Change in coreboot[master]: mb/google/brya/var/brya0: Swap TPM and touchscreen I2C bus

[Amanda Hwang (Code Review)]

Attention is currently required from: Frank Wu, Paul Menzel, Felix Held.
Amanda Hwang has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/63709 )

Change subject: mb/google/brya/var/brya0: Swap TPM and touchscreen I2C bus
......................................................................

Patch Set 3:

(1 comment)

File src/mainboard/google/brya/variants/brya0/gpio.c:

https://review.coreboot.org/c/coreboot/+/63709/comment/3860afda_fa5f775a 
PS1, Line 132: /*
             : 	* D1  : ISH_GP1 ==> FP_RST_ODL
             : 	* FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
             : 	* To ensure proper power sequencing for the FPMCU device, reset signal is driven low
             : 	* early on in bootblock, followed by enabling of power. Reset signal is deasserted
             : 	* later on in ramstage. Since reset signal is asserted in bootblock, it results in
             : 	* FPMCU not working after a S3 resume. This is a known issue.
             : 	*/
> Please wrap the lines earlier, and also follow the [commenting style](https://doc.coreboot. […]

Done