3
+#define  MIPI_FRQ_COUNTER_RST  2
+#define  MIPI_FRQ_SET_REG_8    1
+/* bit 0 is reserved */
+
+#define  MIPI_DIGITAL_PLL_9    0x34
+
+#define  MIPI_DIGITAL_PLL_16   0x3B
+#define  MIPI_FRQ_FREEZE_NDET          7
+#define  MIPI_FRQ_REG_SET_ENABLE       6
+#define  MIPI_REG_FORCE_SEL_EN         5
+#define  MIPI_REG_SEL_DIV_REG          4
+#define  MIPI_REG_FORCE_PRE_DIV_EN     3
+/* bit 2 is reserved */
+#define  MIPI_FREF_D_IND               1
+#define  REF_CLK_27000kHz    1
+#define  REF_CLK_19200kHz    0
+#define  MIPI_REG_PLL_PLL_TEST_ENABLE  0
+
+#define  MIPI_DIGITAL_PLL_18  0x3D
+#define  FRQ_COUNT_RB_SEL       7
+#define  REG_FORCE_POST_DIV_EN  6
+#define  MIPI_DPI_SELECT        5
+#define  SELECT_DSI  1
+#define  SELECT_DPI  0
+#define  REG_BAUD_DIV_RATIO     0
+
+#define  H_BLANK_L            0x3E
+/* for DSC only */
+#define  H_BLANK_H            0x3F
+/* for DSC only; note: bit[7:6] are reserved */
+#define  MIPI_SWAP  0x4A
+#define  MIPI_SWAP_CH0    7
+#define  MIPI_SWAP_CH1    6
+#define  MIPI_SWAP_CH2    5
+#define  MIPI_SWAP_CH3    4
+#define  MIPI_SWAP_CLK    3
+/* bit[2:0] are reserved */
+
+/******** END of I2C Address 0x84 *********/
+
+/* DPCD regs */
+#define DPCD_DPCD_REV                  0x00
+#define DPCD_MAX_LINK_RATE             0x01
+#define DPCD_MAX_LANE_COUNT            0x02
+
+/*********  ANX7625 Register End  **********/
+
+/*****************  Display *****************/
+enum AudioFs {
+	AUDIO_FS_441K  = 0x00,
+	AUDIO_FS_48K   = 0x02,
+	AUDIO_FS_32K   = 0x03,
+	AUDIO_FS_882K  = 0x08,
+	AUDIO_FS_96K   = 0x0a,
+	AUDIO_FS_1764K = 0x0c,
+	AUDIO_FS_192K  = 0x0e
+};
+
+enum AudioWdLen {
+	AUDIO_W_LEN_16_20MAX = 0x02,
+	AUDIO_W_LEN_18_20MAX = 0x04,
+	AUDIO_W_LEN_17_20MAX = 0x0c,
+	AUDIO_W_LEN_19_20MAX = 0x08,
+	AUDIO_W_LEN_20_20MAX = 0x0a,
+	AUDIO_W_LEN_20_24MAX = 0x03,
+	AUDIO_W_LEN_22_24MAX = 0x05,
+	AUDIO_W_LEN_21_24MAX = 0x0d,
+	AUDIO_W_LEN_23_24MAX = 0x09,
+	AUDIO_W_LEN_24_24MAX = 0x0b
+};
+
+#define I2S_CH_2	0x01
+#define TDM_CH_4	0x03
+#define TDM_CH_6	0x05
+#define TDM_CH_8	0x07
+
+#define MAX_DPCD_BUFFER_SIZE	16
+
+#define ONE_BLOCK_SIZE      128
+#define FOUR_BLOCK_SIZE     (128*4)
+
+struct display_timing {
+	unsigned int pixelclock;
+	unsigned int hactive;
+	unsigned int hfront_porch;
+	unsigned int hback_porch;
+	unsigned int hsync_len;
+	unsigned int vactive;
+	unsigned int vfront_porch;
+	unsigned int vback_porch;
+	unsigned int vsync_len;
+};
+
+int anx7625_dp_start(uint8_t bus, struct edid *edid);
+int anx7625_dp_get_edid(uint8_t bus, struct edid *out);
+int anx7625_init(uint8_t bus);
+#endif  /* __ANX7625_H__ */
diff --git a/src/mainboard/google/kukui/Kconfig b/src/mainboard/google/kukui/Kconfig
index 2828918..bab96ad 100644
--- a/src/mainboard/google/kukui/Kconfig
+++ b/src/mainboard/google/kukui/Kconfig
@@ -42,7 +42,7 @@
    select MAINBOARD_HAS_NATIVE_VGA_INIT
