Change in coreboot[master]: mb/google/volteer/var/volet: Update gpio and devicetree settings
Sheng-Liang Pan has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/55113 )
Change subject: mb/google/volteer/var/volet: Update gpio and devicetree settings ......................................................................
mb/google/volteer/var/volet: Update gpio and devicetree settings
Based on schematic and gpio table of volet, update gpio and devicetree settings for volet Proto.
BUG=b:186334008 TEST=FW_NAME=volet emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Sheng-Liang Pan sheng-liang.pan@quanta.corp-partner.google.com Change-Id: Ia0e9557e01ce1e7a49a3dddf6da3e4a29587a8b7 --- M src/mainboard/google/volteer/variants/volet/Makefile.inc A src/mainboard/google/volteer/variants/volet/gpio.c M src/mainboard/google/volteer/variants/volet/overridetree.cb 3 files changed, 513 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/13/55113/1
diff --git a/src/mainboard/google/volteer/variants/volet/Makefile.inc b/src/mainboard/google/volteer/variants/volet/Makefile.inc index 9064208..3488dc6 100644 --- a/src/mainboard/google/volteer/variants/volet/Makefile.inc +++ b/src/mainboard/google/volteer/variants/volet/Makefile.inc @@ -1,3 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only
+bootblock-y += gpio.c + romstage-y += memory.c + +ramstage-y += gpio.c +ramstage-y += ramstage.c diff --git a/src/mainboard/google/volteer/variants/volet/gpio.c b/src/mainboard/google/volteer/variants/volet/gpio.c new file mode 100644 index 0000000..4ec02c5 --- /dev/null +++ b/src/mainboard/google/volteer/variants/volet/gpio.c @@ -0,0 +1,294 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A7 : I2S2_SCLK ==> EN_PP3300_TRACKPAD */ + PAD_CFG_GPO(GPP_A7, 1, DEEP), + /* A8 : I2S2_SFRM ==> EN_PP3300_TOUCHSCREEN */ + PAD_CFG_GPO(GPP_A8, 1, DEEP), + /* A10 : I2S2_RXD ==> EN_SPKR_PA */ + PAD_CFG_GPO(GPP_A10, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */ + PAD_CFG_GPO(GPP_A13, 1, DEEP), + /* A16 : USB_OC3# ==> USB_C0_OC_ODL */ + PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), + /* A18 : DDSP_HPDB ==> HDMI_HPD */ + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + /* A22 : DDPC_CTRLDATA ==> EN_HDMI_PWR */ + PAD_CFG_GPO(GPP_A22, 1, DEEP), + /* A23 : I2S1_SCLK ==> I2S1_SPKR_SCLK */ + PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1), + + /* B2 : VRALERT# ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_B2, 1, DEEP), + /* B3 : CPU_GP2 ==> PEN_DET_ODL */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_B3, NONE, PLTRST), + /* B5 : ISH_I2C0_CVF_SDA */ + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + /* B6 : ISH_I2C0_CVF_SCL */ + PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1), + /* B7 : ISH_12C1_SDA ==> ISH_I2C0_SENSOR_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1), + /* B8 : ISH_I2C1_SCL ==> ISH_I2C0_SENSOR_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1), + /* B9 : I2C5_SDA ==> PCH_I2C5_TRACKPAD_SDA */ + PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1), + /* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */ + PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), + /* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */ + PAD_CFG_NF(GPP_B18, DN_20K, DEEP, NF1), + /* B19 : GSPI1_CS0# ==> PCH_GSPI1_FPMCU_CS_L */ + PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1), + /* B20 : GSPI1_CLK ==> PCH_GSPI1_FPMCU_CLK */ + PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1), + /* B21 : GSPI1_MISO ==> PCH_GSPI1_FPMCU_MISO */ + PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1), + /* B23 : SML1ALERT# ==> GPP_B23_STRAP # */ + PAD_NC(GPP_B23, DN_20K), + + /* C0 : SMBCLK ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_C0, 1, DEEP), + /* C2 : SMBALERT# ==> GPP_C2_STRAP */ + PAD_NC(GPP_C2, DN_20K), + /* C3 : SML0CLK ==> USB4_SMB_SCL */ + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + /* C4 : SML0DATA ==> USB4_SMB_SDA */ + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + /* C5 : SML0ALERT# ==> GPP_C5_BOOT_STRAP0 */ + PAD_NC(GPP_C5, DN_20K), + /* C7 : SML1DATA ==> EN_PP5000_PEN */ + PAD_CFG_GPO(GPP_C7, 1, DEEP), + /* C10 : UART0_RTS# ==> USI_RST_L */ + PAD_CFG_GPO(GPP_C10, 1, DEEP), + /* C13 : UART1_TXD ==> EN_PP5000_TRACKPAD */ + PAD_CFG_GPO(GPP_C13, 1, DEEP), + /* C16 : I2C0_SDA ==> PCH_I2C0_1V8_AUDIO_SDA */ + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + /* C17 : I2C0_SCL ==> PCH_I2C0_1V8_AUDIO_SCL */ + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + /* C18 : I2C1_SDA ==> PCH_I2C1_TOUCH_USI_SDA */ + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + /* C19 : I2C1_SCL ==> PCH_I2C1_TOUCH_USI_SCL */ + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + /* C20 : UART2_RXD ==> FPMCU_INT_L */ + PAD_CFG_GPI_INT(GPP_C20, NONE, PLTRST, LEVEL), + /* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */ + PAD_CFG_GPO(GPP_C22, 0, DEEP), + + /* D0 : ISH_GP0 ==> ISH_IMU_INT_L */ + PAD_CFG_GPI(GPP_D0, NONE, DEEP), + /* D1 : ISH_GP1 ==> ISH_ACCEL_INT_L */ + PAD_CFG_GPI(GPP_D1, NONE, DEEP), + /* D2 : ISH_GP2 ==> ISH_LID_OPEN */ + PAD_CFG_GPI(GPP_D2, NONE, DEEP), + /* D3 : ISH_GP3 ==> ISH_ALS_RGB_INT_L */ + PAD_CFG_GPI(GPP_D3, NONE, DEEP), + /* D4 : IMGCLKOUT0 ==> FCAM_RST_L */ + PAD_CFG_GPO(GPP_D4, 0, PLTRST), + /* D6 : SRCCLKREQ1# ==> WLAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + /* D7 : SRCCLKREQ2# ==> WWAN_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), + /* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + /* D9 : ISH_SPI_CS# ==> PCH_GSPI2_CVF_CS_L */ + PAD_CFG_NF(GPP_D9, NONE, DEEP, NF7), + /* D10 : ISH_SPI_CLK ==> PCH_GSPI2_CVF_CLK_STRAP */ + PAD_CFG_NF(GPP_D10, DN_20K, DEEP, NF7), + /* D11 : ISH_SPI_MISO ==> PCH_GSPI2_CVF_MISO */ + PAD_CFG_NF(GPP_D11, NONE, DEEP, NF7), + /* D12 : ISH_SPI_MOSI ==> PCH_GSPI2_CVF_MISO_STRAP */ + PAD_CFG_NF(GPP_D12, DN_20K, DEEP, NF7), + /* D13 : ISH_UART0_RXD ==> UART_ISH_RX_DEBUG_TX */ + PAD_CFG_NF(GPP_D13, NONE, DEEP, NF1), + /* D14 : ISH_UART0_TXD ==> UART_ISH_TX_DEBUG_RX */ + PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1), + /* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */ + PAD_CFG_GPO(GPP_D16, 1, DEEP), + /* D17 : ISH_GP4 ==> EN_FCAM_PWR */ + PAD_CFG_GPO(GPP_D17, 1, DEEP), + + /* E1 : SPI1_IO2 ==> PEN_DET_ODL */ + PAD_CFG_GPI_SCI(GPP_E1, NONE, DEEP, EDGE_SINGLE, NONE), + /* E2 : SPI1_IO3 ==> WLAN_PCIE_WAKE_ODL */ + PAD_CFG_GPI(GPP_E2, NONE, DEEP), + /* E3 : CPU_GP0 ==> USI_REPORT_EN */ + PAD_CFG_GPO(GPP_E3, 1, DEEP), + /* E7 : CPU_GP1 ==> USI_INT */ + PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE), + /* E8 : SPI1_CS1# ==> SLP_S0IX */ + PAD_CFG_GPO(GPP_E8, 0, DEEP), + /* E11 : SPI1_CLK ==> SD_PE_WAKE_ODL */ + PAD_CFG_GPI(GPP_E11, NONE, DEEP), + /* E12 : SPI1_MISO_IO1 ==> PEN_OC_ODL */ + PAD_CFG_GPI(GPP_E12, NONE, DEEP), + /* E15 : ISH_GP6 ==> TRACKPAD_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_E15, NONE, PLTRST, LEVEL, INVERT), + /* E16 : ISH_GP7 ==> WWAN_SIM1_DET_OD */ + PAD_CFG_GPI(GPP_E16, NONE, DEEP), + /* E17 : THC0_SPI1_INT# ==> WWAN_PERST_L */ + PAD_CFG_GPO(GPP_E17, 1, DEEP), + /* E19 : DDP1_CTRLDATA ==> USB0_C0_LSX_SOC_RX_STRAP */ + PAD_CFG_NF(GPP_E19, DN_20K, DEEP, NF4), + + /* F6 : CNV_PA_BLANKING ==> WWAN_WLAN_COEX3 */ + PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1), + /* F7 : GPPF7_STRAP */ + PAD_NC(GPP_F7, DN_20K), + /* F8 : I2S_MCLK2_INOUT ==> HP_INT_L */ + PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, EDGE_BOTH), + /* F11 : THC1_SPI2_CLK ==> EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_F11, 1, DEEP), + /* F12 : GSXDOUT ==> WWAN_RST_ODL */ + PAD_CFG_GPI(GPP_F12, NONE, DEEP), + /* F13 : GSXDOUT ==> WiFi_DISABLE_L */ + PAD_CFG_GPO(GPP_F13, 1, DEEP), + /* F14 : GSXDIN ==> SAR0_INT_L */ + PAD_CFG_GPI_SCI_LOW(GPP_F14, NONE, PLTRST, EDGE_SINGLE), + /* F16 : GSXCLK ==> WWAN_DPR_SAR_ODL */ + PAD_CFG_GPO(GPP_F16, 1, DEEP), + /* F17 : WWAN_RF_DISABLE_ODL */ + PAD_CFG_GPO(GPP_F17, 1, DEEP), + /* F18 : THC1_SPI2_INT# ==> WWAN_PCIE_WAKE_ODL */ + PAD_CFG_GPI_SCI_LOW(GPP_F18, NONE, DEEP, EDGE_SINGLE), + /* F19 : SRCCLKREQ6# ==> WLAN_INT_L */ + PAD_CFG_GPI_SCI_LOW(GPP_F19, NONE, DEEP, EDGE_SINGLE), + + /* H0 : GPPH0_BOOT_STRAP1 */ + PAD_NC(GPP_H0, DN_20K), + /* H1 : GPPH1_BOOT_STRAP2 */ + PAD_NC(GPP_H1, DN_20K), + /* H2 : GPPH2_BOOT_STRAP3 */ + PAD_NC(GPP_H2, DN_20K), + /* H3 : SX_EXIT_HOLDOFF# ==> SD_PERST_L */ + PAD_CFG_GPO(GPP_H3, 1, DEEP), + /* H6 : I2C3_SDA ==> PCH_I2C3_CAM_SAR1_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C3_SCL ==> PCH_I2C3_CAM_SAR1_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H8 : I2C4_SDA ==> WWAN_WLAN_COEX1 */ + PAD_CFG_NF(GPP_H8, NONE, DEEP, NF2), + /* H9 : I2C4_SCL ==> WWAN_WLAN_COEX2 */ + PAD_CFG_NF(GPP_H9, NONE, DEEP, NF2), + /* H12 : M2_SKT2_CFG0 ==> WWAN_CONFIG0 */ + PAD_CFG_GPI(GPP_H12, NONE, DEEP), + /* H13 : M2_SKT2_CFG1 # ==> SPKR_INT_L */ + PAD_CFG_GPI(GPP_H13, NONE, DEEP), + /* H15 : M2_SKT2_CFG3 # ==> WWAN_CONFIG3 */ + PAD_CFG_GPI(GPP_H15, NONE, DEEP), + /* H16 : DDPB_CTRLCLK ==> DDPB_HDMI_CTRLCLK */ + PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1), + /* H17 : DDPB_CTRLDATA ==> DDPB_HDMI_CTRLDATA */ + PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), + /* H19 : TIME_SYNC0 ==> USER_PRES_FP_ODL_R */ + PAD_CFG_GPI(GPP_H19, NONE, DEEP), + /* H20 : IMGCLKOUT1 ==> EN_MIPI_RCAM_PWR */ + PAD_CFG_GPO(GPP_H20, 0, DEEP), + /* H21 : IMGCLKOUT2 ==> CAM_MCLK1 */ + PAD_CFG_NF(GPP_H21, NONE, DEEP, NF1), + /* H22 : IMGCLKOUT3 ==> CAM_MCLK0 */ + PAD_CFG_NF(GPP_H22, NONE, DEEP, NF1), + + /* R0 : HDA_BCLK ==> I2S0_HP_SCLK */ + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), + /* R1 : HDA_SYNC ==> I2S0_HP_SFRM */ + PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), + /* R2 : HDA_SDO ==> I2S0_PCH_TX_HP_RX_STRAP */ + PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), + /* R3 : HDA_SDIO ==> I2S0_PCH_RX_HP_TX */ + PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), + /* R5 : HDA_SDI1 ==> I2S1_PCH_RX_SPKR_TX */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2), + /* R6 : I2S1_TXD ==> I2S1_PCH_RX_SPKR_RX */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2), + /* R7 : I2S1_SFRM ==> I2S1_SPKR_SFRM */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2), + + /* S0 : SNDW0_CLK ==> SNDW0_HP_CLK */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1), + /* S1 : SNDW0_DATA ==> SNDW0_HP_DATA */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1), + /* S2 : SNDW1_CLK ==> SNDW1_SPKR_CLK */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF1), + /* S3 : SNDW1_DATA ==> SNDW1_SPKR_DATA */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF1), + /* S6 : SNDW3_CLK ==> DMIC_CLK0 */ + PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2), + /* S7 : SNDW3_DATA ==> DMIC_DATA0 */ + PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2), + + /* GPD9: SLP_WLAN# ==> SLP_WLAN_L */ + PAD_CFG_NF(GPD9, NONE, DEEP, NF1), +}; + +const struct pad_config *variant_override_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* C8 : UART0 RX */ + PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), + /* C9 : UART0 TX */ + PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), + + /* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */ + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1), + /* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */ + /* assert reset on reboot */ + PAD_CFG_GPO(GPP_A13, 0, DEEP), + /* A17 : DDSP_HPDC ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_A17, NONE, DEEP), + + /* B2 : VRALERT# ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_B2, 1, DEEP), + /* B11 : PMCALERT# ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP), + /* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */ + PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1), + /* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */ + PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1), + /* B17 : GSPI0_MISO ==> PCH_GSPIO_H1_TPM_MISO */ + PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1), + /* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */ + PAD_CFG_NF(GPP_B18, DN_20K, DEEP, NF1), + + /* C0 : SMBCLK ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_C0, 1, DEEP), + /* C21 : UART2_TXD ==> H1_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT), + /* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */ + PAD_CFG_GPO(GPP_C22, 0, DEEP), + + /* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */ + PAD_CFG_GPO(GPP_D16, 1, DEEP), +}; + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +/* GPIO settings before entering S5 */ +static const struct pad_config s5_sleep_gpio_table[] = { + PAD_CFG_GPO(GPP_C23, 0, DEEP), /* FPMCU_RST_ODL */ + PAD_CFG_GPO(GPP_A21, 0, DEEP), /* EN_FP_PWR */ +}; + +const struct pad_config *variant_sleep_gpio_table(u8 slp_typ, size_t *num) +{ + if (slp_typ == ACPI_S5) { + *num = ARRAY_SIZE(s5_sleep_gpio_table); + return s5_sleep_gpio_table; + } + *num = 0; + return NULL; +} diff --git a/src/mainboard/google/volteer/variants/volet/overridetree.cb b/src/mainboard/google/volteer/variants/volet/overridetree.cb index 32204c5..02546fd 100644 --- a/src/mainboard/google/volteer/variants/volet/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volet/overridetree.cb @@ -1,6 +1,219 @@ chip soc/intel/tigerlake + register "DdiPort1Hpd" = "0" + register "DdiPort2Hpd" = "0" + + register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-A / Type-C Cl + register "usb2_ports[8]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-A / Type-C C0 + + register "TcssAuxOri" = "1" + register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E10, .pad_auxn_dc = GPP_E13}" + + # Disable SRCCLKREQ1# + register "PcieClkSrcUsage[1]" = "PCIE_CLK_NOTUSED"
