David Hendricks (dhendrix@chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3116
-gerrit
commit 24620d6058719d53fb0cf54504bd5879c74b1806 Author: Ronald G. Minnich rminnich@gmail.com Date: Thu Apr 18 18:09:24 2013 -0700
GOOGLE/SNOW: get graphics working
This adds preliminary support for display bring-up on Snow. It includes framebuffer initialization and LCD enable functions.
Change-Id: I16e711c97e9d02c916824f621e2313297448732b Signed-off-by: Ronald G. Minnich rminnich@gmail.com Signed-off-by: David Hendricks dhendrix@chromium.org --- src/cpu/samsung/exynos5-common/exynos-fb.c | 84 ++++++++++++++++++++++++----- src/cpu/samsung/exynos5-common/s5p-dp-reg.c | 10 ++-- src/cpu/samsung/exynos5250/cpu.c | 25 +++++++-- src/mainboard/google/snow/Kconfig | 2 + src/mainboard/google/snow/chromeos.c | 7 ++- src/mainboard/google/snow/ramstage.c | 34 ++++++++++++ 6 files changed, 142 insertions(+), 20 deletions(-)
diff --git a/src/cpu/samsung/exynos5-common/exynos-fb.c b/src/cpu/samsung/exynos5-common/exynos-fb.c index 54a2d7a..cdb5881 100644 --- a/src/cpu/samsung/exynos5-common/exynos-fb.c +++ b/src/cpu/samsung/exynos5-common/exynos-fb.c @@ -27,6 +27,7 @@ #include <arch/io.h> #include <stdlib.h> #include <string.h> +#include <time.h> #include <console/console.h> #include <cpu/samsung/exynos5250/cpu.h> #include <cpu/samsung/exynos5250/power.h> @@ -41,6 +42,28 @@ #include "cpu/samsung/exynos5250/s5p-dp.h" #include "s5p-dp-core.h"
+/* + * Here is the rough outline of how we bring up the display: + * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD + * 2. Source determines video mode by reading DPCD receiver capability field + * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD + * 0000Dh). + * 3. Sink replies DPCD receiver capability field. + * 4. Source starts EDID read thru I2C-over-AUX. + * 5. Sink replies EDID thru I2C-over-AUX. + * 6. Source determines link configuration, such as MAX_LINK_RATE and + * MAX_LANE_COUNT. Source also determines which type of eDP Authentication + * method to use and writes DPCD link configuration field (DPCD 00100h to + * 0010Ah) including eDP configuration set (DPCD 0010Ah). + * 7. Source starts link training. Sink does clock recovery and equalization. + * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). + * 9. Sink replies DPCD link status field. If main link is not stable, Source + * repeats Step 7. + * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video + * parameters and recovers stream clock. + * 11. Source sends video data. + */ + /* To help debug any init errors here, define a list of possible errors */ enum { ERR_PLL_NOT_UNLOCKED = 2, @@ -126,38 +149,54 @@ void fb_init(vidinfo_t *panel_info, void *lcdbase, { unsigned int val; u32 fbsize; - struct exynos5_fimd *fimd = - samsung_get_base_fimd(); - struct exynos5_disp_ctrl *disp_ctrl = - samsung_get_base_disp_ctrl(); - + struct exynos5_fimd *fimd = samsung_get_base_fimd(); + struct exynos5_disp_ctrl *disp_ctrl = samsung_get_base_disp_ctrl(); + + printk(BIOS_SPEW, "%s: fimd %p disp_ctrl %p\n", + __func__, fimd, disp_ctrl); + printk(BIOS_SPEW, "pd %p\n", pd); + printk(BIOS_SPEW, "lcdbase %p\n", lcdbase); + printk(BIOS_SPEW, "pd->xres %d pd->yres %d\n", pd->xres, pd->yres); + printk(BIOS_SPEW, "Write %08x to %p\n", + pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1); writel(pd->ivclk | pd->fixvclk, &disp_ctrl->vidcon1); val = ENVID_ON | ENVID_F_ON | (pd->clkval_f << CLKVAL_F_OFFSET); + printk(BIOS_SPEW, "Write %08x to fimd->vidcon0\n", val); writel(val, &fimd->vidcon0);
