[S] Change in coreboot[main]: mb/google/nissa/var/pujjoga: Update touchscreen IC settings

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/82427?usp=email )

Change subject: mb/google/nissa/var/pujjoga: Update touchscreen IC settings
......................................................................

mb/google/nissa/var/pujjoga: Update touchscreen IC settings

Modify the Goodix touchscreen from new vendor and remove 3 unused
touchscreens. According to the information provided by the key-part
team.

BUG=b:340689681
TEST=Build and check Goodix touchscreen can work.

Change-Id: I1e6349e80431aadf27cd72b8439b01f95348071d
Signed-off-by: Roger Wang 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82427
Reviewed-by: Paul Menzel 
Tested-by: build bot (Jenkins) 
Reviewed-by: Subrata Banik 
Reviewed-by: Eric Lai 
---
M src/mainboard/google/brya/variants/pujjoga/overridetree.cb
1 file changed, 7 insertions(+), 40 deletions(-)

Approvals:
  Paul Menzel: Looks good to me, but someone else must approve
  Eric Lai: Looks good to me, approved
  Subrata Banik: Looks good to me, approved
  build bot (Jenkins): Verified

diff --git a/src/mainboard/google/brya/variants/pujjoga/overridetree.cb b/src/mainboard/google/brya/variants/pujjoga/overridetree.cb
index 2804e16..5641b06 100644
--- a/src/mainboard/google/brya/variants/pujjoga/overridetree.cb
+++ b/src/mainboard/google/brya/variants/pujjoga/overridetree.cb
@@ -146,53 +146,20 @@
    device domain 0 on
    	device ref i2c1 on
    		chip drivers/i2c/hid
-				register "generic.hid" = ""ELAN901C""
-				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
    			register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
    			register "generic.detect" = "1"
-				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
-				register "generic.reset_delay_ms" = "20"
-				register "generic.reset_off_delay_ms" = "2"
-				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
-				register "generic.stop_delay_ms" = "280"
-				register "generic.stop_off_delay_ms" = "2"
    			register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
-				register "generic.enable_delay_ms" = "1"
-				register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x01"
-				device i2c 10 on end
-			end
-			chip drivers/i2c/hid
-				register "generic.hid" = ""PARA3406""
-				register "generic.desc" = ""Parade Touchscreen""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
-				register "generic.detect" = "1"
+				register "generic.enable_delay_ms" = "20"
    			register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
-				register "generic.reset_delay_ms" = "20"
-				register "generic.reset_off_delay_ms" = "2"
+				register "generic.reset_delay_ms" = "180"
+				register "generic.reset_off_delay_ms" = "3"
    			register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
-				register "generic.stop_delay_ms" = "280"
-				register "generic.stop_off_delay_ms" = "2"
-				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
-				register "generic.enable_delay_ms" = "1"
+				register "generic.stop_off_delay_ms" = "1"
    			register "generic.has_power_resource" = "1"
    			register "hid_desc_reg_offset" = "0x01"
-				device i2c 24 on end
-			end
-			chip drivers/i2c/hid
-				register "generic.hid" = ""GTCH7503""
-				register "generic.desc" = ""G2TOUCH Touchscreen""
-				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
-				register "generic.detect" = "1"
-				register "generic.reset_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
-				register "generic.reset_delay_ms" = "50"
-				register "generic.enable_gpio" =
-							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
-				register "generic.enable_delay_ms" = "1"
-				register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x01"
-				device i2c 40 on end
+				device i2c 5d on end
    		end
    		chip drivers/generic/gpio_keys
    			register "name" = ""PENH""