    select MAINBOARD_FORCE_NATIVE_VGA_INIT
    select HAVE_LINEAR_FRAMEBUFFER
-	select DRIVER_PARADE_PS8640 if BOARD_GOOGLE_JACUZZI
+	select DRIVER_ANALOGIX_ANX7625 if BOARD_GOOGLE_JACUZZI
    select MT8183_DRAM_EMCP if BOARD_GOOGLE_KRANE
config MAINBOARD_DIR
diff --git a/src/mainboard/google/kukui/Makefile.inc b/src/mainboard/google/kukui/Makefile.inc
index 2e8a79a..7839422 100644
--- a/src/mainboard/google/kukui/Makefile.inc
+++ b/src/mainboard/google/kukui/Makefile.inc
@@ -30,4 +30,6 @@
 ramstage-$(CONFIG_BOARD_GOOGLE_KRANE) += panel_krane.c
 ramstage-$(CONFIG_BOARD_GOOGLE_KUKUI) += panel_kukui.c
 ramstage-$(CONFIG_DRIVER_PARADE_PS8640) += panel_ps8640.c
+ramstage-$(CONFIG_DRIVER_ANALOGIX_ANX7625) += panel_anx7625.c
+
 ramstage-y += reset.c
diff --git a/src/mainboard/google/kukui/panel_anx7625.c b/src/mainboard/google/kukui/panel_anx7625.c
new file mode 100644
index 0000000..10cbf5c
--- /dev/null
+++ b/src/mainboard/google/kukui/panel_anx7625.c
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2019 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <delay.h>
+#include <drivers/analogix/anx7625/anx7625.h>
+#include <edid.h>
+#include <gpio.h>
+#include <soc/i2c.h>
+#include <string.h>
+
+#include "panel.h"
+
+
+static void power_on_anx7625(void)
+{
+	gpio_output(GPIO_MIPIBRDG_RST_L_1V8, 0);
+	gpio_output(GPIO_PP1200_MIPIBRDG_EN, 1);    //1.0
+	gpio_output(GPIO_VDDIO_MIPIBRDG_EN, 1);    //3.3
+	gpio_output(GPIO_PP1800_LCM_EN, 1);    //1.8
+	mdelay(2);
+	gpio_output(GPIO_MIPIBRDG_PWRDN_L_1V8, 1);
+	mdelay(10);
+	gpio_output(GPIO_MIPIBRDG_RST_L_1V8, 1);
+	gpio_output(GPIO_PP3300_LCM_EN, 1);
+}
+
+static void dummy_power_on(void)
+{
+	/* The panel has been already powered on when getting panel information
+	 * so we should do nothing here.
+	 */
+}
+
+static struct panel_serializable_data anx7625_data = {
+	.orientation = LB_FB_ORIENTATION_NORMAL,
+	.init = { INIT_END_CMD },
+};
+
+static struct panel_description anx7625_panel = {
+	.s = &anx7625_data,
+	.power_on = dummy_power_on,
+};
+
+struct panel_description *get_panel_description(int panel_id)
+{
+	/* To read panel EDID, we have to first power on anx7625. */
+	power_on_anx7625();
+
+	u8 i2c_bus = 4;
+	mtk_i2c_bus_init(i2c_bus);
+
+	anx7625_init(i2c_bus);
+	struct edid *edid = &anx7625_data.edid;
+	if (anx7625_dp_get_edid(i2c_bus, edid)) {
+		printk(BIOS_ERR, "Can't get panel's edid\n");
+		return NULL;
+	}
+	anx7625_dp_start(i2c_bus, edid);
+	return &anx7625_panel;
+}
-- 
To view, visit https://review.coreboot.org/c/coreboot/+/35623
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: I02ef29798b0257632e0750f09a4390b3d0226367
Gerrit-Change-Number: 35623
Gerrit-PatchSet: 1
Gerrit-Owner: jitao shi jitao.shi@mediatek.com
Gerrit-MessageType: newchange



    

Change in coreboot[master]: TEST-ONLY: add support anx7625 driver