val = (pd->vsync << VSYNC_PULSE_WIDTH_OFFSET) | (pd->lower_margin << V_FRONT_PORCH_OFFSET) | (pd->upper_margin << V_BACK_PORCH_OFFSET); + printk(BIOS_SPEW, "Write %08x to %p\n", val, &disp_ctrl->vidtcon0); writel(val, &disp_ctrl->vidtcon0);
val = (pd->hsync << HSYNC_PULSE_WIDTH_OFFSET) | (pd->right_margin << H_FRONT_PORCH_OFFSET) | (pd->left_margin << H_BACK_PORCH_OFFSET); + printk(BIOS_SPEW, "Write %08x to %p\n", val, &disp_ctrl->vidtcon1); writel(val, &disp_ctrl->vidtcon1);
val = ((pd->xres - 1) << HOZVAL_OFFSET) | ((pd->yres - 1) << LINEVAL_OFFSET); + printk(BIOS_SPEW, "Write %08x to %p\n", val, &disp_ctrl->vidtcon2); writel(val, &disp_ctrl->vidtcon2);
+ printk(BIOS_SPEW, "Write %08x to %p\n", + (unsigned int)lcdbase, &fimd->vidw00add0b0); writel((unsigned int)lcdbase, &fimd->vidw00add0b0);
fbsize = calc_fbsize(panel_info); + printk(BIOS_SPEW, "Write %08x to %p\n", + (unsigned int)fbsize, &fimd->vidw00add1b0); writel((unsigned int)lcdbase + fbsize, &fimd->vidw00add1b0);
+ printk(BIOS_SPEW, "Write %08x to %p\n", + (unsigned int)pd->xres*2, &fimd->vidw00add0b0); writel(pd->xres * 2, &fimd->vidw00add2);
val = ((pd->xres - 1) << OSD_RIGHTBOTX_F_OFFSET); val |= ((pd->yres - 1) << OSD_RIGHTBOTY_F_OFFSET); + printk(BIOS_SPEW, "Write %08x to %p\n", val, &fimd->vidosd0b); writel(val, &fimd->vidosd0b); writel(pd->xres * pd->yres, &fimd->vidosd0c);
@@ -165,6 +204,7 @@ void fb_init(vidinfo_t *panel_info, void *lcdbase,
val = BPPMODE_F_RGB_16BIT_565 << BPPMODE_F_OFFSET; val |= ENWIN_F_ENABLE | HALF_WORD_SWAP_EN; + printk(BIOS_SPEW, "Write %08x to %p\n", val, &fimd->wincon0); writel(val, &fimd->wincon0);
/* DPCLKCON_ENABLE */ @@ -191,7 +231,7 @@ static int s5p_dp_config_video(struct s5p_dp_device *dp, struct video_info *video_info) { int timeout = 0; - u32 start; + u32 start, end; struct exynos5_dp *base = dp->base;
s5p_dp_config_video_slave_mode(dp, video_info); @@ -206,16 +246,18 @@ static int s5p_dp_config_video(struct s5p_dp_device *dp, return -ERR_PLL_NOT_UNLOCKED; }
- start = get_timer(0); + start = timer_us(); + end = start + STREAM_ON_TIMEOUT*1000; do { if (s5p_dp_is_slave_video_stream_clock_on(dp) == 0) { timeout++; break; } - } while (get_timer(start) <= STREAM_ON_TIMEOUT); + } while (timer_us() < end);
if (!timeout) { - printk(BIOS_DEBUG, "Video Clock Not ok\n"); + printk(BIOS_DEBUG, "Video Clock Not ok after %uus.\n", + timer_us() - start); return -ERR_VIDEO_CLOCK_BAD; }
@@ -255,7 +297,6 @@ static int s5p_dp_enable_rx_to_enhanced_mode(struct s5p_dp_device *dp) printk(BIOS_DEBUG, "DPCD read error\n"); return -ERR_DPCD_READ_ERROR1; } - if (s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, DPCD_ENHANCED_FRAME_EN | (data & DPCD_LANE_COUNT_SET_MASK))) { @@ -408,6 +449,7 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, unsigned int max_lane, unsigned int max_rate) { + int pll_is_locked = 0; u32 data; u32 start; int lane; @@ -417,14 +459,15 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, clrbits_le32(&base->video_ctl_1, VIDEO_EN);
