Patch set updated for coreboot: [UNTESTED] lenovo/T400: correct GPIO for hybrid driver

[Arthur Heymans]

Arthur Heymans ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16354

-gerrit

commit 39d80aaebd4eb5668686b045889ee6cd6be6adc1
Author: Arthur Heymans 
Date:   Tue Aug 30 13:42:33 2016 +0200

[UNTESTED] lenovo/T400: correct GPIO for hybrid driver

Currently the hybrid driver uses GPIO 52 to configure mux. This is not
    the right GPIO on the T400 according to the schematics "MALIBU-3 EXT".
    It should be GPIO22.

Previously also gpio 49 (GFX_PWR_EN), 19 (BKLT_CTRL_SEL),
    17 (DGFX_PWRGD) were configured for hybrid graphics to
    work on T400, but this was reverted in 14d1a93e: "Revert
    mainboard/lenovo/t400: Add initial hybrid graphics support". It is
    unknown if this is also needed.

Change-Id: I3167303abeb6b3711d53508c61a340d03b1e050a
    Signed-off-by: Arthur Heymans 
---
 src/mainboard/lenovo/t400/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/src/mainboard/lenovo/t400/Kconfig b/src/mainboard/lenovo/t400/Kconfig
index a444bf8..6ea66bd 100644
--- a/src/mainboard/lenovo/t400/Kconfig
+++ b/src/mainboard/lenovo/t400/Kconfig
@@ -56,4 +56,8 @@ config ONBOARD_VGA_IS_PRIMARY
    bool
    default y

+config HYBRID_GRAPHICS_GPIO_NUM
+	int
+	default 22
+
 endif # BOARD_LENOVO_T400