[XS] Change in coreboot[main]: [Test] mb/google/rex/var/karis: Correct touchscreen settings

[Tyler Wang (Code Review)]

Tyler Wang has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/78266?usp=email )

Change subject: [Test] mb/google/rex/var/karis: Correct touchscreen settings
......................................................................

[Test] mb/google/rex/var/karis: Correct touchscreen settings

Confirmed with vender, will correct below settings:
HID: ELAN9004
HID Descriptor Address: 0x0001

Change-Id: I6ebb02540c894460388b9b9fe03f5c4031f8186d
---
M src/mainboard/google/rex/variants/karis/overridetree.cb
1 file changed, 2 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/78266/1

diff --git a/src/mainboard/google/rex/variants/karis/overridetree.cb b/src/mainboard/google/rex/variants/karis/overridetree.cb
index 98769de..6c0333c 100644
--- a/src/mainboard/google/rex/variants/karis/overridetree.cb
+++ b/src/mainboard/google/rex/variants/karis/overridetree.cb
@@ -366,7 +366,7 @@
    	end #I2C0
    	device ref i2c1 on
    		chip drivers/i2c/hid
-				register "generic.hid" = ""ELAN90FC""
+				register "generic.hid" = ""ELAN9004""
    			register "generic.desc" = ""ELAN Touchscreen""
    			register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C07_IRQ)"
    			register "generic.detect" = "1"
@@ -379,7 +379,7 @@
    			register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C06)"
    			register "generic.stop_off_delay_ms" = "1"
    			register "generic.has_power_resource" = "1"
-				register "hid_desc_reg_offset" = "0x01"
+				register "hid_desc_reg_offset" = "0x0001"
    			device i2c 0x10 on end
    		end
    		chip drivers/generic/gpio_keys