start = get_timer(0); - while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { + while ((pll_is_locked = s5p_dp_get_pll_lock_status(dp)) == PLL_UNLOCKED) { if (get_timer(start) > PLL_LOCK_TIMEOUT) { /* Ignore this error, and try to continue */ printk(BIOS_ERR, "PLL is not locked yet.\n"); break; } } - + printk(BIOS_SPEW, "PLL is %slocked\n", + pll_is_locked == PLL_LOCKED ? "": "not "); /* Reset Macro */ setbits_le32(&base->dp_phy_test, MACRO_RST);
@@ -448,6 +491,9 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, s5p_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate); s5p_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
+ printk(BIOS_SPEW, "%s: rate 0x%x, lane_count %d\n", __func__, + dp->link_train.link_rate, dp->link_train.lane_count); + if ((dp->link_train.link_rate != LINK_RATE_1_62GBPS) && (dp->link_train.link_rate != LINK_RATE_2_70GBPS)) { printk(BIOS_DEBUG, "Rx Max Link Rate is abnormal :%x !\n", @@ -470,21 +516,27 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp, dp->link_train.link_rate = max_rate;
/* Set link rate and count as you want to establish*/ + printk(BIOS_SPEW, "Set link rate and count\n"); writel(dp->link_train.lane_count, &base->lane_count_set); writel(dp->link_train.link_rate, &base->link_bw_set);
/* Set sink to D0 (Sink Not Ready) mode. */ + printk(BIOS_SPEW, "Set sink rate to D0\n"); s5p_dp_write_byte_to_dpcd(dp, DPCD_ADDR_SINK_POWER_STATE, DPCD_SET_POWER_STATE_D0);
/* Start HW link training */ + printk(BIOS_SPEW, "Start Link hardware training\n"); writel(HW_TRAINING_EN, &base->dp_hw_link_training);
- /* Wait unitl HW link training done */ + /* Wait until HW link training done */ + printk(BIOS_SPEW, "Wait until HW link training done\n"); s5p_dp_wait_hw_link_training_done(dp); + printk(BIOS_SPEW, "HW link training done\n");
/* Get hardware link training status */ data = readl(&base->dp_hw_link_training); + printk(BIOS_SPEW, "hardware link training status: 0x%08x\n", data); if (data != 0) { printk(BIOS_DEBUG, " H/W link training failure: 0x%x\n", data); return -ERR_LINK_TRAINING_FAILURE; @@ -497,6 +549,8 @@ static int s5p_dp_hw_link_training(struct s5p_dp_device *dp,
data = readl(&base->lane_count_set); dp->link_train.lane_count = data; + printk(BIOS_SPEW, "Done training: Link bandwidth: 0x%x, lane_count: %d\n", + dp->link_train.link_rate, data);
return 0; } @@ -533,12 +587,14 @@ int dp_controller_init(struct s5p_dp_device *dp_device) /* Minimum delay after H/w Link training */ udelay(1000);
+ printk(BIOS_DEBUG, "call s5p_dp_enable_scramble\n"); ret = s5p_dp_enable_scramble(dp); if (ret) { printk(BIOS_DEBUG, "unable to set scramble mode\n"); return ret; }
+ printk(BIOS_DEBUG, "call s5p_dp_enable_rx_to_enhanced_mode\n"); ret = s5p_dp_enable_rx_to_enhanced_mode(dp); if (ret) { printk(BIOS_DEBUG, "unable to set enhanced mode\n"); @@ -553,7 +609,9 @@ int dp_controller_init(struct s5p_dp_device *dp_device) writel(dp->link_train.lane_count, &base->lane_count_set); writel(dp->link_train.link_rate, &base->link_bw_set);