device domain 0 on + device ref i2c0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "0" + register "imon_slot_no" = "1" + register "uid" = "0" + register "desc" = ""Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 31 on + end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "2" + register "imon_slot_no" = "3" + register "uid" = "1" + register "desc" = ""Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 32 on + end + end + end + device ref i2c1 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN90FC"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "generic.reset_delay_ms" = "20" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + chip drivers/i2c/generic + register "hid" = ""RAYD0001"" + register "desc" = ""Raydium Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "probed" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "reset_delay_ms" = "1" + register "reset_off_delay_ms" = "2" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "enable_delay_ms" = "10" + register "enable_off_delay_ms" = "1" + register "has_power_resource" = "1" + device i2c 39 on end + end + end + device ref i2c2 on + chip drivers/i2c/sx9310 + register "desc" = ""SAR0 Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "0" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" + device i2c 28 on end + end + end + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "probed" = "1" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "generic.wake" = "GPE0_DW2_15" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end + end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pcie_rp9 on + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)" + register "srcclk_pin" = "0" + device generic 0 on end + end + end + # This variant has USB4/PCIe on both ports so RP0 must be enabled + # in order for hotplug resources to be assigned to Type-C Port C0. + device ref tbt_pcie_rp0 on + probe DB_USB USB4_GEN3 + end + device ref pmc hidden + # The pmc_mux chip driver is a placeholder for the + # PMC.MUX device in the ACPI hierarchy. + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "9" + register "usb3_port_number" = "1" + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "4" + register "usb3_port_number" = "2" + # SBU is fixed, HSL follows CC + register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" + device generic 1 alias conn1 on end + end + end + end + end + device ref north_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(3, 2)" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 2)" + device ref tcss_usb3_port2 on end + end + end + end + end + device ref south_xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A1 (DB)"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device ref usb2_port2 on + probe DB_USB USB4_GEN3 + end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(2, 1)" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port5 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(3, 1)" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A1 (DB)"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device ref usb3_port2 on + probe DB_USB USB4_GEN3 + end + end + end + end + end end - end
-
Sheng-Liang Pan (Code Review)