+ printk(BIOS_DEBUG, "call s5p_dp_init_video\n"); s5p_dp_init_video(dp); + printk(BIOS_DEBUG, "call s5p_dp_config_video\n"); ret = s5p_dp_config_video(dp, dp->video_info); if (ret) { printk(BIOS_DEBUG, "unable to config video\n"); diff --git a/src/cpu/samsung/exynos5-common/s5p-dp-reg.c b/src/cpu/samsung/exynos5-common/s5p-dp-reg.c index 60e1398..6b5cd69 100644 --- a/src/cpu/samsung/exynos5-common/s5p-dp-reg.c +++ b/src/cpu/samsung/exynos5-common/s5p-dp-reg.c @@ -102,6 +102,8 @@ unsigned int s5p_dp_get_pll_lock_status(struct s5p_dp_device *dp) u32 reg;
reg = readl(&dp->base->dp_debug_ctl); + printk(BIOS_SPEW, "%s: reg is 0x%x, PLL_LOCK is 0x%x\n", + __func__, reg, PLL_LOCK); if (reg & PLL_LOCK) return PLL_LOCKED; else @@ -129,7 +131,8 @@ int s5p_dp_init_analog_func(struct s5p_dp_device *dp) start = get_timer(0); while (s5p_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) { if (get_timer(start) > PLL_LOCK_TIMEOUT) { - printk(BIOS_DEBUG, "%s: PLL is not locked yet\n", __func__); + printk(BIOS_DEBUG, "%s: PLL is not locked\n", + __func__); return -1; } } @@ -176,8 +179,9 @@ int s5p_dp_start_aux_transaction(struct s5p_dp_device *dp) /* Enable AUX CH operation */ setbits_le32(&base->aux_ch_ctl_2, AUX_EN);
- printk(BIOS_DEBUG, "%s: base: 0x%p, &base->aux_ch_ctl_2: 0x%p, aux_ch_ctl_2: 0x%08x\n", - __func__, base, &base->aux_ch_ctl_2, readl(&base->aux_ch_ctl_2)); + printk(BIOS_DEBUG, "%s: base: 0x%p, &base->aux_ch_ctl_2: 0x%p, " + "aux_ch_ctl_2: 0x%08x\n", __func__, base, &base->aux_ch_ctl_2, + readl(&base->aux_ch_ctl_2));
/* Is AUX CH command reply received? */ reg = readl(&base->dp_int_sta); diff --git a/src/cpu/samsung/exynos5250/cpu.c b/src/cpu/samsung/exynos5250/cpu.c index 09b670e..677b0f4 100644 --- a/src/cpu/samsung/exynos5250/cpu.c +++ b/src/cpu/samsung/exynos5250/cpu.c @@ -5,6 +5,7 @@ #include <console/console.h> #include <device/device.h> #include <cbmem.h> +#include <arch/cache.h> #include <cpu/samsung/exynos5250/fimd.h> #include <cpu/samsung/exynos5-common/s5p-dp-core.h> #include "chip.h" @@ -32,7 +33,6 @@ static void exynos_displayport_init(device_t dev) unsigned long int fb_size; u32 lcdbase;
- printk(BIOS_SPEW, "%s: dev 0x%p, conf 0x%p\n", __func__, dev, conf); memset(&vi, 0, sizeof(vi)); memset(&panel, 0, sizeof(panel));
@@ -61,16 +61,35 @@ static void exynos_displayport_init(device_t dev) * The size is a magic number from hardware. Allocate enough for the * frame buffer and color map. */ - fb_size = conf->xres * conf->yres * sizeof(unsigned long); + fb_size = conf->xres * conf->yres * (conf->bpp / 8); lcdbase = (uintptr_t)cbmem_add(CBMEM_ID_CONSOLE, fb_size + 64*KiB); printk(BIOS_SPEW, "lcd colormap base is %p\n", (void *)(lcdbase)); mmio_resource(dev, 0, lcdbase/KiB, 64); vi.cmap = (void *)lcdbase;
+ /* + * We need to clean and invalidate the framebuffer region and disable + * caching as well. We assume that our dcache <--> memory address + * space is identity-mapped in 1MB chunks, so align accordingly. + * + * Note: We may want to do something clever to ensure the framebuffer + * region is aligned such that we don't change dcache policy for other + * stuff inadvertantly. + * + * FIXME: Is disabling/re-enabling the MMU entirely necessary? + */ + uint32_t lower = ALIGN_DOWN(lcdbase, MiB); + uint32_t upper = ALIGN_UP(lcdbase + fb_size + 64*KiB, MiB); + dcache_clean_invalidate_by_mva(lower, upper - lower); + dcache_mmu_disable(); + mmu_config_range(lower/MiB, (upper - lower)/MiB, DCACHE_OFF); + dcache_mmu_enable(); + lcdbase += 64*KiB; mmio_resource(dev, 1, lcdbase/KiB, fb_size + (KiB-1)/KiB); printk(BIOS_DEBUG, - "Initializing exynos VGA, base %p\n",(void *)lcdbase); + "Initializing exynos VGA, base %p\n", (void *)lcdbase); + memset((void *)lcdbase, 0, fb_size); /* clear the framebuffer */ ret = lcd_ctrl_init(&vi, &panel, (void *)lcdbase); }
diff --git a/src/mainboard/google/snow/Kconfig b/src/mainboard/google/snow/Kconfig index 6d3d7c8..c28a986 100644 --- a/src/mainboard/google/snow/Kconfig +++ b/src/mainboard/google/snow/Kconfig @@ -33,6 +33,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy select EXYNOS_DISPLAYPORT select CHROMEOS select DRIVER_TI_TPS65090 + select MAINBOARD_HAS_NATIVE_VGA_INIT + select MAINBOARD_DO_NATIVE_VGA_INIT
config MAINBOARD_DIR string diff --git a/src/mainboard/google/snow/chromeos.c b/src/mainboard/google/snow/chromeos.c index 6e46d13..c4e6ef4 100644 --- a/src/mainboard/google/snow/chromeos.c +++ b/src/mainboard/google/snow/chromeos.c @@ -98,7 +98,12 @@ void fill_lb_gpios(struct lb_gpios *gpios)
int get_developer_mode_switch(void) { - return 0; + /* + * FIXME: This should return 0, but we hardcode it to 1 to ensure + * coreboot draws the dev mode screen while we're working on this + * patch. + */ + return 1; }
int get_recovery_mode_switch(void) diff --git a/src/mainboard/google/snow/ramstage.c b/src/mainboard/google/snow/ramstage.c index 1cd84e8..f14c803 100644 --- a/src/mainboard/google/snow/ramstage.c +++ b/src/mainboard/google/snow/ramstage.c @@ -23,6 +23,7 @@ #include <drivers/ti/tps65090/tps65090.h> #include <cbmem.h> #include <delay.h> +#include <boot/coreboot_tables.h> #include <arch/cache.h> #include <arch/exception.h> #include <arch/gpio.h> @@ -41,6 +42,39 @@ #define DRAM_SIZE CONFIG_DRAM_SIZE_MB #define DRAM_END (DRAM_START + DRAM_SIZE) /* plus one... */
+int vbe_mode_info_valid(void); +int vbe_mode_info_valid(void) +{ + return 1; +} + +void fill_lb_framebuffer(struct lb_framebuffer *framebuffer); +void fill_lb_framebuffer(struct lb_framebuffer *framebuffer) +{ + /* + * The address returned points at the LCD colormap base. The + * 64KiB offset points at the LCD base. + */ + framebuffer->physical_address = + (u32)cbmem_find(CBMEM_ID_CONSOLE) + 64*KiB; + printk(BIOS_SPEW, "%s: framebuffer->physical address is 0x%llx\n", + __func__, framebuffer->physical_address); + + framebuffer->x_resolution = 1366; + framebuffer->y_resolution = 768; + framebuffer->bytes_per_line = 1366*2; /* FIXME: is this correct? */ + framebuffer->bits_per_pixel = 16; + framebuffer->red_mask_pos = 11; + framebuffer->red_mask_size = 5; + framebuffer->green_mask_pos = 6; + framebuffer->green_mask_size = 5; + framebuffer->blue_mask_pos = 0; + framebuffer->blue_mask_size = 5; + framebuffer->reserved_mask_pos = 0; + framebuffer->reserved_mask_size = 0; +} + + void hardwaremain(int boot_complete); void main(void) {
-
David Hendricks